Pogoplug E02 can't boot Debian February 11, 2014 11:48AM |
Registered: 10 years ago Posts: 38 |
Disk /dev/sda: 4007 MB, 4007657472 bytes 124 heads, 62 sectors/track, 1018 cylinders, total 7827456 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003c62e Device Boot Start End Blocks Id System /dev/sda1 62 6842319 3421129 83 Linux /dev/sda2 6842320 7826383 492032 82 Linux swap / SolarisAfter installation the boot folder seems ok, it contains both uImage and uInitrd.
Re: Pogoplug E02 can't boot Debian February 11, 2014 05:11PM |
Registered: 10 years ago Posts: 38 |
./mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-2.6.32-5-kirkwood -d ../../boot/vmlinuz-2.6.32-5-kirkwood ../../boot/uImage ./mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-2.6.32-5-kirkwood -d ../../boot/initrd.img-2.6.32-5-kirkwood ../../boot/uInitrd
Re: Pogoplug E02 can't boot Debian February 11, 2014 10:47PM |
Admin Registered: 13 years ago Posts: 18,607 |
Re: Pogoplug E02 can't boot Debian February 12, 2014 12:55PM |
Registered: 10 years ago Posts: 38 |
Re: Pogoplug E02 can't boot Debian March 12, 2014 06:05AM |
Registered: 10 years ago Posts: 1 |
unfortunately without success. Any idea?
cd /tmp wget http://jeff.doozan.com/debian/uboot/install_uboot_mtd0.sh chmod +x install_uboot_mtd0.sh ./install_uboot_mtd0.sh