Welcome! Log In Create A New Profile

Advanced

Pogoplug E02 Won't Boot From USB

Posted by lewy1 
Pogoplug E02 Won't Boot From USB
March 14, 2014 03:45AM
Hi,
I have the new uboot installed and in the past had no problem booting Debian from a USB drive, but recently I tried a few times with Bodhi's latest rootfs image and for some reason it won't boot. Here is the output from/usr/sbin/fw_printenv

Pogoplug:~$ /usr/sbin/fw_printenv
ethact=egiga0
bootdelay=3
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
stdin=serial
stdout=serial
stderr=serial
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs
ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; na
nd read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /
rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd
; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0
:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && u
bifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm
0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if t
est $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_
scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; se
tenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootfstype=ext2
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_
rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext
2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; el
se bootm 0x800000; fi
bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd;
 usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ethaddr=00:25:31:00:18:5D
arcNumber=2998
serverip=10.0.1.144
ipaddr=10.0.1.7
if_netconsole=ping $serverip
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; se
tenv stdout nc; setenv stderr nc; version;
preboot=run if_netconsole start_netconsole
Pogoplug:~$
Re: Pogoplug E02 Won't Boot From USB
March 14, 2014 04:05AM
lewy1,

- Make sure to extract the rootfs as root user.
- If you have netconsole log, please post. Your U-Boot envs look OK.
- The prompt seems to indicate that you've booted into Pogo OS?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Re: Pogoplug E02 Won't Boot From USB
March 19, 2014 01:53PM
@ Bodhi,

I got everything working now. As you noticed I had booted in to the Pogo OS because debian was not booting, but I have it worked out now. I appreciate the help.
Author:

Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: