Welcome! Log In Create A New Profile

Advanced

Linux Kernel 4.14.198 Oxnas (OX820) Pogo V3 package and Debian rootfs

Posted by bodhi 
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
March 03, 2019 10:45PM
Kernel linux-4.4.176-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

Note: this kernel version fixed the reboot problem in kernel inux-4.4.174-oxnas-tld-1.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
August 21, 2019 11:54PM
Kernel linux-4.4.189-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
November 16, 2019 07:09PM
Kernel linux-4.4.201-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 11/17/2019 03:59AM by bodhi.
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
April 26, 2020 11:39PM
Kernel linux-4.14.176-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

If you are installing on the Pogo V3 Pro, see the instruction to download the newer DTB for this box in the release notes.

-bodhi
===========================
Forum Wiki
bodhi's corner



Edited 1 time(s). Last edit at 05/06/2020 04:28AM by bodhi.
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 14, 2020 04:20AM
Kernel linux-4.14.180-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 14, 2020 09:50PM
worked with no errors here:)

Thanks for your expert work!

learning is living! Echowarrior108



device pogoplug-pro v3

Debian GNU/Linux bullseye/sid \n \l
Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6) ) #1 SMP PREEMPT Fri Nov 15 04:12:45 PST 2019



Edited 1 time(s). Last edit at 05/14/2020 09:52PM by echowarrior108.
Re: Linux Kernel 4.4.174 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 14, 2020 10:22PM
Thanks for the feedback echowarrior108!

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 17, 2020 06:19PM
Debian buster rootfs Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 was uploaded. Please see 1st post for download link.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 23, 2020 10:33PM
Last posts moved to a new thread:

https://forum.doozan.com/read.php?2,103254

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.14.180 Oxnas (OX820) Pogo V3 package and Debian rootfs
May 23, 2020 10:36PM
This thread is temporarily closed until the next release.

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Linux Kernel 4.14.198 Oxnas (OX820) Pogo V3 package and Debian rootfs
October 02, 2020 09:18PM
Kernel linux-4.14.198-oxnas-tld-1 package was uploaded. Please see 1st post for download link.

-bodhi
===========================
Forum Wiki
bodhi's corner
I have followed your excellent guides to reconfigure my PogoPlug B03 OXNAS [I thought I had bought an EO2 but when it arrived I realised it was a V2 case with a V3 board). I have loaded the latest U-Boot successfully ( U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 and have been able to boot openWRT via tftp as well as following the rescue instructions to allow my plug to boot from the original linux partition. In the main, I am using a serial console plugged in to this device but I can access the booted platforms with putty across the network too.

I have tried installing what I believe is the latest Debian from your instructions here

## Booting kernel from Legacy Image at 60500000 ...
   Image Name:   Linux-4.14.180-oxnas-tld-1
   Created:      1970-01-01   0:16:36 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4609276 Bytes = 4.4 MiB
   Load Address: 60008000
   Entry Point:  60008000
   Verifying Checksum ... OK

During the boot process, I saw this message sequence
[    3.780710] hctosys: unable to open rtc device (rtc0)
[    3.786608] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    3.794099] Please append a correct "root=" boot option; here are the available partitions:
[    3.802534] 1f00           14336 mtdblock0
[    3.802544]  (driver?)
[    3.809144] 1f01          116736 mtdblock1
[    3.809152]  (driver?)
[    3.815741] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    3.823997] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1
[    3.831111] Hardware name: Generic DT based system

The last two lines on the serial console before it hangs completely are:
[    4.008005] [<c014a270>] (cpu_startup_entry) from [<60101868>] (0x60101868)
[    4.014958] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

The USB stick is EXT3 formatted 8GB capacity/partition. I blanked the stick and formatted it on a system which uses Zorin. On my last attempt to create the Boot drive, I extracted the files and linked (ox820-pogoplug-classic.dtb) using the the new kernel on the Pogoplug B03 via the serial console command prompt.

Anyone got any thoughts on where I should be looking?

Thanks - Bob
From a quick look it appears you forgot the step to label the USB ext3 partition as rootfs. On another Linux system insert the USB stick and run the following commands as root user (these assume your Linux system assigns sdc to the USB device):

# e2label /dev/sdc1 rootfs
# e2label /dev/sdc1

The second command should return the "rootfs" value. If so labeling was successful. Now eject the USB stick and move it to you Pogoplug and power on. It should now boot successfully. If it does not please post the entire console log.

Ray
Re: Pogo B03 Hangs on boot - VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
October 25, 2020 07:57PM
BobM,

Please create a new thread in Debian subforum.

And Ray please re-post response in that thread.

Thanks guy!

-bodhi
===========================
Forum Wiki
bodhi's corner
Re: Pogo B03 Hangs on boot - VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
October 26, 2020 04:18PM
This thread is temporarily closed until the next release.

Please create new thread for booting problem.

-bodhi
===========================
Forum Wiki
bodhi's corner
Sorry, you can't reply to this topic. It has been closed.