Need help troubleshooting GFH that suddenly stopped booting from a SATA drive September 05, 2014 10:57PM |
Registered: 11 years ago Posts: 36 |
Reset IDE: BUS 0: .......................................OK Bus1: not available ** Bad partition 1** ** Bad partition 1** Wrong Image Format for bootm command ERROR: can't get kernel image!
bootcmd_sata=run sata_init; run sata_load_uimage; run set_bootargs_sata; run sata_boot; console=ttyS0,115200 mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) set_bootargs_sata=setenv bootargs console=$console root=$sata_root rootdelay=$sata_rootdelay rootfstype=$sata_rootfstype $mtdparts sata_boot=if ext2load ide $sata_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000;else bootm 0x800000;fi; sata_device=0:1 sata_init=ide reset sata_load_uimage=mw 0x800000 0 1; ext2load ide $sata_device 0x800000 /boot/uImage sata_root=/dev/sda1 sata_rootdelay=8 sata_rootfstype=ext3
GoFlexNet> ide reset Reset IDE: Bus0: ....................................** Timeout **
Re: Need help troubleshooting GFH that suddenly stopped booting from a SATA drive September 06, 2014 02:45AM |
Admin Registered: 13 years ago Posts: 18,591 |
Floodo1@gmail.com
Re: Need help troubleshooting GFH that suddenly stopped booting from a SATA drive September 06, 2014 11:06AM |
Re: Need help troubleshooting GFH that suddenly stopped booting from a SATA drive October 10, 2014 02:22PM |
Registered: 10 years ago Posts: 168 |