How to setup RAID 1 on NSA-325? February 21, 2016 05:47AM |
Registered: 8 years ago Posts: 8 |
nrg@NSA-325:~$ sudo modprobe linear modprobe: ERROR: ../libkmod/libkmod.c:508 kmod_lookup_alias_from_builtin_file() could not open builtin file '/lib/modules/4.4.0-kirkwood-tld-1/modules.builtin.bin' modprobe: FATAL: Module linear not found. nrg@NSA-325:~$ cat /proc/mdstat cat: /proc/mdstat: No such file or directory nrg@NSA-325:~$ sudo service --status-all|grep mdadm [ ? ] cryptdisks [ ? ] cryptdisks-early [ ? ] hwclock.sh [ ? ] kmod [ - ] mdadm [ - ] mdadm-raid [ - ] mdadm-waitidle [ ? ] networking [ ? ] udev-finish nrg@NSA-325:~$
Re: How to setup RAID 1 on NSA-325? February 23, 2016 10:46AM |
Registered: 8 years ago Posts: 8 |
nrg@NSA-325:~$ sudo apt-get install mdadm Reading package lists... Done Building dependency tree Reading state information... Done Recommended packages: default-mta mail-transport-agent The following NEW packages will be installed: mdadm 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/400 kB of archives. After this operation, 1,039 kB of additional disk space will be used. Preconfiguring packages ... Package configuration ────────────────────────────────────────────────────────────────────────────────────────────────── ┌──────────────────────────────────────Configuring mdadm─────────────────────────────────────────┐ │ If the system's root file system is located on an MD array (RAID), it needs to be started │ │ early during the boot sequence. If it is located on a logical volume (LVM), which is on MD, │ │ all constituent arrays need to be started. │ │ │ │ If you know exactly which arrays are needed to bring up the root file system, and you want │ │ to postpone starting all other arrays to a later point in the boot sequence, enter the │ │ arrays to start here. Alternatively, enter 'all' to simply start all available arrays. │ │ │ │ If you do not need or want to start any arrays for the root file system, leave the answer │ │ blank (or enter 'none'). This may be the case if you are using kernel autostart or do not │ │ need any arrays to boot. │ │ │ │ Please enter 'all', 'none', or a space-separated list of devices such as 'md0 md1' or 'md/1 │ │ md/d0' (the leading '/dev/' can be omitted). │ │ │ │ MD arrays needed for the root file system: │ │ ┌────────────────────────────────────────────────────────────────────────────────────────────┐ │ │ │ │ │ ├─└────────────────────────────────────────────────────────────────────────────────────────────┘─┤ │ < OK > │ └────────────────────────────────────────────────────────────────────────────────────────────────┘ Selecting previously unselected package mdadm. (Reading database ... 45510 files and directories currently installed.) Preparing to unpack .../mdadm_3.3.2-5+deb8u1_armel.deb ... Unpacking mdadm (3.3.2-5+deb8u1) ... Processing triggers for man-db (2.7.0.2-5) ... Setting up mdadm (3.3.2-5+deb8u1) ... W: mdadm: failed to load MD subsystem. Generating mdadm.conf... done (failed to scan arrays; /proc probably not mounted). update-initramfs: deferring update (trigger activated) update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults [FAIL] Assembling MD arrays...failed (failed to load MD subsystem). update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Processing triggers for initramfs-tools (0.120) ... update-initramfs: Generating /boot/initrd.img-4.4.0-kirkwood-tld-1 W: mdadm: /etc/mdadm/mdadm.conf defines no arrays. W: mkconf: MD subsystem is not loaded, thus I cannot scan for arrays. W: mdadm: failed to auto-generate temporary mdadm.conf file. W: mdadm: no configuration file available. depmod: WARNING: could not open /var/tmp/mkinitramfs_znujrn/lib/modules/4.4.0-kirkwood-tld-1/modules.order: No such file or directory depmod: WARNING: could not open /var/tmp/mkinitramfs_znujrn/lib/modules/4.4.0-kirkwood-tld-1/modules.builtin: No such file or directory nrg@NSA-325:~$
Re: How to setup RAID 1 on NSA-325? February 23, 2016 12:40PM |
Admin Registered: 13 years ago Posts: 18,590 |
Re: How to setup RAID 1 on NSA-325? March 06, 2016 11:56AM |
Registered: 8 years ago Posts: 17 |