Re: Debian on CISCO ON100-K9 August 02, 2016 02:46PM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 02, 2016 10:49PM |
Admin Registered: 13 years ago Posts: 18,858 |
> J4 J6 3.3V | RXD | TXD | > GND > JTAG X|X|X|X|X|X|X|X|X|X| JP1 > X|X|X|X|X|X|X|X|X|X| GND | TXD | RXD | > 3.3V > ______________________________________________ > Front Edge Of Cisco ON100-K9 Board > >>
Re: Debian on CISCO ON100-K9 August 03, 2016 05:22AM |
Registered: 10 years ago Posts: 1,037 |
Re: Debian on CISCO ON100-K9 August 03, 2016 12:52PM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 10, 2016 03:47AM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 10, 2016 05:31AM |
Registered: 10 years ago Posts: 1,037 |
Re: Debian on CISCO ON100-K9 August 10, 2016 05:52AM |
Registered: 10 years ago Posts: 1,037 |
Re: Debian on CISCO ON100-K9 August 10, 2016 12:46PM |
Registered: 9 years ago Posts: 1,516 |
Re: Debian on CISCO ON100-K9 August 10, 2016 06:06PM |
Registered: 9 years ago Posts: 454 |
Re: Debian on CISCO ON100-K9 August 10, 2016 06:58PM |
Registered: 10 years ago Posts: 1,037 |
Re: Debian on CISCO ON100-K9 August 10, 2016 08:12PM |
Registered: 9 years ago Posts: 1,516 |
Re: Debian on CISCO ON100-K9 August 11, 2016 12:58AM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 11, 2016 01:01AM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 11, 2016 03:58PM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 11, 2016 04:14PM |
Registered: 9 years ago Posts: 454 |
Re: Debian on CISCO ON100-K9 August 11, 2016 08:35PM |
Registered: 9 years ago Posts: 1,516 |
Re: Debian on CISCO ON100-K9 August 11, 2016 09:06PM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 12, 2016 01:43AM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 12, 2016 06:11AM |
Registered: 9 years ago Posts: 298 |
Re: Debian on CISCO ON100-K9 August 12, 2016 11:01AM |
Registered: 9 years ago Posts: 1,516 |
Re: Debian on CISCO ON100-K9 August 12, 2016 10:25PM |
Registered: 9 years ago Posts: 1,516 |
ap_failSafeUpdate: Bundle download was successful - in terms of a successful transfer ... ap_failSafeUpdate: Downloaded the bundle fine, but the tar file is corrupt ap_failSafeUpdate: Failed attempt 39 to download the recovery file! ap_failSafeUpdate: Attempt #40 to retrieve http://failsafe.imageboot.com/failsafe/failsafe.html?model=ON100&mac=64:00:F1:20:FF:B6&serial=DNI15440BHM&pid=ON100-K9&vid=01 ap_failSafeUpdate: Bundle download was successful - in terms of a successful transfer ... ap_failSafeUpdate: Downloaded the bundle fine, but the tar file is corrupt ap_failSafeUpdate: Failed attempt 40 to download the recovery file! ap_failSafeUpdate: Attempt #41 to retrieve http://failsafe.imageboot.com/failsafe/failsafe.html?model=ON100&mac=64:00:F1:20:FF:B6&serial=DNI15440BHM&pid=ON100-K9&vid=01 ap_failSafeUpdate: Bundle download was successful - in terms of a successful transfer ... ap_failSafeUpdate: Downloaded the bundle fine, but the tar file is corrupt ap_failSafeUpdate: Failed attempt 41 to download the recovery file!
Button pressed : 16010 ms.####### # ### # ##### # ####### ####### # # # # # # # # # # # # # # # # # # # # # ##### # # # # ##### # # ##### ##### # ####### # # # ####### # # # # # # # # # # # # # # # # ### ####### ##### # # # ####### Set LED STATE to: failsafe Set LED STATE to: failsafe ap_failSafeUpdate: Beginning fail safe recovery ap_failSafeUpdate: Cleaning up left-over rogue processes ... should already have stopped
Re: Debian on CISCO ON100-K9 August 12, 2016 11:03PM |
Admin Registered: 13 years ago Posts: 18,858 |
Re: Debian on CISCO ON100-K9 August 12, 2016 11:05PM |
Registered: 9 years ago Posts: 1,516 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: DB-88F6282A-BP LE U-Boot 1.1.4 (Feb 22 2011 - 14:06:09) Marvell version: 3.5.9 - Cisco Plasma U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006D2340 Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM (DDR3) CAS Latency = 6 tRP = 6 tRAS = 15 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled Module 0 is RGMII USB 0: host mode PEX 0: interface detected no Link. PEX 1: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 ### JFFS2 loading 'boot.img' to 0x400000 Scanning JFFS2 FS: . done. ### JFFS2 load complete: 382 bytes loaded to 0x400000 ## Executing script at 00400000 "PLASMA Booting FIRST partition @ 0x400000" NAND read: device 0 offset 0x400000, size 0x600000 Reading data from 0x9ff800 -- 100% complete. 6291456 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.31.8PATCH-29 Created: 2011-06-01 21:56:16 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2323016 Bytes = 2.2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux..................................................................................................................................................... done, booting the kernel. Linux version 2.6.31.8PATCH-29 (jamwyatt@aesop) (gcc version 4.3.2 (sdk3.2rc1-ct-ng-1.4.1) ) #1 Wed Jun 1 16:56:06 CDT 2011 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048 Kernel command line: console=ttyS0,115200 max_loop=64 mtdparts=nand_mtd:2m(uBoot)ro,2m(dualboot),6m(kernel1),8m(rootfs1),6m(kernel2),8m(rootfs2),470m(datafs),-(misc) root=/dev/mtdblock3 ro serialNo=DNI15440BHM hwVer=ON100-K9_V01 ip=::::DB88FXX81:eth0:none rootfstype=jffs2 PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB = 512MB total Memory: 510592KB available (4348K code, 315K data, 124K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 1599.07 BogoMIPS (lpj=7995392) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 256MB SDRAM_CS1 ....base 10000000, size 256MB SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PEX1_MEM ....base e8000000, size 128MB PEX1_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.1.3_patch29)-- DB-88F6282A-BP Soc: 88F6282 A1 LE Detected Tclk 200000000 and SysClk 400000000 MV Buttons Device Load btns_init_data - plasma btns_init_data - Number of configured buttons: 1 Marvell USB EHCI Host controller #0: d0054740 PEX0 interface detected no Link. PEX1 interface detected no Link. PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 rtc mv_rtc: rtc core: registered kw-rtc as rtc0 RTC registered cpufreq: Init kirkwood cpufreq driver Kirkwood hwmon thermal sensor initialized. XOR registered 4 channels XOR 2nd invalidate WA enabled cesadev_init(c000c990) mvCesaInit: sessions=640, queue=64, pSram=f0000000 Warning: TS unit is powered off. MV Buttons Driver Load JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 997 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) alg: No test for hmac(digest_null) (hmac(digest_null-generic)) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) Initializing ths8200_init Initializing dove_adi9889_init Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled loop: module loaded Integrated Sata device found IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 2 Giga ports supported o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload (TSO) supported o Large Receive offload (LRO) supported o Receive checksum offload supported o Transmit checksum offload supported o Network Fast Processing (Routing) supported - (Disabled) o Driver ERROR statistics enabled o Proc tool API enabled o SKB Reuse supported - (Disabled) o SKB Recycle supported - (Disabled) o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): o register under mv88fx_eth platform o eth0, ifindex = 2, GbE port = 0 o eth1, ifindex = 3, GbE port = 1 mvFpRuleDb (d07f0000): 16384 entries, 65536 bytes Counter=0, opIdx=6, overhead=16 Counter=1, opIdx=2, overhead=0 Counter=2, opIdx=1, overhead=18 Counter=3, opIdx=2, overhead=0 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 1471 at 0x00000b7e0000 Bad eraseblock 1911 at 0x00000eee0000 Bad eraseblock 2539 at 0x000013d60000 Bad eraseblock 2854 at 0x0000164c0000 Bad eraseblock 3405 at 0x00001a9a0000 8 cmdlinepart partitions found on MTD device nand_mtd Using command line partition definition Creating 8 MTD partitions on "nand_mtd": 0x000000000000-0x000000200000 : "uBoot" 0x000000200000-0x000000400000 : "dualboot" 0x000000400000-0x000000a00000 : "kernel1" 0x000000a00000-0x000001200000 : "rootfs1" 0x000001200000-0x000001800000 : "kernel2" 0x000001800000-0x000002000000 : "rootfs2" 0x000002000000-0x00001f600000 : "datafs" 0x00001f600000-0x000020000000 : "misc" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat mice: PS/2 mouse device common for all mice i2c /dev entries driver Orion Watchdog Timer: Initial timeout 21 sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: plasma:green:s1 Registered led device: plasma:red:s1 Registered led device: plasma:green:s2 Registered led device: plasma:red:s2 GRE over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> rtc mv_rtc: setting system clock to 2016-08-13 12:25:31 UTC (1471091131) CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00020000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00040000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00060000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00080000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00100000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00120000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00140000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00160000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00180000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00200000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00220000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00240000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00260000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00280000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00300000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00320000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00340000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00360000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00380000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003e0000 has totlen 0xc != normal 0x0 VFS: Mounted root (jffs2 filesystem) readonly on device 31:3. Freeing init memory: 124K Creating R/W root Start up on R/W root Root Filesystem Version: 18.45 Set LED STATE to: init_state Linux ON100_6400F120FFB6 2.6.31.8PATCH-29 #1 Wed Jun 1 16:56:06 CDT 2011 eth0: link down eth0: started eth0: link up, full duplex, speed 1 Gbps eth1: started initFinish.sh: Starting HTTPD - Status info now available UBI: attaching mtd6 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd6 to ubi0 UBI: MTD device name: "datafs" UBI: MTD device size: 470 MiB UBI: number of good PEBs: 3755 UBI: number of bad PEBs: 5 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 3755 UBI: number of PEBs reserved for bad PEB handling: 37 UBI: max/mean erase counter: 19/16 UBI: image sequence number: 891834923 UBI: background thread "ubi_bgt0d" started, PID 749 UBI device number 0, total 3755 LEBs (484485120 bytes, 462.0 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB) initFinish.sh: ubiattach was successful to ubi0 initFinish.sh: mknod was successful for /dev/ubi0 initFinish.sh: Starting mount of internal flash .... ubi0 onto /mnt/INTFLASH UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "datafs" UBIFS: file system size: 477388800 bytes (466200 KiB, 455 MiB, 3700 LEBs) UBIFS: journal size: 23869440 bytes (23310 KiB, 22 MiB, 185 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4952683 bytes (4836 KiB) initFinish.sh: .... successfully completed mount Set LED STATE to: netconf_active killall: udhcpc: no process killed info, udhcpc (v0.9.9-pre) started debug, Sending discover... debug, Sending select for 192.168.178.110... info, Lease of 192.168.178.110 obtained, lease time 86400 udhcpc.sh: update default gw udhcpc.sh: deleting routes udhcpc.sh: Router is 192.168.178.1 eth0 udhcpc.sh: skip update dns Set LED STATE to: net_complete initFinish.sh: Attempting to mount /dev/sda1 flash device mount: Mounting /dev/sda1 on /mnt/EXTFLASH failed: No such device or address mount: Mounting /dev/sda1 on /mnt/EXTFLASH failed: No such device or address net.ipv4.neigh.eth0.gc_stale_time = 360 net.ipv4.neigh.default.gc_stale_time = 360 net.ipv4.conf.all.arp_filter = 1 vm.swappiness = 0 initFinish.sh: No CRAMFS file, we have run out of options .... failsafe time Set LED STATE to: netconf_active info, udhcpc (v0.9.9-pre) started debug, Sending discover... debug, Sending select for 192.168.178.110... info, Lease of 192.168.178.110 obtained, lease time 86400 udhcpc.sh: update default gw udhcpc.sh: deleting routes udhcpc.sh: Router is 192.168.178.1 eth0 udhcpc.sh: skip update dns Set LED STATE to: net_complete Set LED STATE to: failsafe ap_failSafeUpdate: Beginning fail safe recovery ap_failSafeUpdate: Cleaning up left-over rogue processes ... should already have stopped UBIFS: un-mount UBI device 0, volume 0 ap_failSafeUpdate: Beginning reformat of internal flash .... ubi0 Volumes count: 1 Logical eraseblockUBI: mtd6 is detached from ubi0 size: 129024 bytes, 126.0 KiB Total amount of logical eraseblocks: 3755 (484485120 bytes, 462.0 MiB) Amount of available logical eraseblocks: 0 (0 bytes) Maximum count of volumes 128 Count of bad physical eraseblocks: 5 Count of reserved physical eraseblocks: 37 Current maximum erase counter value: 19 Minimum input/output unit size: 2048 bytes Character device major/minor: 252:0 Present volumes: 0 ap_formatInternalFlash-ON100: Detached the UBI volume from mtd6 ubiformat: mtd6 (nand), size 492830720 bytes (470.0 MiB), 3760 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes libscan: scanning eraseblock 3759 -- 100 % complete ubiformat: 3755 eraseblocks have valid erase counter, mean value is 16 ubiformat: 5 bad eraseblocks found, numbers: 1215, 1655, 2283, 2598, 3149 ubifUBI: attaching mtd6 to ubi0k 3749 -- 99 % complete ormat: formattinUBI: physical eraseblock size: 131072 bytes (128 KiB) g eraseblock 375UBI: logical eraseblock size: 129024 bytes 0 -- 99 % compleUBI: smallest flash I/O unit: 2048 ubiformat: UBI: sub-page size: 512 formatting eraseUBI: VID header offset: 512 (aligned 512) block 3751 -- 99UBI: data offset: 2048 ubiformat: formatting eraseblock 3759 -- 100 % complete ap_formatInternalFlash-ON100: UBI Format completed UBI: attached mtd6 to ubi0 UBI: MTD device name: "datafs" UBI: MTD device size: 470 MiB UBI: number of good PEBs: 3755 UBI: number of bad PEBs: 5 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 3714 UBI: total number of reserved PEBs: 41 UBI: number of PEBs reserved for bad PEB handling: 37 UBI: max/mean erase counter: 20/17 UBI: image sequence number: 499669150 UBI: background thread "ubi_bgt0d" started, PID 1271 UBI device number 0, total 3755 LEBs (484485120 bytes, 462.0 MiB), available 3714 LEBs (479195136 bytes, 457.0 MiB), LEB size 129024 bytes (126.0 KiB) ap_formatInternalFlash-ON100: ubiattach was successful to ubi0 ap_formatInternalFlash-ON100: mknod was successful for /dev/ubi0 Set volume size to 479195136 Volume ID 0, size 3714 LEBs (479195136 bytes, 457.0 MiB), LEB size 129024 bytes (126.0 KiB), dynamic, name "datafs", alignment 1 ap_formatInternalFlash-ON100: ubimkvol was successful for /dev/ubi0 UBIFS: default file-system created UBIFS: mounted UBI device 0, volume 0, name "datafs" UBIFS: file system size: 477388800 bytes (466200 KiB, 455 MiB, 3700 LEBs) UBIFS: journal size: 23869440 bytes (23310 KiB, 22 MiB, 185 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4952683 bytes (4836 KiB) ap_failSafeUpdate: .... Format Completed ap_failSafeUpdate: Attempt #1 to retrieve http://failsafe.imageboot.com/failsafe/failsafe.html?model=ON100&mac=64:00:F1:20:FF:B6&serial=DNI15440BHM&pid=ON100-K9&vid=01 ap_failSafeUpdate: Bundle download was successful - in terms of a successful transfer ... ap_failSafeUpdate: Downloaded the bundle fine, but the tar file is corrupt ap_failSafeUpdate: Failed attempt 1 to download the recovery file! ap_failSafeUpdate: Attempt #2 to retrieve http://failsafe.imageboot.com/failsafe/failsafe.html?model=ON100&mac=64:00:F1:20:FF:B6&serial=DNI15440BHM&pid=ON100-K9&vid=01 ap_failSafeUpdate: Bundle download was successful - in terms of a successful transfer ... ap_failSafeUpdate: Downloaded the bundle fine, but the tar file is corrupt ap_failSafeUpdate: Failed attempt 2 to download the recovery file!
DUUUDES August 12, 2016 11:13PM |
Registered: 9 years ago Posts: 1,516 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: DB-88F6282A-BP LE U-Boot 1.1.4 (Feb 22 2011 - 14:06:09) Marvell version: 3.5.9 - Cisco Plasma U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006D2340 Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM (DDR3) CAS Latency = 6 tRP = 6 tRAS = 15 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled Module 0 is RGMII USB 0: host mode PEX 0: interface detected no Link. PEX 1: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 Plasma>> yreretureetllkrkletjkrle Unknown command 'yreretureetllkrkletjkrle' - try 'help' Plasma>>
Re: Debian on CISCO ON100-K9 August 12, 2016 11:35PM |
Registered: 9 years ago Posts: 1,516 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: DB-88F6282A-BP LE U-Boot 1.1.4 (Feb 22 2011 - 14:06:09) Marvell version: 3.5.9 - Cisco Plasma U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006D2340 Soc: 88F6282 A1CPU running @ 1600Mhz L2 running @ 533Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM (DDR3) CAS Latency = 6 tRP = 6 tRAS = 15 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB Flash: 0 kB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled Module 0 is RGMII USB 0: host mode PEX 0: interface detected no Link. PEX 1: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 ### JFFS2 loading 'boot.img' to 0x400000 Scanning JFFS2 FS: . done. ### JFFS2 load complete: 382 bytes loaded to 0x400000 ## Executing script at 00400000 "PLASMA Booting FIRST partition @ 0x400000" NAND read: device 0 offset 0x400000, size 0x600000 Reading data from 0x9ff800 -- 100% complete. 6291456 bytes read: OK ## Booting image at 00800000 ... Image Name: Linux-2.6.31.8PATCH-29 Created: 2011-06-01 21:56:16 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2323016 Bytes = 2.2 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux..................................................................................................................................................... done, booting the kernel. Linux version 2.6.31.8PATCH-29 (jamwyatt@aesop) (gcc version 4.3.2 (sdk3.2rc1-ct-ng-1.4.1) ) #1 Wed Jun 1 16:56:06 CDT 2011 CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 CPU: VIVT data cache, VIVT instruction cache Machine: Feroceon-KW Using UBoot passing parameters structure Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048 Kernel command line: console=ttyS0,115200 max_loop=64 mtdparts=nand_mtd:2m(uBoot)ro,2m(dualboot),6m(kernel1),8m(rootfs1),6m(kernel2),8m(rootfs2),470m(datafs),-(misc) root=/dev/mtdblock3 ro serialNo=DNI15440BHM hwVer=ON100-K9_V01 ip=::::DB88FXX81:eth0:none rootfstype=jffs2 PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 256MB 256MB = 512MB total Memory: 510592KB available (4348K code, 315K data, 124K init, 0K highmem) Hierarchical RCU implementation. NR_IRQS:128 Console: colour dummy device 80x30 Calibrating delay loop... 1599.07 BogoMIPS (lpj=7995392) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Feroceon L2: Enabling L2 Feroceon L2: Cache support initialised. CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 256MB SDRAM_CS1 ....base 10000000, size 256MB SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PEX1_MEM ....base e8000000, size 128MB PEX1_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB NFLASH_CS ....base fa000000, size 2MB SPI_CS ....base f4000000, size 16MB BOOT_ROM_CS ....no such DEV_BOOTCS ....no such CRYPT_ENG ....base f0000000, size 2MB Marvell Development Board (LSP Version KW_LSP_5.1.3_patch29)-- DB-88F6282A-BP Soc: 88F6282 A1 LE Detected Tclk 200000000 and SysClk 400000000 MV Buttons Device Load btns_init_data - plasma btns_init_data - Number of configured buttons: 1 Marvell USB EHCI Host controller #0: d0054740 PEX0 interface detected no Link. PEX1 interface detected no Link. PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 rtc mv_rtc: rtc core: registered kw-rtc as rtc0 RTC registered cpufreq: Init kirkwood cpufreq driver Kirkwood hwmon thermal sensor initialized. XOR registered 4 channels XOR 2nd invalidate WA enabled cesadev_init(c000c990) mvCesaInit: sessions=640, queue=64, pSram=f0000000 Warning: TS unit is powered off. MV Buttons Driver Load JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 997 alg: No test for cipher_null (cipher_null-generic) alg: No test for ecb(cipher_null) (ecb-cipher_null) alg: No test for digest_null (digest_null-generic) alg: No test for compress_null (compress_null-generic) alg: No test for stdrng (krng) alg: No test for hmac(digest_null) (hmac(digest_null-generic)) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered (default) Initializing ths8200_init Initializing dove_adi9889_init Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A console [ttyS0] enabled loop: module loaded Integrated Sata device found IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Loading Marvell Ethernet Driver: o Cached descriptors in DRAM o DRAM SW cache-coherency o 2 Giga ports supported o Single RX Queue support - ETH_DEF_RXQ=0 o Single TX Queue support - ETH_DEF_TXQ=0 o TCP segmentation offload (TSO) supported o Large Receive offload (LRO) supported o Receive checksum offload supported o Transmit checksum offload supported o Network Fast Processing (Routing) supported - (Disabled) o Driver ERROR statistics enabled o Proc tool API enabled o SKB Reuse supported - (Disabled) o SKB Recycle supported - (Disabled) o Rx descripors: q0=128 o Tx descripors: q0=532 o Loading network interface(s): o register under mv88fx_eth platform o eth0, ifindex = 2, GbE port = 0 o eth1, ifindex = 3, GbE port = 1 mvFpRuleDb (d07f0000): 16384 entries, 65536 bytes Counter=0, opIdx=6, overhead=16 Counter=1, opIdx=2, overhead=0 Counter=2, opIdx=1, overhead=18 Counter=3, opIdx=2, overhead=0 Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus NAND device: Manufacturer ID: 0xad, Chip ID: 0xdc (Hynix NAND 512MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 1471 at 0x00000b7e0000 Bad eraseblock 1911 at 0x00000eee0000 Bad eraseblock 2539 at 0x000013d60000 Bad eraseblock 2854 at 0x0000164c0000 Bad eraseblock 3405 at 0x00001a9a0000 8 cmdlinepart partitions found on MTD device nand_mtd Using command line partition definition Creating 8 MTD partitions on "nand_mtd": 0x000000000000-0x000000200000 : "uBoot" 0x000000200000-0x000000400000 : "dualboot" 0x000000400000-0x000000a00000 : "kernel1" 0x000000a00000-0x000001200000 : "rootfs1" 0x000001200000-0x000001800000 : "kernel2" 0x000001800000-0x000002000000 : "rootfs2" 0x000002000000-0x00001f600000 : "datafs" 0x00001f600000-0x000020000000 : "misc" ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_marvell ehci_marvell.70059: Marvell Orion EHCI ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1 ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100 ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat mice: PS/2 mouse device common for all mice i2c /dev entries driver Orion Watchdog Timer: Initial timeout 21 sec sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman mmc0: mvsdio driver initialized, lacking card detect (fall back to polling) Registered led device: plasma:green:s1 Registered led device: plasma:red:s1 Registered led device: plasma:green:s2 Registered led device: plasma:red:s2 GRE over IPv4 tunneling driver TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> rtc mv_rtc: setting system clock to 2016-08-13 12:49:28 UTC (1471092568) CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00020000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00040000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00060000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00080000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x000e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00100000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00120000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00140000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00160000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00180000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x001e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00200000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00220000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00240000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00260000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00280000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x002e0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00300000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00320000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00340000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00360000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x00380000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003a0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003c0000 has totlen 0xc != normal 0x0 CLEANMARKER node found at 0x003e0000 has totlen 0xc != normal 0x0 VFS: Mounted root (jffs2 filesystem) readonly on device 31:3. Freeing init memory: 124K Creating R/W root Start up on R/W root Root Filesystem Version: 18.45 Set LED STATE to: init_state Linux ON100_6400F120FFB6 2.6.31.8PATCH-29 #1 Wed Jun 1 16:56:06 CDT 2011 eth0: link down eth0: started eth0: link up, full duplex, speed 1 Gbps eth1: started initFinish.sh: Starting HTTPD - Status info now available UBI: attaching mtd6 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd6 to ubi0 UBI: MTD device name: "datafs" UBI: MTD device size: 470 MiB UBI: number of good PEBs: 3755 UBI: number of bad PEBs: 5 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 0 UBI: total number of reserved PEBs: 3755 UBI: number of PEBs reserved for bad PEB handling: 37 UBI: max/mean erase counter: 20/17 UBI: image sequence number: 499669150 UBI: background thread "ubi_bgt0d" started, PID 749 UBI device number 0, total 3755 LEBs (484485120 bytes, 462.0 MiB), available 0 LEBs (0 bytes), LEB size 129024 bytes (126.0 KiB) initFinish.sh: ubiattach was successful to ubi0 initFinish.sh: mknod was successful for /dev/ubi0 initFinish.sh: Starting mount of internal flash .... ubi0 onto /mnt/INTFLASH UBIFS: mounted UBI device 0, volume 0, name "datafs" UBIFS: file system size: 477388800 bytes (466200 KiB, 455 MiB, 3700 LEBs) UBIFS: journal size: 23869440 bytes (23310 KiB, 22 MiB, 185 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4952683 bytes (4836 KiB) initFinish.sh: .... successfully completed mount Set LED STATE to: netconf_active killall: udhcpc: no process killed info, udhcpc (v0.9.9-pre) started debug, Sending discover... debug, Sending select for 192.168.178.110... info, Lease of 192.168.178.110 obtained, lease time 86400 udhcpc.sh: update default gw udhcpc.sh: deleting routes udhcpc.sh: Router is 192.168.178.1 eth0 udhcpc.sh: skip update dns Set LED STATE to: net_complete initFinish.sh: Attempting to mount /dev/sda1 flash device mount: Mounting /dev/sda1 on /mnt/EXTFLASH failed: No such device or address mount: Mounting /dev/sda1 on /mnt/EXTFLASH failed: No such device or address net.ipv4.neigh.eth0.gc_stale_time = 360 net.ipv4.neigh.default.gc_stale_time = 360 net.ipv4.conf.all.arp_filter = 1 vm.swappiness = 0 initFinish.sh: No CRAMFS file, we have run out of options .... failsafe time Set LED STATE to: netconf_active info, udhcpc (v0.9.9-pre) started debug, Sending discover... debug, Sending select for 192.168.178.110... info, Lease of 192.168.178.110 obtained, lease time 86400 udhcpc.sh: update default gw udhcpc.sh: deleting routes udhcpc.sh: Router is 192.168.178.1 eth0 udhcpc.sh: skip update dns Set LED STATE to: net_complete Set LED STATE to: failsafe ap_failSafeUpdate: Beginning fail safe recovery ap_failSafeUpdate: Cleaning up left-over rogue processes ... should already have stopped UBIFS: un-mount UBI device 0, volume 0 ap_failSafeUpdate: Beginning reformat of internal flash .... ubi0 Volumes count: 1 Logical eraseblockUBI: mtd6 is detached from ubi0 size: 129024 bytes, 126.0 KiB Total amount of logical eraseblocks: 3755 (484485120 bytes, 462.0 MiB) Amount of available logical eraseblocks: 0 (0 bytes) Maximum count of volumes 128 Count of bad physical eraseblocks: 5 Count of reserved physical eraseblocks: 37 Current maximum erase counter value: 20 Minimum input/output unit size: 2048 bytes Character device major/minor: 252:0 Present volumes: 0 ap_formatInternalFlash-ON100: Detached the UBI volume from mtd6 ubiformat: mtd6 (nand), size 492830720 bytes (470.0 MiB), 3760 eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes libscan: scanning eraseblock 3759 -- 100 % complete ubiformat: 3755 eraseblocks have valid erase counter, mean value is 17 ubiformat: 5 bad eraseblocks found, numbers: 1215, 1655, 2283, 2598, 3149 ubifUBI: attaching mtd6 to ubi0k 3749 -- 99 % complete ormat: formattinUBI: physical eraseblock size: 131072 bytes (128 KiB) g eraseblock 375UBI: logical eraseblock size: 129024 bytes 0 -- 99 % compleUBI: smallest flash I/O unit: 2048 ubiformat: UBI: sub-page size: 512 formatting eraseUBI: VID header offset: 512 (aligned 512) block 3751 -- 99UBI: data offset: 2048 ubiformat: formatting eraseblock 3759 -- 100 % complete ap_formatInternalFlash-ON100: UBI Format completed UBI: attached mtd6 to ubi0 UBI: MTD device name: "datafs" UBI: MTD device size: 470 MiB UBI: number of good PEBs: 3755 UBI: number of bad PEBs: 5 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 0 UBI: available PEBs: 3714 UBI: total number of reserved PEBs: 41 UBI: number of PEBs reserved for bad PEB handling: 37 UBI: max/mean erase counter: 21/18 UBI: image sequence number: 1644597623 UBI: background thread "ubi_bgt0d" started, PID 1274 UBI device number 0, total 3755 LEBs (484485120 bytes, 462.0 MiB), available 3714 LEBs (479195136 bytes, 457.0 MiB), LEB size 129024 bytes (126.0 KiB) ap_formatInternalFlash-ON100: ubiattach was successful to ubi0 ap_formatInternalFlash-ON100: mknod was successful for /dev/ubi0 Set volume size to 479195136 Volume ID 0, size 3714 LEBs (479195136 bytes, 457.0 MiB), LEB size 129024 bytes (126.0 KiB), dynamic, name "datafs", alignment 1 ap_formatInternalFlash-ON100: ubimkvol was successful for /dev/ubi0 UBIFS: default file-system created UBIFS: mounted UBI device 0, volume 0, name "datafs" UBIFS: file system size: 477388800 bytes (466200 KiB, 455 MiB, 3700 LEBs) UBIFS: journal size: 23869440 bytes (23310 KiB, 22 MiB, 185 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 4952683 bytes (4836 KiB) ap_failSafeUpdate: .... Format Completed ap_failSafeUpdate: Attempt #1 to retrieve http://failsafe.imageboot.com/failsafe/failsafe.html?model=ON100&mac=64:00:F1:20:FF:B6&serial=DNI15440BHM&pid=ON100-K9&vid=01
Re: Debian on CISCO ON100-K9 August 13, 2016 12:25AM |
Registered: 9 years ago Posts: 1,516 |
Re: Debian on CISCO ON100-K9 August 13, 2016 01:14AM |
Registered: 9 years ago Posts: 454 |
Re: Debian on CISCO ON100-K9 August 13, 2016 02:10AM |
Admin Registered: 13 years ago Posts: 18,858 |
Quote
Joey
-4th edit-
I connected it to router with Internet unplugged, got address reservation with router's DHCP. I couldn't quite get MON to show itself but I almost swear I saw it in DHCP list and I couldn't reserve it in time. I don't know about Bonjour but neither Win7 nor OSX snow Leopard can see it on the network, so far.
The lights look healthy, they sequence through stages and ends-up left amber solid and right amber blinking. But I lack a stable way to hold the pins in place, and get pins then, and for sure know what holes, and orientation. Hindsight is 2nd nature but this ain't hindsight.
Re: Debian on CISCO ON100-K9 August 13, 2016 08:59AM |
Registered: 10 years ago Posts: 1,037 |
Re: Debian on CISCO ON100-K9 August 13, 2016 05:22PM |
Admin Registered: 13 years ago Posts: 18,858 |