MIko
Pogo V4 netconsle October 26, 2016 06:52AM |
nc -l -u -p 6666connection is established (netstat), but in terminal where nc is running nothing happens.
Re: Pogo V4 netconsle October 26, 2016 03:25PM |
Admin Registered: 13 years ago Posts: 18,575 |
Quote
10. Set up netconsole. It's important to set up neconsole if you don't already have serial console connected. If you've flashed the default environments in step 8 then activate netconsole with the following envs:
fw_setenv preboot_nc 'setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi'
fw_setenv preboot 'run preboot_nc'
fw_setenv ipaddr '192.168.0.xxx'
fw_setenv serverip '192.168.0.yyy'
where the 192.168.0.xxx is this plug IP address, and 192.168.0.yyy is the IP address of the netconsole server where it will monitor the output from the this plug (adjust them to the real values in your own local network settings).
Mlko
Re: Pogo V4 netconsle October 27, 2016 04:02AM |
Re: Pogo V4 netconsle October 27, 2016 03:32PM |
Admin Registered: 13 years ago Posts: 18,575 |
nc -lup 6666 192.168.0.xxx 6666
MIko
Re: Pogo V4 netconsle October 28, 2016 04:15AM |
cp -a uboot.2016.05-tld-1.environment /boot/uEnv.txtand changed arcNumber to 3960 and machid to F78 and dtb_file= to /boot/dts/kirkwood-pogoplug_v4.dtb
Re: Pogo V4 netconsle October 28, 2016 02:15PM |
Admin Registered: 13 years ago Posts: 18,575 |
cp -a > uboot.2016.05-tld-1.environment > /boot/uEnv.txt> and changed arcNumber to 3960 and machid to F78