Hi,
My dogstar refuses to boot Debian lenny

This is my netconsole :

U-Boot 2010.06-00695-gbd23130-dirty (Aug 25 2010 - 01:20:45)
Marvell-Dockstar/Pogoplug by Jeff Doozan
Hit any key to stop autoboot: 10  9  8  7  6  5  4  3  2  1  0 
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
 ** ext2fs_devread() read outside partition sector 3145744
** File not found /boot/uImage
Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
 ** ext2fs_devread() read outside partition sector 3145744
** File not found /boot/uInitrd
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..
### JFFS2 loading 'uboot-original-mtd0.kwb' to 0x800000
Scanning JFFS2 FS:   .  .  .  .  .  .  .  .   done.
### JFFS2 load complete: 524288 bytes loaded to 0x800000
## Starting application at 0x00800200 ...

and here the fdisk :

Pogoplug:/$ busybox fdisk /dev/sda -l

Disk /dev/sda: 8220 MB, 8220835840 bytes
255 heads, 63 sectors/track, 999 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sda1   *           1         125     1004031  83 Linux
/dev/sda2             126         188      506047+ 82 Linux swap

When i mount the sda1 partition, i have the folowing errors with the 'ls' command

Pogoplug:/tmp$ mkdir debian
Pogoplug:/tmp$ mount /dev/sda1 debian
Pogoplug:/tmp$ cd debian; ls
ls: ./boot: Input/output error
ls: ./sbin: Input/output error
ls: ./opt: Input/output error
ls: ./etc: Input/output error
ls: ./dev: Input/output error
ls: ./root: Input/output error
ls: ./lib: Input/output error
ls: ./mnt: Input/output error
ls: ./selinux: Input/output error
ls: ./var: Input/output error
ls: ./bin: Input/output error
ls: ./home: Input/output error
ls: ./srv: Input/output error
ls: ./media: Input/output error
ls: ./proc: Input/output error
ls: ./usr: Input/output error
ls: ./tmp: Input/output error
base.tar.bz2                  sheeva-2.6.33-uImage
lost+found                    sys
sheeva-2.6.33-Modules.tar.gz

Pogoplug:/tmp$ mount | grep sda1
/dev/sda1 on /tmp/debian type ext2 (rw)

If you have an idea, i used 'busybox fdisk' to create my partitions.

USB Flash drive : OCZ Rally2 Turbo 8GB USB 2.0

-------------------------------

Solved :

- Repartitionning (512M & 256M)
- Install Debian squeeze

Edited 4 time(s). Last edit at 08/26/2010 06:30AM by AciDation.