Hi all,
need help to come into the system. Please Help.
I installed U-Boot 2010.09 with the Script for debian squeeze.
Everyhting worked.
So I manged to install the nc in U-Boot and i do have the possibility to connect from my laptop.
But then the USB Stick crashed.
Now even booting into Pogoplug in not possible.
Are there some binaries to re install the pogoplug or the new rescue system directly.
So if could say: run pogo_bootcmd
here is my printenv output: ( thanks in advanced )
--------------------------------------------------------------
Marvell>> printenv
printenv
ethact=egiga0
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
rescue_installed=0
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootfstype=ext2
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
ethaddr=00:10:75:1A:1F:77
arcNumber=2097
ipaddr=192.168.2.126
if_netconsole=ping $serverip
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
preboot=run if_netconsole start_netconsole
serverip=192.168.2.100
usb_bootcmd=usb start
bootcmd_usb=usb start; ext2load usb 0:1 0x00800000 /boot/uImage; ext2load usb 0:1 0x01100000 /boot/uInitrd
bootcmd=setenv bootargs $(bootargs_console) $(bootargs_root); run bootcmd_usb; bootm 0x00800000 0x01100000
bootargs_root=root=/dev/sda2 rootdelay=10 debug
ncip=192.168.2.100
bootdelay=10
stdin=nc
stdout=nc
stderr=nc
partition=nand0,2
mtddevnum=2
mtddevname=rootfs
filesize=80000
bootargs=console=ttyS0,115200 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
Environment size: 2828/131068 bytes
Marvell>>