Welcome! Log In Create A New Profile

Advanced

News intall Debian USB

Posted by DJDavid 
News intall Debian USB
February 16, 2011 06:54AM
Hello I changed USB drives for greater capacity I think I've successfully created the partion to install debian
Can you confirm ?
Device Boot Start End Blocks Id System
/dev/sda1 1 400 409584 83 Linux
/dev/sda2 401 15296 15253504 82 Linux swap
because I can not install debian
this is what I
Pogoplug: ~ $ cd / tmp
Pogoplug: / tmp $ wget http://jeff.doozan.com/debian/dockstar.debian-squeeze.sh
Connecting to jeff.doozan.com (69.163.187.226:80)
dockstar.debian sk-100% 10602 --:--:-- ETA |*******************************|
Pogoplug: / tmp $ chmod + x-dockstar.debian squeeze.sh
Pogoplug: / tmp $ export PATH = $ PATH: / usr / sbin: / sbin
Pogoplug: / tmp $ export PATH = $ PATH: / usr / sbin: / sbin
Pogoplug: / tmp $. / dockstar.debian-squeeze.sh
touch: / sbin/16022011125212: Read-only file system


!!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!!

Will this script replaces The bootloader on / dev/mtd0.

If you lose power while The bootloader IS Being flashed,
your device Could Be Left in year unusable state.


Will this script to configure your boot Debian Dockstar Squeeze
from a USB device. Before running this script, you Should Have
Used fdisk to create partitions THE FOLLOWING:

/ dev/sda1 (Linux ext2, at least 400MB)
/ dev/sda2 (Linux swap, 256MB recommended)


This Script Will Destroy ALL EXISTING DATA ON / dev/sda1
Please double check thats the device on / dev/sda1 Is the correct device.

By typing ok, you AGREE to assume all Liabilities and Risks
Associated with running this install.

Everything looks good if type 'ok'to continue: OK
I hit ok
Exiting ...
Pogoplug: / tmp $
Re: News intall Debian USB
February 16, 2011 08:03AM
You're going to want to partition the drive again.
/dev/sda1 larger
/dev/sda2 smaller

Did you really type OK in capitals? if so then exiting would be expected.

HTH, Jim
Re: News intall Debian USB
February 16, 2011 10:05AM
ok thank you
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: