nrq
install fails on mount May 09, 2011 02:07PM |
Pogoplug:/tmp$ ./dockstar.debian-squeeze.sh !!!!!! DANGER DANGER DANGER DANGER DANGER DANGER !!!!!! This script will replace the bootloader on /dev/mtd0. If you lose power while the bootloader is being flashed, your device could be left in an unusable state. This script will configure your Dockstar to boot Debian Squeeze from a USB device. Before running this script, you should have used fdisk to create the following partitions: /dev/sda1 (Linux ext2, at least 400MB) /dev/sda2 (Linux swap, recommended 256MB) This script will DESTROY ALL EXISTING DATA on /dev/sda1 Please double check that the device on /dev/sda1 is the correct device. By typing ok, you agree to assume all liabilities and risks associated with running this installer. If everything looks good, type 'ok' to continue: ok Installing Bootloader # checking for /usr/sbin/nandwrite... # checking for /usr/sbin/nanddump... # checking for /usr/sbin/flash_erase... # checking for /usr/sbin/fw_printenv... # checking for /etc/fw_env.config... # Validating existing uBoot... Block size 131072, page size 2048, OOB size 64 Dumping data starting at 0x00000000 and ending at 0x00080000... Connecting to jeff.doozan.com (69.163.187.226:80) valid-uboot.md5 100% |********************************************************| 756 --:--:-- ETA ## Valid uBoot detected: [pinkpogo jeff-2010-10-23-current] ## The newest uBoot is already installed on mtd0. # uBoot installation has completed successfully. mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 238080 inodes, 952296 blocks 47614 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=977272832 30 block groups 32768 blocks per group, 32768 fragments per group 7936 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 33 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. Setting up swapspace version 1, size = 324356096 bytes mount: mounting /dev/sda1 on /tmp/debian failed: Invalid argument Could not mount /dev/sda1 on /tmp/debian Pogoplug:/tmp$
nrq
Re: install fails on mount May 09, 2011 02:14PM |
Re: install fails on mount May 09, 2011 08:01PM |
Registered: 13 years ago Posts: 28 |
nrq
Re: install fails on mount May 10, 2011 03:59PM |
Pogoplug:/tmp$ dmesg |tail [ 139.300000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 [ 139.310000] sd 0:0:0:0: [sda] Sense Key : 0x7 [current] [ 139.310000] Info fld=0x0 [ 139.320000] sd 0:0:0:0: [sda] ASC=0x27 ASCQ=0x0 [ 139.320000] end_request: I/O error, dev sda, sector 64 [ 139.420000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 [ 139.420000] sd 0:0:0:0: [sda] Sense Key : 0x7 [current] [ 139.430000] Info fld=0x0 [ 139.430000] sd 0:0:0:0: [sda] ASC=0x27 ASCQ=0x0 [ 139.440000] end_request: I/O error, dev sda, sector 7618436dmesg is filled with errors for different sectors like that. Possibly a bad USB stick?
nrq
Re: install fails on mount May 11, 2011 03:54PM |