Welcome! Log In Create A New Profile

Advanced

usb seagate hdd 1To : bad boot

Posted by acognard 
Forum List Message List New Topic
acognard
usb seagate hdd 1To : bad boot
May 16, 2011 06:31AM
Hi all,
i am facing a new issue while using boot from usb hdd seagate. 

    U-Boot 2010.09 (Oct 23 2010 - 11:49:22)
    Marvell-Dockstar/Pogoplug by Jeff Doozan
    Hit any key to stop autoboot:  0
    (Re)start USB...
    USB:   Register 10011 NbrPorts 1
    USB EHCI 1.00
    scanning bus for devices... 4 USB Device(s) found
           scanning bus for storage devices... 1 Storage Device(s) found
    Loading file "/rescueme" from usb device 0:1 (usbda1)
    ** File not found /rescueme
    reading /rescueme.txt
    ** Unable to read "/rescueme.txt" from usb 0:1 **
    Creating 1 MTD partitions on "nand0":
    0x000002500000-0x000010000000 : "mtd=3"
    UBI: attaching mtd1 to ubi0
    UBI: physical eraseblock size:   131072 bytes (128 KiB)
    UBI: logical eraseblock size:    129024 bytes
    UBI: smallest flash I/O unit:    2048
    UBI: sub-page size:              512
    UBI: VID header offset:          512 (aligned 512)
    UBI: data offset:                2048
    UBI: attached mtd1 to ubi0
    UBI: MTD device name:            "mtd=3"
    UBI: MTD device size:            219 MiB
    UBI: number of good PEBs:        1751
    UBI: number of bad PEBs:         1
    UBI: max. allowed volumes:       128
    UBI: wear-leveling threshold:    4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes:     0
    UBI: available PEBs:             1730
    UBI: total number of reserved PEBs: 21
    UBI: number of PEBs reserved for bad PEB handling: 17
    UBI: max/mean erase counter: 1/1
    UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
    Error reading superblock on volume 'ubi:rootfs'!
    Loading file "/boot/uImage" from usb device 0:1 (usbda1)
    1 bytes read
    Found bootable drive on usb 0:1
    Loading file "/boot/uImage" from usb device 0:1 (usbda1)
    1438876 bytes read
    Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
    4749194 bytes read
    ## Booting kernel from Legacy Image at 00800000 ...
       Image Name:   Linux-2.6.32-5
       Image Type:   ARM Linux Kernel Image (uncompressed)
       Data Size:    1438812 Bytes = 1.4 MiB
       Load Address: 00008000
       Entry Point:  00008000
       Verifying Checksum ... OK
    ## Loading init Ramdisk from Legacy Image at 01100000 ...
       Image Name:   initramfs
       Image Type:   ARM Linux RAMDisk Image (gzip compressed)
       Data Size:    4749130 Bytes = 4.5 MiB
       Load Address: 00000000
       Entry Point:  00000000
       Verifying Checksum ... OK
       Loading Kernel Image ... OK
    OK
    Starting kernel ...

Can someone here help me ?

fsck is ok, bu LED is fixed & orange. No ping.
Tks in advance
Arnaud
Reply Quote
acognard
Re: usb seagate hdd 1To : bad boot
May 22, 2011 08:15AM
1 up...
i am still without having any success using my hdd... any help ? any idea ?
Many tks.
Arnaud



Edited 1 time(s). Last edit at 05/24/2011 01:38PM by acognard.
Reply Quote
Newer Topic Older Topic
Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: