Re: Debian on Dell Kace M300 March 21, 2022 02:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 March 22, 2022 05:57PM |
Admin Registered: 13 years ago Posts: 18,821 |
uboot.2022.04-tld-1.m300.mtd0.kwb uboot.2022.04-tld-1.m300.environment.4K.img uboot.2022.04-tld-1.m300.environment (this is the default envs in text format)
protect off allExpected output
Un-Protect Flash Bank # 1 ................................................................................................................................ done
boot
flash_unlock /dev/mtd0 flashcp -v uboot.2022.04-tld-1.m300.mtd0.kwb /dev/mtd0Expected output
Erasing blocks: 96/96 (100%) Writing data: 384k/384k (100%) Verifying data: 384k/384k (100%)
flash_unlock /dev/mtd1 flashcp -v uboot.2022.04-tld-1.m300.environment.4K.img /dev/mtd1Expected output
Erasing blocks: 1/1 (100%) Writing data: 4k/4k (100%) Verifying data: 4k/4k (100%)
cd /boot cp -a uImage uImage.m300.dtb cp -a uImage.orig uImage
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-5.16.5-kirkwood-tld-1 -d vmlinuz-5.16.5-kirkwood-tld-1 uImage
fw_setenv ethaddr 18:03:73:xx:xx:xx fw_setenv ipaddr 192.168.0.249 fw_setenv serverip 192.168.0.220
fw_printenv > /boot/uboot.2022.04-tld-1.env.list.txt
sync sync sync shutdown -r now
custom_params=raid=noautodetect bootdev=sata devices=sata usb
Re: Debian on Dell Kace M300 March 22, 2022 11:24PM |
Registered: 9 years ago Posts: 51 |
root@yamada:~# hdparm -Tt /dev/sda /dev/sda: Timing cached reads: 690 MB in 2.00 seconds = 344.42 MB/sec Timing buffered disk reads: 512 MB in 3.00 seconds = 170.40 MB/sec
root@yamada:~# dd if=/dev/zero of=/tmp/test1.img bs=512M count=1 oflag=dsync 1+0 records in 1+0 records out 536870912 bytes (537 MB, 512 MiB) copied, 4.04497 s, 133 MB/s
root@yamada:~# dd if=/dev/zero of=/tmp/test2.img bs=512 count=1000 oflag=dsync 1000+0 records in 1000+0 records out 512000 bytes (512 kB, 500 KiB) copied, 0.0122276 s, 41.9 MB/s
service ntp stop ntpdate time.nist.gov service ntp start
Re: Debian on Dell Kace M300 March 23, 2022 01:24AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 March 26, 2022 04:33PM |
Registered: 10 years ago Posts: 226 |
Re: Debian on Dell Kace M300 March 26, 2022 05:05PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 March 26, 2022 05:49PM |
Registered: 9 years ago Posts: 51 |
Mar 24 22:01:09 yamada kernel: ------------[ cut here ]------------ Mar 24 22:01:09 yamada kernel: WARNING: CPU: 0 PID: 34 at fs/dcache.c:443 dentry_lru_isolate+0x68/0x15c Mar 24 22:01:09 yamada kernel: Modules linked in: cpufreq_powersave cpufreq_ondemand cpufreq_userspace cpufreq_conservative sg marvell_cesa orion_wdt kirkwood_thermal uio_pdrv_genirq uio Mar 24 22:01:09 yamada kernel: CPU: 0 PID: 34 Comm: kswapd0 Not tainted 5.16.5-kirkwood-tld-1 #1.0 bb123a1a8bc192eaa137d740646f2cde096d6733 Mar 24 22:01:09 yamada kernel: Hardware name: Marvell Kirkwood (Flattened Device Tree) Mar 24 22:01:09 yamada kernel: [<8010e33c>] (unwind_backtrace) from [<8010a964>] (show_stack+0x10/0x14) Mar 24 22:01:09 yamada kernel: [<8010a964>] (show_stack) from [<8011dce4>] (__warn+0xbc/0xe8) Mar 24 22:01:09 yamada kernel: [<8011dce4>] (__warn) from [<80b4a03c>] (warn_slowpath_fmt+0x78/0xb0) Mar 24 22:01:09 yamada kernel: [<80b4a03c>] (warn_slowpath_fmt) from [<802a7fcc>] (dentry_lru_isolate+0x68/0x15c) Mar 24 22:01:09 yamada kernel: [<802a7fcc>] (dentry_lru_isolate) from [<80259c4c>] (__list_lru_walk_one.constprop.0+0x58/0xc4) Mar 24 22:01:09 yamada kernel: [<80259c4c>] (__list_lru_walk_one.constprop.0) from [<80259ce4>] (list_lru_walk_one+0x2c/0x68) Mar 24 22:01:09 yamada kernel: [<80259ce4>] (list_lru_walk_one) from [<802aa4e0>] (prune_dcache_sb+0x44/0x80) Mar 24 22:01:09 yamada kernel: [<802aa4e0>] (prune_dcache_sb) from [<80295684>] (super_cache_scan+0xe0/0x148) Mar 24 22:01:09 yamada kernel: [<80295684>] (super_cache_scan) from [<80241cc4>] (shrink_slab.part.0.constprop.0+0x254/0x398) Mar 24 22:01:09 yamada kernel: [<80241cc4>] (shrink_slab.part.0.constprop.0) from [<80244c7c>] (shrink_node+0x644/0x88c) Mar 24 22:01:09 yamada kernel: [<80244c7c>] (shrink_node) from [<802456a4>] (kswapd+0x4b8/0x748) Mar 24 22:01:09 yamada kernel: [<802456a4>] (kswapd) from [<8013c340>] (kthread+0x154/0x164) Mar 24 22:01:09 yamada kernel: [<8013c340>] (kthread) from [<80100128>] (ret_from_fork+0x14/0x2c) Mar 24 22:01:09 yamada kernel: Exception stack(0x818b3fb0 to 0x818b3ff8) Mar 24 22:01:09 yamada kernel: 3fa0: 00000000 00000000 00000000 00000000 Mar 24 22:01:09 yamada kernel: 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Mar 24 22:01:09 yamada kernel: 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Mar 24 22:01:09 yamada kernel: ---[ end trace 6b98251daf282d31 ]--- Mar 24 22:01:09 yamada kernel: 8<--- cut here --- Mar 24 22:01:09 yamada kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000003 Mar 24 22:01:09 yamada kernel: [00000003] *pgd=00000000 Mar 24 22:01:09 yamada kernel: Internal error: Oops: 801 [#1] PREEMPT ARM Mar 24 22:01:09 yamada kernel: Modules linked in: cpufreq_powersave cpufreq_ondemand cpufreq_userspace cpufreq_conservative sg marvell_cesa orion_wdt kirkwood_thermal uio_pdrv_genirq uio Mar 24 22:01:09 yamada kernel: CPU: 0 PID: 34 Comm: kswapd0 Tainted: G W 5.16.5-kirkwood-tld-1 #1.0 bb123a1a8bc192eaa137d740646f2cde096d6733 Mar 24 22:01:09 yamada kernel: Hardware name: Marvell Kirkwood (Flattened Device Tree) Mar 24 22:01:09 yamada kernel: PC is at ___d_drop+0x44/0x58 Mar 24 22:01:09 yamada kernel: LR is at read_seqlock_excl.constprop.0+0xc/0x10 Mar 24 22:01:09 yamada kernel: pc : [<802a8d60>] lr : [<802a8878>] psr: 20000013 Mar 24 22:01:10 yamada kernel: sp : 818b3d68 ip : 8353003c fp : 0000a6c0 Mar 24 22:01:10 yamada kernel: r10: 84065c00 r9 : 84065e70 r8 : 00000000 Mar 24 22:01:10 yamada kernel: r7 : 818b2000 r6 : 85ab84b8 r5 : ef16dab8 r4 : 85ab8450 Mar 24 22:01:10 yamada kernel: r3 : 1dc546f6 r2 : 00000003 r1 : 00000000 r0 : ef16dab8 Mar 24 22:01:10 yamada kernel: Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Mar 24 22:01:10 yamada kernel: Control: 0005397f Table: 0b120000 DAC: 00000053 Mar 24 22:01:10 yamada kernel: Register r0 information: non-slab/vmalloc memory Mar 24 22:01:10 yamada kernel: Register r1 information: NULL pointer Mar 24 22:01:10 yamada kernel: Register r2 information: non-paged memory Mar 24 22:01:10 yamada kernel: Register r3 information: non-paged memory Mar 24 22:01:10 yamada kernel: Register r4 information: slab dentry start 85ab8440 pointer offset 16 size 40 Mar 24 22:01:10 yamada kernel: Register r5 information: non-slab/vmalloc memory Mar 24 22:01:10 yamada kernel: Register r6 information: slab dentry start 85ab8440 pointer offset 120 size 40 Mar 24 22:01:10 yamada kernel: Register r7 information: non-slab/vmalloc memory Mar 24 22:01:10 yamada kernel: Register r8 information: NULL pointer Mar 24 22:01:10 yamada kernel: Register r9 information: slab kmalloc-1k start 84065c00 pointer offset 624 size 1024 Mar 24 22:01:10 yamada kernel: Register r10 information: slab kmalloc-1k start 84065c00 pointer offset 0 size 1024 Mar 24 22:01:10 yamada kernel: Register r11 information: non-paged memory Mar 24 22:01:10 yamada kernel: Register r12 information: non-slab/vmalloc memory Mar 24 22:01:10 yamada kernel: Process kswapd0 (pid: 34, stack limit = 0xee9d3cad) Mar 24 22:01:10 yamada kernel: Stack: (0x818b3d68 to 0x818b4000) Mar 24 22:01:10 yamada kernel: 3d60: 85ab8450 85ab846c 85ab84b8 802a8d8c 85ab8450 802a906c Mar 24 22:01:10 yamada kernel: 3d80: 818b3db4 85ab8450 85ab84b8 802aa150 818b3db4 000002de 000002de 00000000 Mar 24 22:01:10 yamada kernel: 3da0: 00000000 802aa4ec 818b3db4 818b3e40 00000001 85ab89f8 859049f8 81304228 Mar 24 22:01:10 yamada kernel: 3dc0: 00000400 818b3e38 00024c2e 80295684 84065e70 00000400 802955a4 00000469 Mar 24 22:01:10 yamada kernel: 3de0: 84065e70 00000000 818b2000 818b3e00 00000400 00000000 00000000 80241cc4 Mar 24 22:01:10 yamada kernel: 3e00: 818b3e8c 00000000 83f30780 80659648 00000001 818b3e14 00043ace 00000009 Mar 24 22:01:10 yamada kernel: 3e20: 0000024c 00000000 00000400 0004985a 00000cc0 00000000 00000cc0 00000000 Mar 24 22:01:10 yamada kernel: 3e40: 00000000 00000400 00000000 81304228 00000005 818b3f0c 8145c5a4 00000cc0 Mar 24 22:01:10 yamada kernel: 3e60: 8145ca98 00000000 818b3f50 00000009 00000004 80244c7c 00000000 000000d0 Mar 24 22:01:10 yamada kernel: 3e80: 000008b4 000039c4 81a8cfe0 00000000 00000000 00000001 81000000 818b3e9c Mar 24 22:01:10 yamada kernel: 3ea0: 818b3e9c 00000000 00000000 00000000 00000000 000008b4 00000003 00000000 Mar 24 22:01:10 yamada kernel: 3ec0: 000000ef 00000127 000008b4 81304228 00000000 8145c5a4 818b2000 00000001 Mar 24 22:01:10 yamada kernel: 3ee0: 00000000 00000000 8145c77c 81a8cfe0 00000000 802456a4 8145c5a4 00000001 Mar 24 22:01:10 yamada kernel: 3f00: 00000000 000000d0 8190e000 000008b4 00000000 00000000 00000aae 00000893 Mar 24 22:01:10 yamada kernel: 3f20: 09000072 00000001 00000cc0 000000f2 000001c0 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3f40: 00000000 00000000 000000ef 000000f2 00000000 00000000 00000000 81304228 Mar 24 22:01:10 yamada kernel: 3f60: 8190fe90 81ae2980 818b2000 81ac6bc0 802451ec 8145c5a4 8190fe90 00000000 Mar 24 22:01:10 yamada kernel: 3f80: 81ae299c 8013c340 00000000 81ac6bc0 8013c1ec 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3fa0: 00000000 00000000 00000000 80100128 00000000 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: [<802a8d60>] (___d_drop) from [<802a8d8c>] (__d_drop+0x18/0x30) Mar 24 22:01:10 yamada kernel: [<802a8d8c>] (__d_drop) from [<802a906c>] (__dentry_kill+0x5c/0x1d4) Mar 24 22:01:10 yamada kernel: [<802a906c>] (__dentry_kill) from [<802aa150>] (shrink_dentry_list+0xd4/0xd8) Mar 24 22:01:10 yamada kernel: [<802aa150>] (shrink_dentry_list) from [<802aa4ec>] (prune_dcache_sb+0x50/0x80) Mar 24 22:01:10 yamada kernel: [<802aa4ec>] (prune_dcache_sb) from [<80295684>] (super_cache_scan+0xe0/0x148) Mar 24 22:01:10 yamada kernel: [<80295684>] (super_cache_scan) from [<80241cc4>] (shrink_slab.part.0.constprop.0+0x254/0x398) Mar 24 22:01:10 yamada kernel: [<80241cc4>] (shrink_slab.part.0.constprop.0) from [<80244c7c>] (shrink_node+0x644/0x88c) Mar 24 22:01:10 yamada kernel: [<80244c7c>] (shrink_node) from [<802456a4>] (kswapd+0x4b8/0x748) Mar 24 22:01:10 yamada kernel: [<802456a4>] (kswapd) from [<8013c340>] (kthread+0x154/0x164) Mar 24 22:01:10 yamada kernel: [<8013c340>] (kthread) from [<80100128>] (ret_from_fork+0x14/0x2c) Mar 24 22:01:10 yamada kernel: Exception stack(0x818b3fb0 to 0x818b3ff8) Mar 24 22:01:10 yamada kernel: 3fa0: 00000000 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Mar 24 22:01:10 yamada kernel: 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Mar 24 22:01:10 yamada kernel: Code: e5943008 e594200c e1a00005 e3530000 (e5823000) Mar 24 22:01:10 yamada kernel: ---[ end trace 6b98251daf282d32 ]--- Mar 24 22:01:10 yamada kernel: note: kswapd0[34] exited with preempt_count 3
Re: Debian on Dell Kace M300 March 26, 2022 07:32PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
I'm going to keep watching to see if any more weird problems turn up. it might be that the panic has nothing to do with the uboot flash and the 5.16.5 kernel has some other issues other than USB3 being broken under the hood and a downgrade to 5.15.5 might be warranted in this case... but it's too early to tell yet. I haven't had this sort of panic happen on the Pogo v4 or the E02 running the current kernel so I don't know if this is a guaranteed fault/regression or if this is also a one-time fluke same as above, but I don't know how to recreate the steps to get to the panic in this case.
192.168.0.232 Dell KACE M300 Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021 Debian 10.9 --- System Stats: /dev/sda: TS16GSSD25H-M: no sensor SMART check: PASSED Sat Mar 26 17:24:56 PDT 2022 up 1 week, 1 day, 17 hours, 22 minutesfree -h
total used free shared buff/cache available Mem: 1.7Gi 33Mi 1.5Gi 1.0Mi 169Mi 1.7Gi Swap: 511Mi 0B 511Mi
Re: Debian on Dell Kace M300 March 27, 2022 05:18AM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 March 27, 2022 08:57PM |
Registered: 10 years ago Posts: 226 |
Re: Debian on Dell Kace M300 March 28, 2022 08:25PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 March 28, 2022 08:37PM |
Admin Registered: 13 years ago Posts: 18,821 |
192.168.0.232 Dell KACE M300 Linux version 5.13.6-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sat Jul 31 22:10:39 PDT 2021 Debian 11.3 --- System Stats: /dev/sda: TS16GSSD25H-M: no sensor SMART check: PASSED Mon 28 Mar 2022 06:18:53 PM PDT up 1 week, 3 days, 18 hours, 16 minutes
total used free shared buff/cache available Mem: 1.7Gi 38Mi 89Mi 2.0Mi 1.6Gi 1.6Gi Swap: 511Mi 0.0Ki 511Mi
Re: Debian on Dell Kace M300 March 29, 2022 12:56AM |
Registered: 10 years ago Posts: 226 |
Re: Debian on Dell Kace M300 April 02, 2022 06:15AM |
Registered: 9 years ago Posts: 51 |
Setting up default-jre (2:1.11-72) ... Setting up default-jdk-headless (2:1.11-72) ... Setting up openjdk-11-jdk:armel (11.0.14+9-1~deb11u1) ... update-alternatives: using /usr/lib/jvm/java-11-openjdk-armel/bin/jconsole to provide /usr/bin/jconsole (jconsole) in auto mode Setting up ca-certificates-java (20190909) ... # # A fatal error has been detected by the Java Runtime Environment: # # Internal Error (os_linux_zero.cpp:267), pid=5778, tid=5779 # fatal error: caught unhandled signal 11 # # JRE version: (11.0.14+9) (build ) # Java VM: OpenJDK Zero VM (11.0.14+9-post-Debian-1deb11u1, interpreted mode, serial gc, linux-arm) # No core dump will be written. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again # # An error report file with more information is saved as: # //hs_err_pid5778.log # # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # /var/lib/dpkg/info/ca-certificates-java.postinst: line 88: 5777 Done echo -e "-diginotar_root_ca\n-diginotar_root_ca_pem" 5778 Aborted | java -Xmx64m -jar $JAR -storepass "$storepass" dpkg: error processing package ca-certificates-java (--configure): installed ca-certificates-java package post-installation script subprocess returned error exit status 134 Setting up default-jdk (2:1.11-72) ... Processing triggers for man-db (2.10.1-1~bpo11+1) ... Processing triggers for ca-certificates (20210119) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... # # A fatal error has been detected by the Java Runtime Environment: # # Internal Error (os_linux_zero.cpp:267), pid=6467, tid=6468 # fatal error: caught unhandled signal 11 # # JRE version: (11.0.14+9) (build ) # Java VM: OpenJDK Zero VM (11.0.14+9-post-Debian-1deb11u1, interpreted mode, serial gc, linux-arm) # No core dump will be written. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again # # An error report file with more information is saved as: # /etc/ssl/certs/hs_err_pid6467.log # # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # Aborted E: /etc/ca-certificates/update.d/jks-keystore exited with code 1. done. Processing triggers for mailcap (3.69) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.31-13+deb11u3) ... Errors were encountered while processing: ca-certificates-java E: Sub-process /usr/bin/dpkg returned an error code (1)
Re: Debian on Dell Kace M300 April 02, 2022 03:47PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 April 02, 2022 07:13PM |
Registered: 10 years ago Posts: 226 |
Re: Debian on Dell Kace M300 April 04, 2022 09:46AM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 April 04, 2022 07:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 April 05, 2022 06:59AM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 May 03, 2022 03:50PM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 May 04, 2022 04:33AM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 May 04, 2022 06:58PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 May 04, 2022 08:45PM |
Registered: 9 years ago Posts: 451 |
Re: Debian on Dell Kace M300 May 13, 2022 09:20AM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 May 13, 2022 03:03PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 May 26, 2022 05:01PM |
Registered: 9 years ago Posts: 51 |
Re: Debian on Dell Kace M300 May 26, 2022 05:42PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 May 31, 2022 10:38PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Debian on Dell Kace M300 May 31, 2022 11:09PM |
Registered: 7 years ago Posts: 369 |
Re: Debian on Dell Kace M300 May 31, 2022 11:49PM |
Registered: 9 years ago Posts: 51 |
/dev/mtd1 0x0 00001000 0x00001000as defined in the old guide. but yet the pogo E02 config I have lists /dev/mtd0 as the defined MTD device.