Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 19, 2018 01:42PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 19, 2018 03:45PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 19, 2018 04:13PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 19, 2018 04:47PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
https://forum.doozan.com/read.php?2,23630
Serial Console & JTAG console
Repair Pogo E02 with Raspberry PI (JTAG) and OpenOCD
Serial Port connector - what are people using to make it work
Serial Console hookup - GoFlex Net (external link)
Serial Console hookup - Pogoplug E02 and Pogoplug Pro V3 (external link)
OSX Serial/Net Console
Use Phone Jack - Phone Jack Serial Console Pics
Adding serial connector to Pogoplug Mobile (external link)
WD Mycloud EX2100/4100 Serial Console pic1, also pic2, pic3
Dreamplug Serial Console
How to unbrick your box using serial console with kwboot
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 19, 2018 05:50PM |
Admin Registered: 13 years ago Posts: 18,821 |
bootcmd=run startboot;run bootubi bootdir=/boot bootfilem=uImage bootfilez=zImage bootubi=echo Trying to boot from NAND ...;if run mountubi; then ubifsload ${loadaddr} /boot/zImage;ubifsload ${fdtaddr} /boot/dtbs/${fdtfile};ubifsumount; setenv bootargs console=${console} ubi.mtd=1 root=ubi0:rootfs ro rootfstype=ubifs rootwait ${mtdparts};bootz ${loadaddr} - ${fdtaddr};fi console=ttyS0,115200 ethact=egiga0 fdtaddr=0x800000 fdtdir=/boot/dtbs fdtfile=kirkwood-goflexnet.dtb ipaddr=10.10.10.3 loadaddr=0x810000 loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile} loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfilez} || load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfilem} loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile} mainargs=setenv bootargs console=${console} ${mtdparts} root=${root} rw rootwait ${optargs} ${ncargs} mountubi=ubi part rootfs; ubifsmount ubi0:rootfs mtdids=nand0=orion_nand mtdparts=mtdparts=orion_nand:1M(u-boot),-(rootfs) ncip=10.10.10.5 ncipk=10.10.10.4 netconsole=on preboot=if env exists netconsole && test ${netconsole} = on; then if ping ${ncip}; then setenv stdin nc; setenv stdout nc; setenv stderr nc; version; if env exists ncargsusr; then echo ncargs has been defined by user; setenv ncargs ${ncargsusr}; else setenv ncargs ignore_loglevel netconsole=6665@${ipaddr}/eth0,6666@${ncipk}/; fi; fi; else echo Netconsole has been turned off.; echo To turn it on, set netconsole variable to on.; setenv stdin; setenv stdout; setenv stderr; setenv ncargs; fi rdaddr=0x1100000 rdfile=initramfs-linux.img startboot=usb start; ide reset; for devtype in usb ide; do setenv devnum 0; while ${devtype} dev ${devnum}; do echo ${devtype} found on device ${devnum}; setenv bootpart ${devnum}:1; echo Checking for: ${bootdir}/uEnv.txt ...; if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt; env import -t ${loadaddr} ${filesize}; echo Loaded environment from ${bootdir}/uEnv.txt; echo Checking if uenvcmd is set ...; if test -n ${uenvcmd}; then echo Running uenvcmd ...; run uenvcmd; fi; fi; if run loadimage; then if env exists root; then echo root has been defined by user; else part uuid ${devtype} ${bootpart} uuid; setenv root PARTUUID=${uuid}; fi; run mainargs; if run loadfdt; then if run loadrd; then bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr}; else bootz ${loadaddr} - ${fdtaddr}; fi; else if run loadrd; then echo Booting uImage with initrd; bootm ${loadaddr} ${rdaddr}:${filesize}; else bootm ${loadaddr}; fi; fi; else echo No kernel found; fi; setexpr devnum ${devnum} + 1; done; done;
How to boot Debian rootfs 4.12.1-kirkwood-tld-1 with Arch u-boot 2015 June 19, 2018 07:06PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Updated 24 Jul 2017:
Basic Debian stretch Kirkwood rootfs for most Kirwood plugs:
- tarball size: 188M
- install size: 488M
- The init system used in this rootfs is sysvinit . To boot with systemd, see note 2 below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, and sysvinit-utils.
- see LED controls in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
Download at Dropbox:
Debian-4.12.1-kirkwood-tld-1-rootfs-bodhi.tar.bz2
md5:
bf3d29569943875df348fb5ca03b348c
sha256:
4ed5714fdb123cdb40e973f3d0754e91cd199b75a9874018f2b5dc9cfa8ae8bb
cd /media/sdb1/boot ln -s dts/ dtbs/and sync the drive
sync
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 20, 2018 09:42AM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 20, 2018 02:20PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 20, 2018 06:40PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 21, 2018 02:02PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 21, 2018 03:21PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 22, 2018 11:06AM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 22, 2018 02:40PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 22, 2018 03:48PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 12:55AM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 02:41AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 08:22AM |
Registered: 6 years ago Posts: 24 |
U-Boot 2014.04.R2-1 (May 15 2014 - 14:36:22) Arch Linux ARM Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found IDE device 0 not available IDE device 1 not available no USB devices available no USB devices available GoFlexNet>
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 08:46AM |
Registered: 6 years ago Posts: 24 |
▒▒▒▒▒▒ U-Boot 2014.04.R2-1 (May 15 2014 - 14:36:22) Arch Linux ARM Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found IDE device 0 not available IDE device 1 not available Partition Map for USB device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 42 3913686 00000000-01 83 Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... 4079344 bytes read in 324 ms (12 MiB/s) Booting from 0 ... ## Booting kernel from Legacy Image at 00810000 ... Image Name: Linux-4.2.2-1-ARCH Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4079280 Bytes = 3.9 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.2.2-1-ARCH (builduser@leming) (gcc version 5.2.0 (GCC) ) #1 PREEMPT Thu Oct 1 06:28:12 MDT 2015 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Seagate GoFlex Net [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootwait mtdparts=orion_nand:1M(u-boot),-(rootfs) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 120844K/131072K available (5805K kernel code, 428K rwdata, 1688K rodata, 264K init, 712K bss, 10228K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0759930 (7495 kB) [ 0.000000] .init : 0xc075a000 - 0xc079c000 ( 264 kB) [ 0.000000] .data : 0xc079c000 - 0xc0807254 ( 429 kB) [ 0.000000] .bss : 0xc0807254 - 0xc08b94ec ( 713 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:114 [ 0.000013] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 14.401535] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 14.401723] Console: colour dummy device 80x30 [ 14.401752] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584) [ 14.491621] pid_max: default: 32768 minimum: 301 [ 14.491714] Security Framework initialized [ 14.491786] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 14.491804] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 14.492503] Initializing cgroup subsys blkio [ 14.492533] Initializing cgroup subsys memory [ 14.492598] Initializing cgroup subsys devices [ 14.492624] Initializing cgroup subsys freezer [ 14.492644] Initializing cgroup subsys net_cls [ 14.492661] Initializing cgroup subsys bfqio [ 14.492678] Initializing cgroup subsys perf_event [ 14.492699] Initializing cgroup subsys net_prio [ 14.492779] CPU: Testing write buffer coherency: ok [ 14.493216] Setting up static identity map for 0x81e0 - 0x8238 [ 14.495095] devtmpfs: initialized [ 14.497565] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 14.497996] pinctrl core: initialized pinctrl subsystem [ 14.498708] NET: Registered protocol family 16 [ 14.499176] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 14.521628] cpuidle: using governor ladder [ 14.551624] cpuidle: using governor menu [ 14.551772] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 14.551796] Feroceon L2: Enabling L2 [ 14.551834] Feroceon L2: Cache support initialised. [ 14.583128] vgaarb: loaded [ 14.583458] SCSI subsystem initialized [ 14.583966] usbcore: registered new interface driver usbfs [ 14.584043] usbcore: registered new interface driver hub [ 14.584105] usbcore: registered new device driver usb [ 14.584266] pps_core: LinuxPPS API ver. 1 registered [ 14.584276] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 14.584310] PTP clock support registered [ 14.585377] clocksource: Switched to clocksource orion_clocksource [ 14.616433] FS-Cache: Loaded [ 14.629538] NET: Registered protocol family 2 [ 14.630319] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 14.630346] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 14.630366] TCP: Hash tables configured (established 1024 bind 1024) [ 14.630437] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 14.630462] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 14.630657] NET: Registered protocol family 1 [ 14.632774] futex hash table entries: 256 (order: -1, 3072 bytes) [ 14.645717] VFS: Disk quotas dquot_6.6.0 [ 14.645987] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.648007] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 14.649076] fuse init (API version 7.23) [ 14.655870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 14.655893] io scheduler noop registered [ 14.655907] io scheduler deadline registered [ 14.656203] io scheduler cfq registered [ 14.656702] io scheduler bfq registered (default) [ 14.656711] BFQ I/O-scheduler: v7r8 [ 14.656920] mv_xor mv_xor.0: Marvell shared XOR driver [ 14.696556] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 14.736570] mv_xor mv_xor.0: Marvell XOR (Registers Mode): ( xor cpy ) [ 14.736798] mv_xor mv_xor.1: Marvell shared XOR driver [ 14.776564] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 14.816553] mv_xor mv_xor.1: Marvell XOR (Registers Mode): ( xor cpy ) [ 14.822031] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 14.823107] console [ttyS0] disabled [ 14.843222] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A [ 15.369501] console [ttyS0] enabled [ 15.386450] brd: module loaded [ 15.395645] loop: module loaded [ 15.399184] sata_mv sata_mv.0: cannot get optional clkdev [ 15.404712] sata_mv sata_mv.0: slots 32 ports 2 [ 15.412647] scsi host0: sata_mv [ 15.416391] scsi host1: sata_mv [ 15.419897] ata1: SATA max UDMA/133 irq 21 [ 15.424011] ata2: SATA max UDMA/133 irq 21 [ 15.429012] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 15.435635] nand: Micron MT29F2G08AAD [ 15.439315] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 15.446955] Scanning device for bad blocks [ 15.500510] Bad eraseblock 464 at 0x000003a00000 [ 15.511487] Bad eraseblock 524 at 0x000004180000 [ 15.614878] Bad eraseblock 1453 at 0x00000b5a0000 [ 15.682819] 2 cmdlinepart partitions found on MTD device orion_nand [ 15.689146] Creating 2 MTD partitions on "orion_nand": [ 15.694309] 0x000000000000-0x000000100000 : "u-boot" [ 15.699826] 0x000000100000-0x000010000000 : "rootfs" [ 15.712552] libphy: orion_mdio_bus: probed [ 15.716817] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 15.785407] ata1: SATA link down (SStatus 0 SControl F300) [ 16.155397] ata2: SATA link down (SStatus 0 SControl F300) [ 16.802150] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:26:6d:1d [ 16.811119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 16.817703] ehci-pci: EHCI PCI platform driver [ 16.822229] ehci-orion: EHCI orion driver [ 16.826353] orion-ehci orion-ehci.0: EHCI Host Controller [ 16.831803] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 16.839581] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 16.865408] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 16.872310] hub 1-0:1.0: USB hub found [ 16.876167] hub 1-0:1.0: 1 port detected [ 16.880714] usbcore: registered new interface driver uas [ 16.886239] usbcore: registered new interface driver usb-storage [ 16.892335] usbcore: registered new interface driver ums-alauda [ 16.898389] usbcore: registered new interface driver ums-cypress [ 16.904476] usbcore: registered new interface driver ums-datafab [ 16.910585] usbcore: registered new interface driver ums_eneub6250 [ 16.916879] usbcore: registered new interface driver ums-freecom [ 16.922962] usbcore: registered new interface driver ums-isd200 [ 16.928982] usbcore: registered new interface driver ums-jumpshot [ 16.935151] usbcore: registered new interface driver ums-karma [ 16.941086] usbcore: registered new interface driver ums-onetouch [ 16.947298] usbcore: registered new interface driver ums-realtek [ 16.953386] usbcore: registered new interface driver ums-sddr09 [ 16.959407] usbcore: registered new interface driver ums-sddr55 [ 16.965431] usbcore: registered new interface driver ums-usbat [ 16.971720] mousedev: PS/2 mouse device common for all mice [ 17.195406] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 17.349250] usb-storage 1-1:1.0: USB Mass Storage device detected [ 17.355694] scsi host2: usb-storage 1-1:1.0 [ 17.985403] rtc-mv rtc-mv: internal RTC not ticking [ 17.990446] i2c /dev entries driver [ 17.994562] sdhci: Secure Digital Host Controller Interface driver [ 18.000795] sdhci: Copyright(c) Pierre Ossman [ 18.005241] sdhci-pltfm: SDHCI platform and OF driver helper [ 18.012634] ledtrig-cpu: registered to indicate activity on CPUs [ 18.018850] usbcore: registered new interface driver r8712u [ 18.024699] gre: GRE over IPv4 demultiplexor driver [ 18.029671] NET: Registered protocol family 17 [ 18.034192] Key type dns_resolver registered [ 18.039525] registered taskstats version 1 [ 18.045801] Key type encrypted registered [ 18.050428] console [netcon0] enabled [ 18.054110] netconsole: network logging started [ 18.058818] hctosys: unable to open rtc device (rtc0) [ 18.065133] Waiting for root device /dev/sda1... [ 18.593194] scsi 2:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 18.603032] sd 2:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 18.610629] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 18.616906] sd 2:0:0:0: [sda] Write Protect is off [ 18.622619] sd 2:0:0:0: [sda] No Caching mode page found [ 18.628013] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 18.639183] sda: sda1 [ 18.644996] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 18.726880] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 18.749152] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 18.756952] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 18.770184] devtmpfs: mounted [ 18.774103] Freeing unused kernel memory: 264K (c075a000 - c079c000) [ 19.238199] NET: Registered protocol family 10 [ 19.263019] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.290611] random: systemd urandom read with 34 bits of entropy available [ 19.315643] systemd[1]: systemd 226 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN) [ 19.334109] systemd[1]: Detected architecture arm. Welcome to Arch Linux ARM! [ 19.367007] systemd[1]: Set hostname to <alarm>. [ 20.309365] systemd[1]: display-manager.service: Cannot add dependency job, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 20.330650] systemd[1]: Listening on networkd rtnetlink socket. [ OK ] Listening on networkd rtnetlink socket. [ 20.355834] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 20.388082] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 20.415919] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 20.445852] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 20.475653] systemd[1]: Reached target Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ 20.506533] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ 20.536007] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 20.565917] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 20.595857] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 20.625646] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 20.645920] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 20.665952] systemd[1]: Listening on LVM2 metadata daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. [ 20.695640] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 20.747001] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 20.775726] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 20.796762] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 20.819711] systemd[1]: Mounting Debug File System... Mounting Debug File System... [ 20.845221] systemd[1]: Starting Journal Service... Starting Journal Service... [ 20.879416] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 20.921910] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 20.954276] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 21.012006] systemd[1]: Mounting Temporary Directory... Mounting Temporary Directory... [ 21.050217] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 21.102766] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 21.137036] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 21.166831] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 21.199261] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 21.230255] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 21.279362] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 21.305900] systemd[1]: Mounted Debug File System. [ OK ] Mounted Debug File System. [ 21.335834] systemd[1]: Mounted FUSE Control File System. [ OK ] Mounted FUSE Control File System. [ 21.365789] systemd[1]: Mounted Temporary Directory. [ OK ] Mounted Temporary Directory. [ 21.389171] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 21.418798] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ 21.447558] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ 21.477493] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 21.707240] systemd-journald[100]: File /var/log/journal/5e0ba6d2a3c54f4fbabbd2d933e8fb48/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 22.121312] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 22.169964] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 22.210180] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 22.320364] systemd[1]: Started Create Static Device Nodes in /dev. [ OK ] Started Create Static Device Nodes in /dev. [ 22.377653] systemd[1]: Started Load/Save Random Seed. [ OK ] Started Load/Save Random Seed. [ 22.772833] systemd[1]: Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems (Pre). [ 22.825972] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 22.860805] systemd[1]: Starting udev Kernel Device Manager... Starting udev Kernel Device Manager... [ 22.906329] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. Starting Flush Journal to Persistent Storage... [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. [ 23.160240] systemd-journald[100]: Received request to flush runtime journal from PID 1 [ 24.286071] random: nonblocking pool is initialized [ OK ] Found device /dev/ttyS0. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily man-db cache update. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Entropy Harvesting Daemon. Starting Permit User Sessions... Starting Login Service... Starting SSH Key Generation... [ OK ] Started D-Bus System Message Bus. Starting Network Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily verification of password and group files. [ OK ] Reached target Timers. [ OK ] Started Permit User Sessions. [ OK ] Started SSH Key Generation. [ OK ] Started Network Service. [ OK ] Started Login Service. [ OK ] Reached target Network. Starting Network Name Resolution... [ OK ] Started OpenSSH Daemon. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ 32.405924] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started Network Name Resolution. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Arch Linux 4.2.2-1-ARCH (ttyS0) alarm login:
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 08:54AM |
Registered: 6 years ago Posts: 24 |
U-Boot 2014.04.R2-1 (May 15 2014 - 14:36:22) Arch Linux ARM Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found IDE device 0 not available IDE device 1 not available Partition Map for USB device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x00e73fde "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: bb66931d-c017-4141-b1f9-5c2331ea1a1c Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... EHCI timed out on TD - token=0x90008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 EHCI timed out on TD - token=0x80008d80 ** ext4fs_devread read error - block no USB devices available GoFlexNet>
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 04:32PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 04:38PM |
Registered: 6 years ago Posts: 24 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 04:42PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Arch Linux 4.2.2-1-ARCH (ttyS0)
alarm login:
Quote
Running default loaduimage ...
EHCI timed out on TD - token=0x90008d80
EHCI timed out on TD - token=0x80008d80
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 04:51PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 04:53PM |
Registered: 6 years ago Posts: 24 |
>Quote
Arch Linux 4.2.2-1-ARCH (ttyS0)
>
> alarm login:
>Quote
Running default loaduimage ...
> EHCI timed out on TD - token=0x90008d80
> EHCI timed out on TD - token=0x80008d80
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 05:33PM |
Registered: 6 years ago Posts: 24 |
U-Boot 2014.04.R2-1 (May 15 2014 - 14:36:22) Arch Linux ARM Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed (Re)start USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found IDE device 0 not available IDE device 1 not available Partition Map for USB device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x0773efde "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 guid: ebc8a46f-07d1-4a71-a593-df914a37b8d2 Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... 3833487 bytes read in 863 ms (4.2 MiB/s) Booting from 0 ... ## Booting kernel from Legacy Image at 00810000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3833423 Bytes = 3.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Seagate GoFlex Net [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag es: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootw ait mtdparts=orion_nand:1M(u-boot),-(rootfs) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 116496K/131072K available (8192K kernel code, 716K rwdata , 1972K rodata, 1024K init, 288K bss, 14576K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) [ 0.000000] .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.000042] Switching to timer-based delay loop, resolution 5ns [ 0.000514] Console: colour dummy device 80x30 [ 0.000548] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000571] pid_max: default: 32768 minimum: 301 [ 0.000766] Security Framework initialized [ 0.000886] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000906] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001775] CPU: Testing write buffer coherency: ok [ 0.002821] Setting up static identity map for 0x100000 - 0x100058 [ 0.003091] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.006363] devtmpfs: initialized [ 0.010801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.010829] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.011228] prandom: seed boundary self test passed [ 0.014983] prandom: 100 self tests passed [ 0.014995] pinctrl core: initialized pinctrl subsystem [ 0.016156] NET: Registered protocol family 16 [ 0.016648] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.018265] cpuidle: using governor ladder [ 0.018337] cpuidle: using governor menu [ 0.018789] Feroceon L2: Enabling L2 [ 0.018836] Feroceon L2: Cache support initialised. [ 0.019196] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet 0-port@0: local-mac-address is not set [ 0.024032] No ATAGs? [ 0.033339] vgaarb: loaded [ 0.033664] SCSI subsystem initialized [ 0.034145] usbcore: registered new interface driver usbfs [ 0.034223] usbcore: registered new interface driver hub [ 0.034305] usbcore: registered new device driver usb [ 0.035450] clocksource: Switched to clocksource orion_clocksource [ 0.125128] VFS: Disk quotas dquot_6.6.0 [ 0.125224] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.135903] NET: Registered protocol family 2 [ 0.136658] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.136685] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.136706] TCP: Hash tables configured (established 1024 bind 1024) [ 0.136793] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.136818] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.136996] NET: Registered protocol family 1 [ 0.137419] RPC: Registered named UNIX socket transport module. [ 0.137432] RPC: Registered udp transport module. [ 0.137439] RPC: Registered tcp transport module. [ 0.137446] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.137825] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.138770] audit: initializing netlink subsys (disabled) [ 0.139231] Initialise system trusted keyrings [ 0.139281] Key type blacklist registered [ 0.139374] audit: type=2000 audit(0.133:1): state=initialized audit_enabled= 0 res=1 [ 0.139460] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.139528] zbud: loaded [ 0.140525] NFS: Registering the id_resolver key type [ 0.140550] Key type id_resolver registered [ 0.140559] Key type id_legacy registered [ 0.140577] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.140587] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.140781] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.140980] fuse init (API version 7.26) [ 0.141352] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.141622] orangefs_init: module version upstream loaded [ 0.141634] SGI XFS with ACLs, security attributes, realtime, no debug enable d [ 2.555459] random: fast init done [ 6.007499] Key type asymmetric registered [ 6.007516] Asymmetric key parser 'x509' registered [ 6.007583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 6.007594] io scheduler noop registered [ 6.007603] io scheduler deadline registered [ 6.007681] io scheduler cfq registered (default) [ 6.008941] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 6.010701] mv_xor f1060800.xor: Marvell shared XOR driver [ 6.066212] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg i ntr ) [ 6.066450] mv_xor f1060900.xor: Marvell shared XOR driver [ 6.126208] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg i ntr ) [ 6.126638] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.127932] console [ttyS0] disabled [ 6.128002] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 6.717936] console [ttyS0] enabled [ 6.730091] loop: module loaded [ 6.733825] sata_mv f1080000.sata: slots 32 ports 2 [ 6.741574] scsi host0: sata_mv [ 6.745159] scsi host1: sata_mv [ 6.748600] ata1: SATA max UDMA/133 irq 32 [ 6.752716] ata2: SATA max UDMA/133 irq 32 [ 6.757789] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 6.764253] nand: Micron MT29F2G08AAD [ 6.767964] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 6.775596] Scanning device for bad blocks [ 6.829368] Bad eraseblock 464 at 0x000003a00000 [ 6.840377] Bad eraseblock 524 at 0x000004180000 [ 6.944325] Bad eraseblock 1453 at 0x00000b5a0000 [ 7.012613] 2 cmdlinepart partitions found on MTD device orion_nand [ 7.018948] Creating 2 MTD partitions on "orion_nand": [ 7.024143] 0x000000000000-0x000000100000 : "u-boot" [ 7.030427] 0x000000100000-0x000010000000 : "rootfs" [ 7.039540] libphy: Fixed MDIO Bus: probed [ 7.044549] libphy: orion_mdio_bus: probed [ 7.049630] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.086923] ata1: SATA link down (SStatus 0 SControl F300) [ 7.426873] ata2: SATA link down (SStatus 0 SControl F300) [ 8.162030] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:26:6d:1d [ 8.170933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.177538] ehci-pci: EHCI PCI platform driver [ 8.182065] ehci-orion: EHCI orion driver [ 8.186322] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.191866] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 8.199754] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 8.235484] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.241758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.248612] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 8.255890] usb usb1: Product: EHCI Host Controller [ 8.260788] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 8.267538] usb usb1: SerialNumber: f1050000.ehci [ 8.273016] hub 1-0:1.0: USB hub found [ 8.276884] hub 1-0:1.0: 1 port detected [ 8.281463] usbcore: registered new interface driver usb-storage [ 8.287873] mousedev: PS/2 mouse device common for all mice [ 8.635482] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.831008] usb 1-1: New USB device found, idVendor=05dc, idProduct=a83a [ 8.837769] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.844961] usb 1-1: Product: USB Flash Drive [ 8.849356] usb 1-1: Manufacturer: Lexar [ 8.853295] usb 1-1: SerialNumber: AA42XWF4SX8BX5KJFV [ 8.859718] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.866218] scsi host2: usb-storage 1-1:1.0 [ 9.365480] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.371084] i2c /dev entries driver [ 9.377077] hidraw: raw HID events driver (C) Jiri Kosina [ 9.382881] drop_monitor: Initializing network drop monitor service [ 9.389472] NET: Registered protocol family 17 [ 9.394016] Key type dns_resolver registered [ 9.399117] registered taskstats version 1 [ 9.403237] Loading compiled-in X.509 certificates [ 9.408140] zswap: loaded using pool lzo/zbud [ 9.414944] Key type big_key registered [ 9.420764] Key type encrypted registered [ 9.426158] hctosys: unable to open rtc device (rtc0) [ 9.431707] Waiting for root device /dev/sda1... [ 10.280237] scsi 2:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ : 0 ANSI: 6 [ 10.290560] sd 2:0:0:0: [sda] 125038592 512-byte logical blocks: (64.0 GB/59. 6 GiB) [ 10.299166] sd 2:0:0:0: [sda] Write Protect is off [ 10.304789] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 10.330309] sda: sda1 [ 10.336544] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 10.344038] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste m [ 10.371869] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 10.379656] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 10.389960] devtmpfs: mounted [ 10.396246] Freeing unused kernel memory: 1024K INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. ERROR: could not open /proc/stat: No such file or directory findfs: unable to resolve 'LABEL=rootfs' [warn] Files under mount point '/run' will be hidden. ... (warning). [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [....] Waiting for /dev to be fully populated...[ 12.610047] marvell-cesa f103 0000.crypto: CESA device successfully registered [ 12.649449] orion_wdt: Initial timeout 21 sec [ 12.698882] usbcore: registered new interface driver uas [ 12.766501] sd 2:0:0:0: Attached scsi generic sg0 type 0 done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 14.080178] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1 e2fsck 1.43.4 (31-Jan-2017) rootfs: clean, 14457/3907584 files, 494346/15629563 blocks . ok [ 14.616253] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs [ ok hat location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [....] Initializing random numbe[ 17.049467] random: crng init done [ ok erator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:10:75:26:6d:1d Sending on LPF/eth0/00:10:75:26:6d:1d Sending on Socket/fallback DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67
[ 98.704103] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 98.710671] Segment Routing with IPv6 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 No DHCPOFFERS received. Trying recorded lease 192.168.0.14 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1256 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting system message bus: dbus. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1255 (klogd) . ok [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login:
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 23, 2018 06:21PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
4. Create uImage with embedded DTB for booting with older u-boots (2012 or earlier). Skip this step if you have installed the latest U-Boot for Kirkwood (or are installing this u-boot at the same time).
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box (see the folder /media/sdb1/boot/dts for the exact spelling of your Kirkwood box name).
Generate the uImage with DTB embedded inside:
cd /media/sdb1/boot
cp -a zImage-4.12.1-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mv uImage uImage.orig
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-4.12.1-kirkwood-tld-1 -d zImage.fdt uImage
sync
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 24, 2018 03:00AM |
Registered: 6 years ago Posts: 24 |
Quote
4. Create uImage with embedded DTB for
> booting with older u-boots (2012 or earlier). Skip
> this step if you have installed the latest U-Boot
> for Kirkwood (or are installing this u-boot at the
> same time).
>
> Please replace kirkwood-goflexnet.dtb below with
> the correct DTB name for your box (see the folder
> /media/sdb1/boot/dts for the exact spelling of
> your Kirkwood box name).
>
> Generate the uImage with DTB embedded inside:
> cd /media/sdb1/boot
> cp -a zImage-4.12.1-kirkwood-tld-1 zImage.fdt
> cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
> mv uImage uImage.orig
> mkimage -A arm -O linux -T kernel -C none -a
> 0x00008000 -e 0x00008000 -n
> Linux-4.12.1-kirkwood-tld-1 -d zImage.fdt uImage
> sync
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 24, 2018 04:11AM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 24, 2018 08:04AM |
Registered: 6 years ago Posts: 24 |
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:17:19 -0700) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ## Unknown partition table type 0 ## Unknown partition table type 0 Partition Map for USB device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x003bbfde "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 type: linux guid: c7dcc962-9672-4062-8dcf-46b090dad85b Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... 3821592 bytes read in 1002 ms (3.6 MiB/s) Booting from 0 ... ## Booting kernel from Legacy Image at 00810000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2017-07-20 8:11:24 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3821528 Bytes = 3.6 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000c11). Available machine support: ID (hex) NAME ffffffff Generic DT based system ffffffff Marvell Kirkwood (Flattened Device Tree) Please check your kernel config and/or bootloader.
U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:17:19 -0700) Seagate GoFlex Net SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Reset IDE: ide_preinit failed starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found ## Unknown partition table type 0 ## Unknown partition table type 0 Partition Map for USB device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000800 0x003bbfde "" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 type: linux guid: c7dcc962-9672-4062-8dcf-46b090dad85b Attempting to boot from usb 0:1... ** File not found /boot/uEnv.txt ** Checking if uenvcmd is set ... Running default loadzimage ... ** File not found /boot/zImage ** Running default loaduimage ... 3833487 bytes read in 1004 ms (3.6 MiB/s) Booting from 0 ... ## Booting kernel from Legacy Image at 00810000 ... Image Name: Linux-4.12.1-kirkwood-tld-1 Created: 2018-06-24 13:07:18 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3833423 Bytes = 3.7 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.12.1-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Sat Jul 15 21:40:50 PDT 2017 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Seagate GoFlex Net [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rw rootwait mtdparts=orion_nand:1M(u-boot),-(rootfs) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 116496K/131072K available (8192K kernel code, 716K rwdata, 1972K rodata, 1024K init, 288K bss, 14576K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0900000 (9184 kB) [ 0.000000] .init : 0xc0c00000 - 0xc0d00000 (1024 kB) [ 0.000000] .data : 0xc0d00000 - 0xc0db3274 ( 717 kB) [ 0.000000] .bss : 0xc0db9b9c - 0xc0e01e60 ( 289 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000007] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000042] Switching to timer-based delay loop, resolution 5ns [ 0.000512] Console: colour dummy device 80x30 [ 0.000545] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000566] pid_max: default: 32768 minimum: 301 [ 0.000762] Security Framework initialized [ 0.000886] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000905] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001772] CPU: Testing write buffer coherency: ok [ 0.002817] Setting up static identity map for 0x100000 - 0x100058 [ 0.003087] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.006360] devtmpfs: initialized [ 0.010818] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.010845] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.011245] prandom: seed boundary self test passed [ 0.015001] prandom: 100 self tests passed [ 0.015012] pinctrl core: initialized pinctrl subsystem [ 0.016172] NET: Registered protocol family 16 [ 0.016667] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.018278] cpuidle: using governor ladder [ 0.018350] cpuidle: using governor menu [ 0.018801] Feroceon L2: Enabling L2 [ 0.018848] Feroceon L2: Cache support initialised. [ 0.019208] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.024043] No ATAGs? [ 0.033335] vgaarb: loaded [ 0.033661] SCSI subsystem initialized [ 0.034144] usbcore: registered new interface driver usbfs [ 0.034220] usbcore: registered new interface driver hub [ 0.034303] usbcore: registered new device driver usb [ 0.035442] clocksource: Switched to clocksource orion_clocksource [ 0.125147] VFS: Disk quotas dquot_6.6.0 [ 0.125243] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.135912] NET: Registered protocol family 2 [ 0.136667] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.136694] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.136715] TCP: Hash tables configured (established 1024 bind 1024) [ 0.136805] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.136830] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.137009] NET: Registered protocol family 1 [ 0.137431] RPC: Registered named UNIX socket transport module. [ 0.137443] RPC: Registered udp transport module. [ 0.137451] RPC: Registered tcp transport module. [ 0.137458] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.137835] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.138775] audit: initializing netlink subsys (disabled) [ 0.139236] Initialise system trusted keyrings [ 0.139286] Key type blacklist registered [ 0.139385] audit: type=2000 audit(0.133:1): state=initialized audit_enabled=0 res=1 [ 0.139472] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.139540] zbud: loaded [ 0.140539] NFS: Registering the id_resolver key type [ 0.140571] Key type id_resolver registered [ 0.140580] Key type id_legacy registered [ 0.140598] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.140608] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.140803] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.141004] fuse init (API version 7.26) [ 0.141379] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.141649] orangefs_init: module version upstream loaded [ 0.141661] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 2.555451] random: fast init done [ 6.007898] Key type asymmetric registered [ 6.007915] Asymmetric key parser 'x509' registered [ 6.007983] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 6.007994] io scheduler noop registered [ 6.008002] io scheduler deadline registered [ 6.008079] io scheduler cfq registered (default) [ 6.009341] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 6.011109] mv_xor f1060800.xor: Marvell shared XOR driver [ 6.066206] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 6.066446] mv_xor f1060900.xor: Marvell shared XOR driver [ 6.126199] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr ) [ 6.126627] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 6.127922] console [ttyS0] disabled [ 6.127991] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 25, base_baud = 12500000) is a 16550A [ 6.717925] console [ttyS0] enabled [ 6.730065] loop: module loaded [ 6.733795] sata_mv f1080000.sata: slots 32 ports 2 [ 6.741548] scsi host0: sata_mv [ 6.745136] scsi host1: sata_mv [ 6.748573] ata1: SATA max UDMA/133 irq 32 [ 6.752689] ata2: SATA max UDMA/133 irq 32 [ 6.757762] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 6.764227] nand: Micron MT29F2G08AAD [ 6.767939] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 6.775571] Scanning device for bad blocks [ 6.829360] Bad eraseblock 464 at 0x000003a00000 [ 6.840376] Bad eraseblock 524 at 0x000004180000 [ 6.944322] Bad eraseblock 1453 at 0x00000b5a0000 [ 7.012605] 2 cmdlinepart partitions found on MTD device orion_nand [ 7.018939] Creating 2 MTD partitions on "orion_nand": [ 7.024133] 0x000000000000-0x000000100000 : "u-boot" [ 7.030412] 0x000000100000-0x000010000000 : "rootfs" [ 7.039522] libphy: Fixed MDIO Bus: probed [ 7.044526] libphy: orion_mdio_bus: probed [ 7.049605] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 7.086896] ata1: SATA link down (SStatus 0 SControl F300) [ 7.426862] ata2: SATA link down (SStatus 0 SControl F300) [ 8.162048] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:10:75:26:6d:1d [ 8.170947] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.177545] ehci-pci: EHCI PCI platform driver [ 8.182072] ehci-orion: EHCI orion driver [ 8.186334] orion-ehci f1050000.ehci: EHCI Host Controller [ 8.191874] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 8.199764] orion-ehci f1050000.ehci: irq 29, io mem 0xf1050000 [ 8.235476] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 8.241760] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.248609] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.255889] usb usb1: Product: EHCI Host Controller [ 8.260787] usb usb1: Manufacturer: Linux 4.12.1-kirkwood-tld-1 ehci_hcd [ 8.267539] usb usb1: SerialNumber: f1050000.ehci [ 8.273015] hub 1-0:1.0: USB hub found [ 8.276884] hub 1-0:1.0: 1 port detected [ 8.281463] usbcore: registered new interface driver usb-storage [ 8.287873] mousedev: PS/2 mouse device common for all mice [ 8.635475] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 8.828394] usb 1-1: New USB device found, idVendor=090c, idProduct=1000 [ 8.835145] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.842354] usb 1-1: Product: Flash Disk [ 8.846312] usb 1-1: Manufacturer: USB [ 8.850076] usb 1-1: SerialNumber: FBF1009232302582 [ 8.855726] usb-storage 1-1:1.0: USB Mass Storage device detected [ 8.862176] scsi host2: usb-storage 1-1:1.0 [ 9.365472] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.371072] i2c /dev entries driver [ 9.377065] hidraw: raw HID events driver (C) Jiri Kosina [ 9.382871] drop_monitor: Initializing network drop monitor service [ 9.389461] NET: Registered protocol family 17 [ 9.394008] Key type dns_resolver registered [ 9.399116] registered taskstats version 1 [ 9.403236] Loading compiled-in X.509 certificates [ 9.408139] zswap: loaded using pool lzo/zbud [ 9.414950] Key type big_key registered [ 9.420760] Key type encrypted registered [ 9.426149] hctosys: unable to open rtc device (rtc0) [ 9.431701] Waiting for root device /dev/sda1... [ 10.154991] scsi 2:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 10.165316] sd 2:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.87 GiB) [ 10.173799] sd 2:0:0:0: [sda] Write Protect is off [ 10.179547] sd 2:0:0:0: [sda] No Caching mode page found [ 10.184907] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 10.209443] sda: sda1 [ 10.215304] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 10.222422] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 10.244092] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 10.251944] VFS: Mounted root (ext3 filesystem) on device 8:1. [ 10.265092] devtmpfs: mounted [ 10.271423] Freeing unused kernel memory: 1024K INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. ERROR: could not open /proc/stat: No such file or directory findfs: unable to resolve 'LABEL=rootfs' [warn] Files under mount point '/run' will be hidden. ... (warning). [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232 . ok [ ok ] Synthesizing the initial hotplug events...done. [....] Waiting for /dev to be fully populated...[ 12.547045] marvell-cesa f1030000.crypto: CESA device successfully registered [ 12.580388] orion_wdt: Initial timeout 21 sec [ 12.617320] usbcore: registered new interface driver uas [ 12.681719] sd 2:0:0:0: Attached scsi generic sg0 type 0 done. [ ok ] Setting hostname to 'debian'...done. [ ok ] Activating swap:. [ 18.119078] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Will now check root file system:fsck from util-linux 2.29.2 [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -y -C0 /dev/sda1 e2fsck 1.43.4 (31-Jan-2017) rootfs: clean, 14457/122400 files, 186851/489211 blocks . ok [ 18.529373] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ ok ] Will now activate lvm and md swap:done. [info] Will now check all file systems. [ 19.381973] random: crng init done fsck from util-linux 2.29.2 Checking all file systems. LABEL=rootfs is mounted [....] Done checking file systems. A log is being saved in /var/log/fsck/checkfs[ ok hat location is writable.. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done. [ ok . [ ok ] Will now mount local filesystems:. [ ok ] Will now activate swapfile swap:done. [ ok ] Checking minimum space in /tmp...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables...done. [ ok ] Initializing random number generator...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5 Copyright 2004-2016 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:10:75:26:6d:1d Sending on LPF/eth0/00:10:75:26:6d:1d Sending on Socket/fallback DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 NET: Registered protocol family 10 [ 100.828309] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 100.834360] Segment Routing with IPv6 DHCPREQUEST of 192.168.0.14 on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 No DHCPOFFERS received. Trying recorded lease 192.168.0.14 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. --- 192.168.0.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. done. [ ok ] Starting RPC port mapper daemon: rpcbind. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1256 (syslogd) . ok [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting system message bus: dbus. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [ ok ] Starting OpenBSD Secure Shell server: sshd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1255 (klogd) . ok [ ok ] Running local boot scripts (/etc/rc.local). Debian GNU/Linux 9 debian ttyS0 debian login:
Re: Want to have Debian / OpenMediaVault on GoFlexNet, stuck with ArchLinuxARM June 24, 2018 09:52AM |
Registered: 6 years ago Posts: 24 |
root@FA78:~# apt-get install openmediavault Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault : Depends: php5-fpm but it is not installable Depends: php5-cgi but it is not installable Depends: php5-cli but it is not installable Depends: php5-pam but it is not going to be installed Depends: openssh-blacklist-extra but it is not installable Depends: php5-proctitle but it is not going to be installed E: Unable to correct problems, you have held broken packages.