/dev/sda1 not available from initramfs - unable te boot September 13, 2010 06:30AM |
Registered: 14 years ago Posts: 2 |
U-Boot 2010.06-00695-gbd23130-dirty (Aug 30 2010 - 23:04:56) Marvell-Dockstar/Pogoplug by Jeff Doozan SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Loading file "/boot/uImage" from usb device 0:1 (usbda1) 1430120 bytes read Loading file "/boot/uInitrd" from usb device 0:1 (usbda1) 1135864 bytes read ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-2.6.32-5 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1430056 Bytes = 1.4 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: initramfs Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 1135800 Bytes = 1.1 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. ... [ 23.480388] NET: Registered protocol family 17 [ 23.485204] registered taskstats version 1 [ 23.489988] /build/buildd-linux-2.6_2.6.32-21-armel-oPaHL5/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 23.504595] Initalizing network drop monitor service [ 23.509643] Freeing init memory: 124K Loading, please wait... [ 23.560972] udev: starting version 160 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Waiting for root file system ... done. Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda1 does not exist. Dropping to a shell! (initramfs)The full bootlog is available at http://paste.debian.net
Re: /dev/sda1 not available from initramfs - unable te boot September 13, 2010 06:57AM |
Registered: 14 years ago Posts: 107 |
Re: /dev/sda1 not available from initramfs - unable te boot September 13, 2010 07:35AM |
Registered: 14 years ago Posts: 2 |
(initramfs) ls /lib/modules/2.6.32-5-kirkwood drwxr-xr-x 2 0 0 0 . drwxr-xr-x 3 0 0 0 .. -rw-r--r-- 1 0 0 52 modules.devname -rw-r--r-- 1 0 0 49 modules.symbols -rw-r--r-- 1 0 0 131 modules.softdep -rw-r--r-- 1 0 0 12 modules.symbols.bin -rw-r--r-- 1 0 0 45 modules.alias -rw-r--r-- 1 0 0 12 modules.alias.bin -rw-r--r-- 1 0 0 0 modules.dep -rw-r--r-- 1 0 0 12 modules.dep.bin