Welcome! Log In Create A New Profile

Advanced

Synology Diskstation DS414 Unbricking

Posted by bignellrp 
Re: Synology Diskstation DS414 Unbricking
February 19, 2021 03:13PM
That’s exactly the message I had. You can follow the steps in the guide I wrote and you should be able to restore.

Don’t worry, it’s not lost. You will get it back.
Re: Synology Diskstation DS414 Unbricking
February 23, 2021 05:50AM
Update

After searching on Google i fount next post:
https://conetix.com.au/blog/synology-nas-bootrom-recovery/
I was able to follow point by point and the unit DS414 started.
The problem was that at each restart need to follow the instruction again.

After installing the last DSM update the unit didn't shutdown. I try to shutdown from the UART console but no nothing happened. I leave it for 2 hour hoping that will restart then i unplug the unit. Fortunately the unit started and loaded the DSM. Restart is also working.

Hope that will help you guys.
VectraT
Re: Synology Diskstation DS414 Unbricking
March 02, 2021 07:07AM
Hi!
For today I can load zImage and rd.bin via serial to synology, but still no lan connection.
What is the right command to set boot?
I did "setenv bootcmd bootm 8000000 7500000 3B84008"
"saveenv"
When I just give command "reboot", it reboots, but when I power it off and on again, it says after u-boot:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ALPINE_DB>

So I made a mistake with this "setenv bootcmd..."
What could be the right command?
Re: Synology Diskstation DS414 Unbricking
March 02, 2021 04:11PM
VectraT,

Need a quote/double-quote when there is a space.
setenv bootcmd 'bootm 8000000 7500000 3B84008'



Edited 1 time(s). Last edit at 03/02/2021 04:12PM by bodhi.
VectraT
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 01:59AM
Thank's bodhi, I'll try it right away!
VectraT
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 02:51AM
setenv bootcmd 'bootm 08000000 07500000 03B84008'

As soon I pull the wire off and plug it back again, it says:

Press Ctrl+C to abort autoboot in 3 second
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ALPINE_DB>

If I entered "reboot", it reboots ok.
How I can add "print" to boot, to see the boot process?
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 04:18AM
VectraT,

> How I can add "print" to boot, to see the boot
> process?

There is no "verbose" mode that will print out everything. However, in each env, you can put an echo command to print out something. For example,

setenv bootcmd 'echo Booting stock OS...;  bootm 08000000 07500000 03B84008'
And so on, so you can see the part of a long env where it failed.

And you can print out an env witth echo, too. For example,

setenv loadaddr 0x08000000
setenv bootcmd 'echo Booting stock OS... at $(loadaddr);  bootm $(loadaddr)  07500000 03B84008'

BTW, it is good practice to use 0x notation such as 0x08000000.

-bodhi
===========================
Forum Wiki
bodhi's corner
VectraT
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 02:19PM
Loaded zImage to 0x08000000
rd.bin to 0x07500000
with Tera Term "loady" command

setenv bootcmd 'bootm 0x08000000 0x07500000 0x03B84008'
saveenv
boot
Booted to diskstation (not showing list what is booting, as on original firmware)
Turned it off by button and then on again -

Press Ctrl+C to abort autoboot in 3 second
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ALPINE_DB>

So, my question is, why boot files are not saved?
VectraT
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 03:00PM
And again...loady+ loady (10 minutes), setenv, saveenv, boots up, give command "reboot", boots up, give command "reboot", boots up,disconnect power and here I am again...
Wrong Image Format for bootm command
ERROR: can't get kernel image!
ALPINE_DB>
Kinda frustrating...and still not getting IP-address...
It will be smart give up, not to waste my time with this DS416 any more, and throw it in the trash...:(
Re: Synology Diskstation DS414 Unbricking
March 03, 2021 05:12PM
VectraT,

> Kinda frustrating...and still not getting
> IP-address...
> It will be smart give up, not to waste my time
> with this DS416 any more, and throw it in the
> trash...:(

Nah, you're close to fix it.

So at the u-boot prompt

ALPINE_DB>

Set the envs like you did. And then list all envs

printenv

And then boot

boot
or
run bootcmd

Post the log here to see where the problem is.

Later on after you saveenv, they should be permanently changed. If they were not, then this u-boot has reset them back to internal values. In that case, you would need to boot with serial console temporarily this way until you can reflash stock.

-bodhi
===========================
Forum Wiki
bodhi's corner
VectraT
Re: Synology Diskstation DS414 Unbricking
March 04, 2021 02:01AM
loady+printenv:

ALPINE_DB> loady 0x08000000
## Ready for binary (ymodem) download to 0x08000000 at 115200 

bps...
CCxyzModem - CRC mode, 2(SOH)/2388(STX)/0(CAN) packets, 4 

retries
## Total Size      = 0x00254e08 = 2444808 Bytes
ALPINE_DB> loady 0x07500000
## Ready for binary (ymodem) download to 0x07500000 at 115200 

bps...
CCxyzModem - CRC mode, 1(SOH)/3567(STX)/0(CAN) packets, 6 

retries
## Total Size      = 0x0037bb79 = 3652473 Bytes
ALPINE_DB> setenv bootcmd 'bootm 08000000 07500000 03B84008'
ALPINE_DB> saveenv
Saving Environment to SPI Flash...
SF: Detected MX25U6435F with page size 256 Bytes, erase size 64 

KiB, total 8 MiB
Erasing SPI flash...Writing to SPI flash...done
ALPINE_DB> printenv
arch=arm
ata_hdd_act_led=syno_hdd_act_led=10,11,22,23
ata_hdd_detect=
ata_hdd_enable=syno_hdd_enable=24,25,26,27
autoload=n
baudrate=115200
board=alpine_db
board_name=alpine_db
boot_instance_active=0
boot_instance_non_active=1
boot_recovery=yes
bootargs=
bootcmd=bootm 08000000 07500000 03B84008
bootdelay=2
bootm=0x08000000
bootsmd=bootm 8000000
bootspi=sf probe;sf read $loadaddr_kernel $spi_pt_addr_kernel 

$spi_pt_size_kernel;sf read $loadaddr_rootfs $spi_pt_addr_fs 

$spi_pt_size_fs;bootm $loadaddr_kernel $loadaddr_rootfs 

$fdtaddr;
clean_env=sf probe; sf erase $spi_pt_addr_env $spi_pt_size_env;
cpu=armv7
cvos_tags=0x01000000
cvos_tags_seed_a=0x01000004
cvos_tags_seed_b=0x01000008
cvos_tags_validate=mw.l ${cvos_tags} 0xcf05cf05
default_bootcmd=run 0x08000000
dnsip=192.168.1.1
dt_filename=dt.img
dt_is_from_toc=1
dt_location=89000
env_offset=7e0000
env_offset_redund=7f0000
eth0=00:11:32:4A:19:A0
eth0addr=00:11:32:4A:19:9F
eth1=00:11:32:4A:19:9F
eth1addr=52:9d:99:48:82:4e
ethact=al_eth1
ethaddr=00:11:32:4A:19:9F
ethprime=al_eth0
fdtaddr=3b84008
file_dt=alpine/alpine_db.dtb
file_eeprom=alpine/eeprom
file_flash=alpine/flash.bin
file_kernel=alpine/uImage
file_rootfs=alpine/rd.bin
file_uboot=alpine/u-boot.img.withdt
filesize=37bb79
fix_sata_link_speed=mw.l 0xfc8f821c 0x4000000;mw.l 0xfc9f821c 

0x4000000;
fwupd=tftpboot ${tftpdir}uboot_script_fw_update.bin;source 

${loadaddr}
gatewayip=192.168.1.1
iocc_force=1
iocc_force_val=1
ipaddr=192.168.1.102
loadaddr=0x08000000
loadaddr_dt=0x07000000
loadaddr_kernel=0x08000000
loadaddr_rootfs=0x07500000
mmcdev=0
netmask=255.255.255.0
opt_ata1=serdes wr 1 p0 pma 201 7 0 0xFC;serdes wr 1 p0 pma 202 

7 0 0xff;serdes wr 1 p0 pma 203 7 0 0xff;serdes wr 1 p0 pma 204 

7 0 0xff;serdes wr 1 p0 pma 205 7 0 0x7f;serdes wr 1 p0 pma 205 

7 0 0xff;
opt_ata2=serdes wr 1 p1 pma 201 7 0 0xFC;serdes wr 1 p1 pma 202 

7 0 0xff;serdes wr 1 p1 pma 203 7 0 0xff;serdes wr 1 p1 pma 204 

7 0 0xff;serdes wr 1 p1 pma 205 7 0 0x7f;serdes wr 1 p1 pma 205 

7 0 0xff;
opt_ata3=serdes wr 1 p2 pma 201 7 0 0xFC;serdes wr 1 p2 pma 202 

7 0 0xff;serdes wr 1 p2 pma 203 7 0 0xff;serdes wr 1 p2 pma 204 

7 0 0xff;serdes wr 1 p2 pma 205 7 0 0x7f;serdes wr 1 p2 pma 205 

7 0 0xff;
opt_ata4=serdes wr 1 p3 pma 201 7 0 0xFC;serdes wr 1 p3 pma 202 

7 0 0xff;serdes wr 1 p3 pma 203 7 0 0xff;serdes wr 1 p3 pma 204 

7 0 0xff;serdes wr 1 p3 pma 205 7 0 0x7f;serdes wr 1 p3 pma 205 

7 0 0xff;
opt_ata5=serdes wr 2 p0 pma 201 7 0 0xFC;serdes wr 2 p0 pma 202 

7 0 0xff;serdes wr 2 p0 pma 203 7 0 0xff;serdes wr 2 p0 pma 204 

7 0 0xff;serdes wr 2 p0 pma 205 7 0 0x7f;serdes wr 2 p0 pma 205 

7 0 0xff;
opt_ata6=serdes wr 2 p1 pma 201 7 0 0xFC;serdes wr 2 p1 pma 202 

7 0 0xff;serdes wr 2 p1 pma 203 7 0 0xff;serdes wr 2 p1 pma 204 

7 0 0xff;serdes wr 2 p1 pma 205 7 0 0x7f;serdes wr 2 p1 pma 205 

7 0 0xff;
opt_ata7=serdes wr 2 p2 pma 201 7 0 0xFC;serdes wr 2 p2 pma 202 

7 0 0xff;serdes wr 2 p2 pma 203 7 0 0xff;serdes wr 2 p2 pma 204 

7 0 0xff;serdes wr 2 p2 pma 205 7 0 0x7f;serdes wr 2 p2 pma 205 

7 0 0xff;
opt_ata8=serdes wr 2 p3 pma 201 7 0 0xFC;serdes wr 2 p3 pma 202 

7 0 0xff;serdes wr 2 p3 pma 203 7 0 0xff;serdes wr 2 p3 pma 204 

7 0 0xff;serdes wr 2 p3 pma 205 7 0 0x7f;serdes wr 2 p3 pma 205 

7 0 0xff;
opt_rx=serdes rx_params_set 1 0 00 07 00 00 08 00 08 07 

00;serdes rx_params_set 1 1 00 07 00 00 08 00 08 07 00;serdes 

rx_params_set 1 2 00 07 00 00 08 00 08 07 02;serdes 

rx_params_set 1 3 00 07 00 00 08 00 08 07 02;serdes 

rx_params_set 2 0 00 07 00 00 08 00 08 07 04;serdes 

rx_params_set 2 1 00 07 00 00 08 00 08 07 04;serdes 

rx_params_set 2 2 00 07 00 00 08 00 08 07 04;serdes 

rx_params_set 2 3 00 07 00 00 08 00 08 07 04;
opt_tx=serdes tx_params_set 1 0 1 20 3 0 0;serdes tx_params_set 

1 1 1 20 3 0 0;serdes tx_params_set 1 2 1 22 4 0 0;serdes 

tx_params_set 1 3 1 22 4 0 0;serdes tx_params_set 2 0 3 19 3 0 

0;serdes tx_params_set 2 1 4 20 4 0 0;serdes tx_params_set 2 2 4 

23 5 0 0;serdes tx_params_set 2 3 4 22 6 0 0;
optimize_sata=serdes rx_params_set 1 0  00 07 00 00 08 00 08 07 

10;serdes rx_params_set 1 1  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 1 2  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 1 3  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 2 0  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 2 1  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 2 2  00 07 00 00 08 00 08 07 10;serdes 

rx_params_set 2 3  00 07 00 00 08 00 08 07 10;mw.l 0xFC8000BC  

870e182b;mw.l 0xFC8000BC  870e182b;mw.l 0xFC8000BC  

070e182b;mw.l 0xFC9000BC  870e182b;mw.l 0xFC9000BC  

870e182b;mw.l 0xFC9000BC  070e182b;serdes wr 1 p4 pma 13 4 4 

0;serdes wr 1 p4 pma 15 2 0 2;serdes wr 2 p4 pma 13 4 4 0;serdes 

wr 2 p4 pma 15 2 0 2;serdes tx_params_set 1 0 1 20 4 0 0;serdes 

tx_params_set 1 1 1 20 4 0 0;serdes tx_params_set 1 2 1 20 4 0 

0;serdes tx_params_set 1 3 1 20 4 0 0;serdes tx_params_set 2 0 1 

20 4 0 0;serdes tx_params_set 2 1 1 20 4 0 0;serdes 

tx_params_set 2 2 1 20 4 0 0;serdes tx_params_set 2 3 1 20 4 0 

0;
pld_i2c_addr=57
sata_lot=serdes wr 1 p4 pma 13 4 4 0;serdes wr 1 p4 pma 15 2 0 

0;serdes wr 2 p4 pma 13 4 4 0;serdes wr 2 p4 pma 15 2 0 0;
sata_lot3=serdes wr 1 p4 pma 13 4 4 1;serdes wr 1 p4 pma 15 4 3 

3;serdes wr 2 p4 pma 13 4 4 1;serdes wr 2 p4 pma 15 4 3 3;
serverip=192.168.0.118
soc=alpine
spi_pt_addr_al_boot=0x00020000
spi_pt_addr_dt=0x00080000
spi_pt_addr_env=0x007E0000
spi_pt_addr_fs=0x00370000
spi_pt_addr_kernel=0x00090000
spi_pt_size_al_boot=0x00060000
spi_pt_size_dt=0x00010000
spi_pt_size_env=0x00010000
spi_pt_size_fs=0x00460000
spi_pt_size_kernel=0x002E0000
syno_boot_dev=/dev/md0
syno_bootargs=setenv bootargs console=ttyS0,115200 ip=off 

pci=pcie_bus_perf initrd=$loadaddr_rootfs root=$syno_boot_dev rw 

$syno_extra_args syno_hw_version=$syno_hw_version ihd_num=

$syno_hdd_powerup_seq netif_num=$syno_net_if_num vmalloc=

$syno_vmalloc $ata_hdd_act_led $ata_hdd_detect $ata_hdd_enable
syno_extra_args=HddHotplug=4
syno_hdd_powerup_seq=4
syno_hw_version=DS416
syno_net_if_num=2
upd_dt=setenv tftpfile $file_dt;mw.b $loadaddr 0xFF 

$spi_pt_size_dt; tftpboot $loadaddr $tftpfile; if test $? -eq 0; 

then sf probe; sf erase $spi_pt_addr_dt $spi_pt_size_dt; sf 

write $loadaddr $spi_pt_addr_dt $spi_pt_size_dt; echo "Device 

Tree Update Done";fi;
upd_eeprom=confirm_msg "Perform EEPROM update? [y/n] ";if test 

$? -ne 0; then exit; fi;tftpboot $loadaddr $file_eeprom;if test 

$? -ne 0; then exit; fi;i2c probe ${pld_i2c_addr};if test $? -ne 

0; then exit; fi;i2c write $loadaddr ${pld_i2c_addr} 0.2 

$filesize;if test $? -ne 0; then exit;fi;echo eepromupd done;
upd_flash=setenv tftpfile $file_flash; tftpboot $loadaddr 

$tftpfile; if test $? -eq 0; then echo "This may take a while, 

please be patient..."; sf probe; sf erase 0 +$filesize; sf write 

$loadaddr 0 $filesize; echo "Flash Update Done"; fi;
upd_kernel=setenv tftpfile $file_kernel;mw.b $loadaddr 0xFF 

$spi_pt_size_kernel;tftpboot $loadaddr $tftpfile; if test $? -eq 

0; then sf probe; sf erase $spi_pt_addr_kernel 

$spi_pt_size_kernel; sf write $loadaddr $spi_pt_addr_kernel 

$spi_pt_size_kernel; echo "Kernel Update Done"; fi;
upd_rootfs=setenv tftpfile $file_rootfs;mw.b $loadaddr 0xFF 

$spi_pt_size_rootfs; tftpboot $loadaddr $tftpfile;if test $? -eq 

0; then sf probe; sf erase $spi_pt_addr_fs +$filesize; sf write 

$loadaddr $spi_pt_addr_fs $filesize;echo "Rootfs Update 

Done";fi;
upd_uboot=setenv tftpfile $file_uboot;tftpboot $loadaddr 

$tftpfile; if test $? -eq 0; then sf probe; sf erase 0 +

$filesize; sf write $loadaddr 0 $filesize; echo "Uboot Update 

Done"; fi;
vendor=annapurna-labs

Environment size: 7671/16380 bytes
ALPINE_DB>


==========
moderator edit: please use code tags to post log. It's impossible to read a large log without it.



Edited 1 time(s). Last edit at 03/04/2021 11:24PM by bodhi.
VectraT
Re: Synology Diskstation DS414 Unbricking
March 04, 2021 02:04AM
after boot command:

DiskStation> reboot
The system is going down NOW!
Sent SIGTERM to all processes
Terminated
Unmounting /sys[  191.094710] VFS: opened file in mnt_point: 

(/dev), file: (/ttyS1)
/kernel/debug ...
Unmounting /sys ...
Unmounting /dev/pts ...
Unmounting /dev ...
Failed to umount /dev, 16
Unmounting /tmp ...
Unmounting / ...
All file systems unmounted.
rmmod usb_stora[  194.114274] usbcore: deregistering interface 

driver usb-storage
ge
Requesting system reboot
[  198.144538] Restarting system.
[  198.147587] Synology restart
Annapurna Labs stage 2: stage2_eth3_ram_loader v1.49.3
Executing next!
Annapurna Labs stage 2: stage2.5_loader v1.49.3
SPD I2C Address:00000057
Executing next!


Stage 3 2013.10-alpine_spl-1.49.4-00666-gccfe35f (Sep 08 2014 - 

09:15:21)

DRAM:  1 GiB
EEPROM Revision ID = 34
Device ID = a212
Device Info: AL21200-1400
!!! board.c:2014
Loading DT to 00100000 (17059 bytes)...
Board config ID: Synology DS416
SRAM agent up: agent_wakeup v1.49.3
Loading U-Boot to 00100000 (373616 bytes)...
Executing U-Boot...


U-Boot 2013.10-alpine_db-1.49.4-SYNO-768e80b-2016-01-04 (Jan 04 

2016 - 18:44:17)

Annapurna Labs
Board: Alpine Development Board
I2C:   ready
DDR size is 1024 MB according to shared params
DRAM:  1 GiB

   _
  /_\  _ __  _ __   __ _ _ __  _   _ _ __ _ __   __ _
 //_\\| '_ \| '_ \ / _` | '_ \| | | | '__| '_ \ / _` |
/  _  \ | | | | | | (_| | |_) | |_| | |  | | | | (_| |
\_/ \_/_| |_|_| |_|\__,_| .__/ \__,_|_|  |_| |_|\__,_|
   __       _           |_|
  / /  __ _| |__  ___
 / /  / _` | '_ \/ __|
/ /__| (_| | |_) \__ \
\____/\__,_|_.__/|___/
               ___             _
 /\ /\        / __\ ___   ___ | |_
/ / \ \_____ /__\/// _ \ / _ \| __|
\ \_/ /_____/ \/  \ (_) | (_) | |_
 \___/      \_____/\___/ \___/ \__|

CPU DevID = 0, rev_id = 1
eeprom_per_device_init: no valid information found!
power_init_board: EEPROM per device information is not valid - 

using defaults!
Zero device ID! Base=0xFBFF5AE0
Early init addr = 00000400
Early init DT offset = 00080000
SF: Detected MX25U6435F with page size 256 Bytes, erase size 64 

KiB, total 8 MiB
U-Boot script not found in TOC!
U-Boot redundant environment not found in TOC!
DT info:
--------------------
Board config ID: Synology DS416
Muxed interfaces:
        if_uart_1(0)
GPIO configuration:
        GPIO 0 is input
        GPIO 1 is input
        GPIO 2 is input
        GPIO 3 is input
        GPIO 35 is input
        GPIO 36 is input
        GPIO 5 is output, value = 1
        GPIO 10 is output, value = 0
        GPIO 11 is output, value = 0
        GPIO 19 is output, value = 0
        GPIO 22 is output, value = 0
        GPIO 23 is output, value = 0
        GPIO 24 is output, value = 0
        GPIO 25 is output, value = 0
        GPIO 26 is output, value = 0
        GPIO 27 is output, value = 0
        GPIO 29 is output, value = 0
        GPIO 31 is output, value = 0
        GPIO 32 is output, value = 0
        GPIO 33 is output, value = 0
        GPIO 38 is output, value = 0
        GPIO 39 is output, value = 0
        GPIO 40 is output, value = 0
        GPIO 41 is output, value = 0
        GPIO 43 is output, value = 0
dt_based_init_gpio: GPIO  0: 1
dt_based_init_gpio: GPIO  1: 1
dt_based_init_gpio: GPIO  2: 1
dt_based_init_gpio: GPIO  3: 1
dt_based_init_gpio: GPIO  4: 1
dt_based_init_gpio: GPIO  5: 1
dt_based_init_gpio: GPIO  6: 1
dt_based_init_gpio: GPIO  7: 1
dt_based_init_gpio: GPIO  8: 0
dt_based_init_gpio: GPIO  9: 0
dt_based_init_gpio: GPIO 10: 0
dt_based_init_gpio: GPIO 11: 0
dt_based_init_gpio: GPIO 12: 1
dt_based_init_gpio: GPIO 13: 1
dt_based_init_gpio: GPIO 14: 1
dt_based_init_gpio: GPIO 15: 1
dt_based_init_gpio: GPIO 16: 1
dt_based_init_gpio: GPIO 17: 0
dt_based_init_gpio: GPIO 18: 1
dt_based_init_gpio: GPIO 19: 0
dt_based_init_gpio: GPIO 20: 0
dt_based_init_gpio: GPIO 21: 0
dt_based_init_gpio: GPIO 22: 0
dt_based_init_gpio: GPIO 23: 0
dt_based_init_gpio: GPIO 24: 0
dt_based_init_gpio: GPIO 25: 0
dt_based_init_gpio: GPIO 26: 0
dt_based_init_gpio: GPIO 27: 0
dt_based_init_gpio: GPIO 28: 1
dt_based_init_gpio: GPIO 29: 0
dt_based_init_gpio: GPIO 30: 1
dt_based_init_gpio: GPIO 31: 0
dt_based_init_gpio: GPIO 32: 0
dt_based_init_gpio: GPIO 33: 0
dt_based_init_gpio: GPIO 34: 1
dt_based_init_gpio: GPIO 35: 1
dt_based_init_gpio: GPIO 36: 1
dt_based_init_gpio: GPIO 37: 1
dt_based_init_gpio: GPIO 38: 0
dt_based_init_gpio: GPIO 39: 0
dt_based_init_gpio: GPIO 40: 0
dt_based_init_gpio: GPIO 41: 0
dt_based_init_gpio: GPIO 42: 1
dt_based_init_gpio: GPIO 43: 0
dt_based_init_gpio: GPIO 44: 1
dt_based_init_gpio: GPIO 45: 1
dt_based_init_gpio: GPIO 46: 1
dt_based_init_gpio: GPIO 47: 1
Ethernet port 0:
        mode: sgmii
        SFP module: N/A
        10gbe params: N/A
        PHY address: 1
        i2c-id: N/A
Ethernet port 1:
        mode: sgmii
        SFP module: N/A
        10gbe params: N/A
        PHY address: 2
        i2c-id: N/A
Ethernet port 2:
        mode: sgmii
        SFP module: N/A
        10gbe params: N/A
        PHY address: 3
        i2c-id: N/A
Ethernet port 3:
        mode: sgmii
        SFP module: N/A
        10gbe params: N/A
        PHY address: 0
        i2c-id: N/A
PCIe endpoint ports:
PCIe port 0:
        PCIe port status: enabled
        Gen: 2
        Width: 2
PCIe port 1:
        PCIe port status: enabled
        Gen: 2
        Width: 2
PCIe port 2:
        PCIe port status: disabled
        Gen: 2
        Width: 4
NAND:  0 MiB
SF: Detected MX25U6435F with page size 256 Bytes, erase size 64 

KiB, total 8 MiB
  00:01.0     - 1c36:0001 - Network controller
  00:05.0     - 1c36:0021 - Base system peripheral
pci_init_board_external: PCIE_0 no link found
pci_init_board_external: PCIE_1 no link found
In:    serial
Out:   serial
Err:   serial

Synology Model: DS416
Fan Status: Not Good
Fan 1: Not Good
Fan 2: Not Good

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


   Bootstraps / DT / Capabilities Mismatch!


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Net:
Turn off EEE of rl8211D
Disable eth0 green mode
Turn off EEE of rl8211D
Disable eth1 green mode
, al_eth1
Press Ctrl+C to abort autoboot in 3 second
## Booting kernel from Legacy Image at 08000000 ...
   Image Name:   Linux-3.10.105
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2444744 Bytes = 2.3 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 07500000 ...
   Image Name:   synology_alpine4k_ds416 25554
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    3652409 Bytes = 3.5 MiB
   Load Address: 08000000
   Entry Point:  08000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 03b84008
   Booting using the fdt blob at 0x3b84008
   Loading Kernel Image ... OK
   reserving fdt memory region: addr=0 size=100000
   Loading Ramdisk to 03807000, end 03b82b39 ... OK
   Loading Device Tree to 037ff000, end 038062a2 ... OK
ft_board_setup_clock: setting /soc/clocks/refclk.clock-frequency 

to 100000000 Hz
ft_board_setup_clock: setting /soc/clocks/sbclk.clock-frequency 

to 375000000 Hz
ft_board_setup_clock: setting /soc/clocks/nbclk.clock-frequency 

to 800000000 Hz
ft_board_setup_clock: setting /soc/arch-timer.clock-frequency to 

50000000 Hz
ft_board_setup_clock: setting /cpus/cpu@0.clock-frequency to 

1500000000 Hz
ft_board_setup_clock: setting /cpus/cpu@1.clock-frequency to 

1500000000 Hz
ft_board_setup_clock: setting /cpus/cpu@2.clock-frequency to 

1500000000 Hz
ft_board_setup_clock: setting /cpus/cpu@3.clock-frequency to 

1500000000 Hz
ft_board_setup_clock: setting /soc/clocks/cpuclk.clock-frequency 

to 1500000000 Hz
ft_board_setup_clock: setting /soc/uart0.clock-frequency to 

375000000 Hz
ft_board_setup_clock: setting /soc/uart1.clock-frequency to 

375000000 Hz
ft_board_setup_clock: setting /soc/uart2.clock-frequency to 

375000000 Hz
ft_board_setup_clock: setting /soc/uart3.clock-frequency to 

375000000 Hz
ft_board_setup_feature_disable: setting /soc/pcie-

external0.status to disabled
ft_board_setup_feature_disable: setting /soc/pcie-

external1.status to disabled
ft_board_setup_feature_disable: setting /soc/pcie-

external2.status to disabled
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I/O CC forced to 1!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ft_board_setup_prop_u32_set: setting /soc/ccu.io_coherency to 1

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
?¢*6.2-
Tue Jan  4 20:10:53 2000

DiskStation login:

========
moderator edit: code tags



Edited 1 time(s). Last edit at 03/04/2021 11:25PM by bodhi.
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: