I was wrong: installed uboot on B04

Hi,

I used the command --force, but my pogo is pro and not pink v2, so i have now a bricked pogoplug .
I bought the cable C-42, so I have a serial connection. Befor installing,
i made backups with

# nanddump -nof mtd0.backup /dev/mtd0
# nanddump -nf mtd0.backup.oob

Using the boot sata: i used these commands:

flash_erase /dev/mtd0 0 4
nandwrite /dev/mtd0 mtd0.backup
reboot

The Pogoplug does not start. With serial connection i see this in terminal

# screen /dev/ttyUSB0 115200 8N1
Reading NAND, Image 0
Uncorrectable error(s) encountered in page with starting address 0x00040000.

Uncorrectable error(s) encountered in page with starting address 0x00040000.

Hdr len: 0xA1A2A3A4
Hdr CRC: 0xB1B2B3B4
read failed
Reading NAND, Image 1
Uncorrectable error(s) encountered in page with starting address 0x00100000.

Uncorrectable error(s) encountered in page with starting address 0x00100000.

Hdr len: 0xA1A2A3A4
Hdr CRC: 0xB1B2B3B4
read failed
Reading NAND, Image 0
Uncorrectable error(s) encountered in page with starting address 0x00040000.

Is it possible to reset the nand correctly. ? :S

Thanks



Edited 1 time(s). Last edit at 01/26/2013 10:18AM by zampara.

zampara,

I think it's best that this question to be answered by WarheadSse! or you can ask at Arch forum:
http://archlinuxarm.org/forum/viewforum.php?f=29

Worse case, you can boot from SATA and bypass NAND altogether.

- bodhi