[DS215j] LAN down, kernel is booting. Ideas? March 26, 2021 10:59AM |
Registered: 3 years ago Posts: 1 |
Quote
rsaffi
Got this DS215j on a recent deal. It came without disks and I simply put two disks (2 x Samsung 850 Pro SSDs) in it and tried to get started by doing a system reset via the Reset Button. The SSDs are just for testing something, the idea is that later this unit receives 2 x 2TB NAS HDDs.
So, I've tried all possible ways and can't find the device on my network (Neither Synology Assistant nor find.synology.com). Tried plugging on my router, tried plugging directly to computer. Tried at least 4 different ethernet cables (which are working with other devices).
I've also tried doing the reset, both Mode 1 and Mode 2. My problem with Mode 2 is that it will not emit the 3-beeps that it is supposed to on the second time I press and hold the Reset button for 4 seconds; it only beeps once. So apparently I never really did the Mode 2 reset...
The system seem to be booting perfectly: it seems to have initialized both SSDs (initial orange lights for both disks turn to steady green after some time) and after it boots up it stops blinking the power light and beeps once, as per Synology's documentation on a normal boot. The "Status" light keeps flashing orange, which is understandable given that DSM isn't installed; hence me trying to find the device on the network via Synology Assistant, so I can install the OS.
I've gone through the help section and did everything that is suggested there, but I simply can't find the NAS. I know that even though DS215j has status lights on the ethernet port itself, according to Synology's docs they won't light up, and one should rather rely on the LAN LED on the front of the unit (which never lit up through all my tries).
I even tried debugging this by connecting it directly to my Linux system and running a `tcpdump` on the ethernet port to see if I could see any traffic (or even noise, for that matter) on the network, but I simply got nothing coming from the Synology to my machine, just the other way around.
What else can I do? Ideas on why the Mode 2 reset doesn't work for me? I'm following Synology's docs to the letter, to no success. I think if I can get that to work I will be able to effectively detect it on the network and proceed with reinstalling DSM.
And what if the ethernet port is indeed gone, even though the device seems to be booting up correctly, is there anything I can do or should I consider this a dead end?
BootROM - 1.51 Booting from SPI flash General initialization - Version: 1.0.0 High speed PHY - Version: 0.1.1 (COM-PHY-V20) USB2 UTMI PHY initialized succesfully USB2 UTMI PHY initialized succesfully High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.1 TWSI Read failed Error reading from TWSI DDR3 Training Sequence - Run with PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-g5d1ab78 (Oct 27 2015 - 11:38:34) Marvell version: 2014_T2.0p3 mvBoardTwsiGet: Twsi Read fail mvBoardIoExpValSet: Error: Read from IO Expander failed Board: SYNO-DS215j SoC: MV88F6720 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 800 [MHz] L2 @ 400 [MHz] TClock @ 200 [MHz] DDR @ 534 [MHz] DDR 16Bit Width, FastPath Memory Access, DLB Enabled DRAM: 512 MiB Map: Code: 0x1fed2000:0x1ff93080 BSS: 0x1ffefe10 Stack: 0x1f9c1f20 Heap: 0x1f9c2000:0x1fed2000 MMC: MRVL_MMC: 0 SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB2.0 1: Device Mode USB3.0 0: Host Mode Board configuration detected: RGMII0 Module on MAC0 PON ETH SERDES on MAC1 [SFP] SERDES configuration: Lane #0: PCIe0 Lane #1: SATA1 Lane #2: SATA0 Lane #3: USB3 Synology Model: DS215j Fan Status: Good Net: egiga0, egiga1 [PRIME] syno: network status self-checking Using egiga1 device ## Warning: gatewayip needed but not set ## Warning: gatewayip needed but not set ping failed; host 192.168.27.90 is not alive SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB Erasing SPI flash....Writing to SPI flash.....done syno: reset for network status BootROM - 1.51 Booting from SPI flash General initialization - Version: 1.0.0 High speed PHY - Version: 0.1.1 (COM-PHY-V20) USB2 UTMI PHY initialized succesfully USB2 UTMI PHY initialized succesfully High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.1 TWSI Read failed Error reading from TWSI DDR3 Training Sequence - Run with PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-g5d1ab78 (Oct 27 2015 - 11:38:34) Marvell version: 2014_T2.0p3 mvBoardTwsiGet: Twsi Read fail mvBoardIoExpValSet: Error: Read from IO Expander failed Board: SYNO-DS215j SoC: MV88F6720 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 800 [MHz] L2 @ 400 [MHz] TClock @ 200 [MHz] DDR @ 534 [MHz] DDR 16Bit Width, FastPath Memory Access, DLB Enabled DRAM: 512 MiB Map: Code: 0x1fed2000:0x1ff93080 BSS: 0x1ffefe10 Stack: 0x1f9c1f20 Heap: 0x1f9c2000:0x1fed2000 MMC: MRVL_MMC: 0 SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB2.0 1: Device Mode USB3.0 0: Host Mode Board configuration detected: RGMII0 Module on MAC0 PON ETH SERDES on MAC1 [SFP] SERDES configuration: Lane #0: PCIe0 Lane #1: SATA1 Lane #2: SATA0 Lane #3: USB3 Synology Model: DS215j Fan Status: Good Net: egiga0, egiga1 [PRIME] syno: network status self-checking Using egiga1 device ## Warning: gatewayip needed but not set ## Warning: gatewayip needed but not set ping failed; host 192.168.27.90 is not alive SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB Erasing SPI flash....Writing to SPI flash.....done syno: reset for network status BootROM - 1.51 Booting from SPI flash General initialization - Version: 1.0.0 High speed PHY - Version: 0.1.1 (COM-PHY-V20) USB2 UTMI PHY initialized succesfully USB2 UTMI PHY initialized succesfully High speed PHY - Ended Successfully DDR3 Training Sequence - Ver 5.7.1 TWSI Read failed Error reading from TWSI DDR3 Training Sequence - Run with PBS. DDR3 Training Sequence - Ended Successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-g5d1ab78 (Oct 27 2015 - 11:38:34) Marvell version: 2014_T2.0p3 mvBoardTwsiGet: Twsi Read fail mvBoardIoExpValSet: Error: Read from IO Expander failed Board: SYNO-DS215j SoC: MV88F6720 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 800 [MHz] L2 @ 400 [MHz] TClock @ 200 [MHz] DDR @ 534 [MHz] DDR 16Bit Width, FastPath Memory Access, DLB Enabled DRAM: 512 MiB Map: Code: 0x1fed2000:0x1ff93080 BSS: 0x1ffefe10 Stack: 0x1f9c1f20 Heap: 0x1f9c2000:0x1fed2000 MMC: MRVL_MMC: 0 SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB PCI-e 0: Detected No Link. USB2.0 0: Host Mode USB2.0 1: Device Mode USB3.0 0: Host Mode Board configuration detected: RGMII0 Module on MAC0 PON ETH SERDES on MAC1 [SFP] SERDES configuration: Lane #0: PCIe0 Lane #1: SATA1 Lane #2: SATA0 Lane #3: USB3 Synology Model: DS215j Fan Status: Good Net: egiga0, egiga1 [PRIME] syno: network status self-checking Using egiga1 device ## Warning: gatewayip needed but not set ## Warning: gatewayip needed but not set ping failed; host 192.168.27.90 is not alive skip auto reset...... SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB Erasing SPI flash....Writing to SPI flash.....done Press Ctrl+C to abort autoboot in 3 second Marvell>>
TWSI Read failed Error reading from TWSI
mvBoardTwsiGet: Twsi Read fail mvBoardIoExpValSet: Error: Read from IO Expander failed
Net: egiga0, egiga1 [PRIME] syno: network status self-checking Using egiga1 device ## Warning: gatewayip needed but not set ## Warning: gatewayip needed but not set ping failed; host 192.168.27.90 is not aliveI have no idea where that `192.168.27.90` came from. Maybe an address from the previous owner's LAN?
Marvell>> help ? - alias for 'help' Creset - Creset - Run 'reset' or boot command in a loop, while counting. SatR - Sample At Reset sub-system WOLTest - WOLTest - Wake On Lan u-boot testing active_units- print active units on board base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' boot_menu- command allows to select boot script from boot device example: boot_menu bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol bootvx - Boot vxWorks from an ELF image bootz - boot Linux zImage image from memory bubt - bubt - Burn an image on the Boot SPI Flash. chpart - change active partition cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation date - get/set/reset date & time ddrPhyRead- ddrPhyRead - Read DDR PHY register ddrPhyWrite- ddrPhyWrite - Write DDR PHY register dhcp - boot image via network using DHCP/TFTP protocol diskboot- diskboot- boot from IDE device dma - dma - Perform DMA using the XOR engine echo - echo args to console editenv - edit environment variable eeprom - EEPROM sub-system env - environment handling commands exit - exit script ext2load- load binary file from a Ext2 filesystem ext2ls - list files in a directory (default /) ext4load- load binary file from a Ext4 filesystem ext4ls - list files in a directory (default /) ext4write- create a file in the root directory false - do nothing, unsuccessfully fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fdt - flattened device tree utility commands fsinfo - print information about filesystems fsload - load binary file from a filesystem image go - start application at address 'addr' help - print command description/usage i2c - I2C sub-system ide - ide - IDE sub-system iminfo - print header information for application image imxtract- extract a part of a multi-image ir - ir - reading and changing MV internal register values. itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loadx - load binary file over serial line (xmodem mode) loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range ls - list files in a directory (default /) map - map - Display address decode windows md - memory display me - me - PCIe master enable mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - display MMC info mp - mp - map PCIe BAR mtdparts- define flash/nand partitions mtest - simple RAM read/write test mw - memory write (fill) nfs - boot image via network using NFS protocol nm - memory modify (constant address) pci - list and access PCI Configuration Space pciePhyRead- phyRead - Read PCI-E Phy register pciePhyWrite- pciePhyWrite - Write PCI-E Phy register phyRead - phyRead - Read Phy register phyWrite- phyWrite - Write Phy register ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables pxe - commands to get and boot from pxe files rcvr - rcvr - Start recovery process (with TFTP server) reset - Perform RESET of the CPU resetenv- resetenv - Erase environment sector to reset all variables to default. run - run commands in an environment variable saveenv - save environment variables to persistent storage scsi - SCSI sub-system scsiboot- boot from SCSI device se - se - PCIe Slave enable setenv - set environment variables sf - SPI flash sub-system sg - sg - scanning the PHYs status showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory sp - scan and detect all devices on PCI-e interface sspi - SPI utility command stage_boot- command to load script/image from different devices example: stage_boot hd_img pxe syno_pwoff- syno_pwoff - bring the system down sys_restore- sys_restore - Search for install script on USB DOK and start installation of linux kernel and rootfs. sysboot - command to get and boot from syslinux files temp - temp - Display the device temperature. tempCmd0- tempCmd - This command allocated for monitor extinction tempCmd1- tempCmd - This command allocated for monitor extinction tempCmd2- tempCmd - This command allocated for monitor extinction tempCmd3- tempCmd - This command allocated for monitor extinction test - minimal test like /bin/sh tftpboot- boot image via network using TFTP protocol training- training - prints the results of the DDR3 Training. true - do nothing, successfully ts_report- ts_report - report touch screen coordinate ts_test - ts_test - test touch screen ubi - ubi commands ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifsumount- unmount UBIFS volume usb - USB sub-system usbboot - boot from USB device version - print monitor, compiler and linker version whoAmI - - reading CPU ID
Marvell>> printenv CASset=max MALLOC_len=5 MPmode=SMP autoload=no baudrate=115200 boot_order=hd_scr usb_scr mmc_scr hd_img usb_img mmc_img pxe net_img net_scr bootargs= bootargs_dflt=$console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel bootargs_end=:10.4.50.254:255.255.255.0:Armada375:eth0:none bootargs_root=root=/dev/nfs rw bootcmd=run syno_bootargs; run bootspi bootcmd_auto=stage_boot $boot_order bootcmd_fdt=tftpboot 0x2000000 $image_name;tftpboot $fdtaddr $fdtfile;setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_boot=tftpboot 0x2000000 $image_name; setenv bootargs $console $nandEcc $mtdparts $bootargs_root nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip$bootargs_end $mvNetConfig video=dovefb:lcd0:$lcd0_params clcd.lcd0_enable=$lcd0_enable clcd.lcd_panel=$lcd_panel; bootz 0x2000000 - $fdtaddr; bootcmd_fdt_edit=tftpboot $fdtaddr $fdtfile; fdt addr $fdtaddr; setenv bootcmd $bootcmd_fdt_boot bootcmd_lgcy=tftpboot 0x2000000 $image_name; setenv bootargs $bootargs_dflt; bootm 0x2000000; bootdelay=3 bootspi=sf probe 0 50000000;sf read $loadaddr_kernel $spi_pt_addr_kernel $spi_pt_size_kernel;sf read $loadaddr_rootfs $spi_pt_addr_fs $spi_pt_size_fs;bootm 0x2000000 0x8000000; cacheShare=no console=console=ttyS0,115200 device_partition=0:1 disL2Cache=yes disL2Prefetch=yes disaMvPnp=no eeeEnable=no enaClockGating=no enaCpuStream=no enaDCPref=yes enaFPU=yes enaICPref=yes enaMonExt=no enaWrAllo=no eth1addr=00:50:43:00:02:02 eth1mtu=1500 eth2addr=00:50:43:00:00:02 eth2mtu=1500 eth3addr=00:50:43:02:00:00 eth3mtu=1500 ethact=egiga1 ethaddr=00:50:43:00:02:02 ethmtu=1500 ethprime=egiga1 fdt_addr=2040000 fdt_skip_update=no fdtaddr=0x1000000 fdtfile=armada-375-db.dtb ide_path=/ image_name=uImage initrd_name=uInitrd ipaddr=10.4.50.120 kernel_addr_r=2080000 lcd0_enable=0 lcd0_params=640x480-16@60 lcd_panel=0 loadaddr=0x02000000 loadaddr_kernel=0x2000000 loadaddr_rootfs=0x8000000 loads_echo=0 mtdids=spi0=spi_flash mtdparts=mtdparts=spi_flash:4m(boot),-(spi-rootfs) mvNetConfig=mv_net_config=4,(00:50:43:11:11:11,0:1:2:3),mtu=1500 mv_pon_addr=00:50:43:02:00:00 netbsd_en=no netmask=255.255.255.0 netretry=no pcieTune=no pexMode=RC pxe_files_load=:default.arm-armadaxp-db:default.arm-armadaxp:default.arm pxefile_addr_r=3100000 ramdisk_addr_r=2880000 rootpath=/srv/nfs/ sata_delay_reset=0 sata_dma_mode=yes script_addr_r=3000000 script_name=boot.scr serverip=10.4.50.1 setL2CacheWT=no spi_pt_addr_fs=0x03C0000 spi_pt_addr_kernel=0x00F0000 spi_pt_size_fs=0x0410000 spi_pt_size_kernel=0x02D0000 standalone=fsload 0x2000000 $image_name;setenv bootargs $console $nandEcc $mtdparts root=/dev/mtdblock0 rw ip=$ipaddr:$serverip$bootargs_end; bootm 0x2000000; stderr=serial stdin=serial stdout=serial syno_boot_dev=/dev/md0 syno_bootargs=setenv bootargs console=ttyS0,115200 ip=off initrd=$loadaddr_rootfs root=$syno_boot_dev rw $syno_extra_args syno_hw_version=$syno_hw_version hd_power_on_seq=$syno_hdd_powerup_seq ihd_num=$syno_hdd_powerup_seq netif_num=$syno_net_if_num flash_size="8" syno_extra_args= syno_hdd_powerup_seq=2 syno_hw_version=DS215jv10 syno_net_if_num=1 syno_reset=0 usb0Mode=host usbActive=0 usbType=3 vxworks_en=no yuk_ethaddr=00:00:00:EE:51:81 Environment size: 3714/65532 bytes
Marvell>> boot SF: Detected MX25L6405D with page size 64 KiB, total 8 MiB ## Booting kernel from Legacy Image at 02000000 ... Image Name: Linux-3.2.40 Created: 2018-05-18 20:49:02 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2195432 Bytes = 2.1 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 08000000 ... Image Name: synology_armada375_ds215j 15284 Created: 2018-05-19 1:24:44 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3699129 Bytes = 3.5 MiB Load Address: 08000000 Entry Point: 08000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Lin done, booting th[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.2.40 (root@build4) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15284 SMP Sat May 19 04:48:54 CST 2018 [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Marvell Armada-375 Board [ 0.000000] Using UBoot passing parameters structure [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] PERCPU: Embedded 7 pages/cpu @80a2e000 s5440 r8192 d15040 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x8000000 root=/dev/md0 rw syno_hw_version=DS215jv10 hd_power_on_seq=2 ihd_num=2 netif_num=1 flash_size=8 [ 0.000000] Synology Hardware Version: DS215jv10-j [ 0.000000] Internal HD num: 2 [ 0.000000] Internal netif num: 1 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 509788k/509788k available, 14500k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xa0800000 - 0xf4000000 (1336 MB) [ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB) [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) [ 0.000000] .text : 0x80008000 - 0x80550000 (5408 kB) [ 0.000000] .init : 0x80550000 - 0x80581540 ( 198 kB) [ 0.000000] .data : 0x80582000 - 0x805bb400 ( 229 kB) [ 0.000000] .bss : 0x805bb424 - 0x8062950c ( 441 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:528 [ 0.000000] Initializing Armada-375 SoC Timers [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms [ 0.000169] Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816) [ 0.090040] pid_max: default: 32768 minimum: 301 [ 0.090176] Security Framework initialized [ 0.090204] AppArmor: AppArmor initialized [ 0.090269] Mount-cache hash table entries: 512 [ 0.090926] CPU: Testing write buffer coherency: ok [ 0.091068] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.091095] Calibrating local timer... 399.84MHz. [ 0.151009] CPU1: Booted secondary processor [ 0.190036] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.190093] Brought up 2 CPUs [ 0.190108] SMP: Total of 2 processors activated (3188.32 BogoMIPS). [ 0.190814] devtmpfs: initialized [ 0.199833] xor: measuring software checksum speed [ 0.240011] arm4regs : 1422.400 MB/sec [ 0.289991] 8regs : 999.200 MB/sec [ 0.339969] 32regs : 940.400 MB/sec [ 0.339978] xor: using function: arm4regs (1422.400 MB/sec) [ 0.340178] NET: Registered protocol family 16 [ 0.350056] mvBoardTwsiGet: Twsi Read fail [ 0.350067] mvBoardIoExpValSet: Error: Read from IO Expander failed [ 0.350088] L310 cache controller enabled [ 0.350098] l2x0: 8 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x02440000, Cache size: 262144 B [ 0.351707] [ 0.351713] CPU Interface [ 0.351718] ------------- [ 0.351723] SDRAM_CS0 ....base 000000000, size 512MB [ 0.351740] SDRAM_CS1 ....disable [ 0.351748] SDRAM_CS2 ....disable [ 0.351755] SDRAM_CS3 ....disable [ 0.351763] DEVICE_CS0 ....base 0f4000000, size 1MB [ 0.351781] DEVICE_CS1 ....no such [ 0.351800] DEVICE_CS2 ....no such [ 0.351819] DEVICE_CS3 ....no such [ 0.351837] PEX0_MEM ....base 0e0000000, size 16MB [ 0.351851] PEX0_IO ....base 0f1100000, size 1MB [ 0.351865] PEX1_MEM ....base 0e2000000, size 16MB [ 0.351880] PEX1_IO ....base 0f1200000, size 1MB [ 0.351894] INTER_REGS ....base 0f1000000, size 1MB [ 0.351907] DMA_UART ....no such [ 0.351926] SPI_CS0 ....base 0f0000000, size 16MB [ 0.351943] SPI_CS1 ....no such [ 0.351962] SPI_CS2 ....no such [ 0.351980] SPI_CS3 ....no such [ 0.351999] SPI_CS4 ....no such [ 0.352017] SPI_CS5 ....no such [ 0.352035] SPI_CS6 ....no such [ 0.352054] SPI_CS7 ....no such [ 0.352072] BOOT_ROM_CS ....no such [ 0.352091] DEV_BOOTCS ....base 0f2000000, size 32MB [ 0.352108] USB3 ....no such [ 0.352126] CRYPT0_ENG ....base 0f4400000, size 64KB [ 0.352144] CRYPT1_ENG ....base 0f4480000, size 64KB [ 0.352159] PP2 - CPU 0 ....no such [ 0.352178] PP2 - CPU 1 ....no such [ 0.352197] [ 0.352199] Marvell Armada-375 [ 0.352206] SYNO-DS215j Board - [ 0.352214] Soc: MV88F6720 Rev A0 [ 0.352219] LE [ 0.352224] LSP version: linux-3.2.58-2014_T2.0p2 [ 0.352230] IOCC: Support IO coherency. [ 0.352235] -> Sync Barrier WA enabled [ 0.352241] [ 0.353742] USB3 XHCI Device registered successfully [ 0.353753] Initialising USB2-1 HAL [ 0.354088] Registered Marvell USB2 EHCI host controller 1 [ 0.354097] Initialising USB2-0 HAL [ 0.354421] Registered Marvell USB2 EHCI host controller 0 [ 0.354430] -----> 0x18400 = 0x1040 [ 0.354641] Synology Armada375 2-bay GPIO Init [ 0.363277] bio: create slab <bio-0> at 0 [ 0.530434] raid6: int32x1 114 MB/s [ 0.700060] raid6: int32x2 153 MB/s [ 0.870002] raid6: int32x4 164 MB/s [ 1.039858] raid6: int32x8 182 MB/s [ 1.039867] raid6: using algorithm int32x8 (182 MB/s) [ 1.040516] SCSI subsystem initialized [ 1.041917] Switching to clocksource a375_clocksource [ 1.042336] AppArmor: AppArmor Filesystem Enabled [ 1.044389] NET: Registered protocol family 2 [ 1.044532] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 1.044830] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.045073] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 1.045309] TCP: Hash tables configured (established 16384 bind 16384) [ 1.045318] TCP reno registered [ 1.045328] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 1.045351] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 1.045561] NET: Registered protocol family 1 [ 1.045811] RPC: Registered named UNIX socket transport module. [ 1.045821] RPC: Registered udp transport module. [ 1.045828] RPC: Registered tcp transport module. [ 1.045835] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.046035] Trying to unpack rootfs image as initramfs... [ 3.508839] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 3.520570] Freeing initrd memory: 3612K [ 3.520665] PCIe: Checking physical bus #0: [ 3.520672] no link, disabled [ 3.520678] PCIe: Checking physical bus #1: [ 3.520684] no link, disabled [ 3.521327] Armada 375 hwmon thermal sensor initialized. [ 3.522592] o PPv2.1 Giga driver [ 3.522602] o 4 Giga ports supported [ 3.522608] o SKB recycle supported (Enabled) [ 3.522615] o BM supported for CPU: 8 BM pools [ 3.522621] o HWF supported [ 3.522627] o RX Queue support: 8 Queues * 512 Descriptors [ 3.522636] o TX Queue support: 8 Queues * 1024 Descriptors [ 3.522643] o Driver debug messages enabled [ 3.522648] [ 3.527470] o Loading network interface(s) for port #1: cpu_mask=0x3, mtu=1500 [ 3.528149] o Port 1 is connected to Linux netdevice [ 3.528168] o giga p=1: phy=1, mtu=1500, mac=00:50:43:00:02:02, speed=AutoNeg (platform) [ 3.530859] o eth0, ifindex = 2, GbE port = 1 [ 3.530870] [ 3.530873] o eth0, phy chipid = 1410dd0, Support WOL = 32 [ 3.530887] [ 3.531064] cesadev_init(80558f64) [ 3.532118] audit: initializing netlink socket (disabled) [ 3.532154] type=2000 audit(3.520:1): initialized [ 3.599166] VFS: Disk quotas dquot_6.5.2 [ 3.599300] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 3.600107] msgmni has been set to 1002 [ 3.600924] async_tx: api initialized (async) [ 3.601141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 3.601155] io scheduler noop registered [ 3.601215] io scheduler cfq registered (default) [ 3.601293] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 3.601335] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 3.638753] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 3.678720] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 3.698721] mv_xor mv_xor.2: Marvell XOR: ( xor ) [ 3.718707] mv_xor mv_xor.3: Marvell XOR: ( fill cpy ) [ 3.801009] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.849172] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A [ 4.648497] console [ttyS0] enabled [ 4.678811] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 45) is a 16550A [ 4.715988] brd: module loaded [ 4.719081] Loading iSCSI transport class v2.0-870. [ 4.725180] sata_mv sata_mv.0: slots 32 ports 2 [ 4.732115] scsi0 : sata_mv [ 4.735421] scsi1 : sata_mv [ 4.738763] ata1: SATA max UDMA/133 irq 58 [ 4.742886] ata2: SATA max UDMA/133 irq 58 [ 11.005939] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.045947] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/133 [ 11.052948] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.115915] ata1.00: configured for UDMA/133 [ 11.135939] scsi 0:0:0:0: Direct-Access Hitachi HTS547575A9E384 JE4O PQ: 0 ANSI: 5 [ 11.145614] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 11.153245] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 11.158660] sd 0:0:0:0: [sda] Write Protect is off [ 11.163547] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.224254] sda: [ 11.226926] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.146369] Delay 5 seconds to wait for disk 2 ready. [ 19.482660] ata2: SATA link down (SStatus 0 SControl F300) [ 19.489488] physmap platform flash device: 00800000 at f0000000 [ 19.496359] physmap-flash physmap-flash.0: map_probe failed [ 19.503313] SPI Serial flash detected @ 0xf0000000, 8192KB (128sec x 64KB) [ 19.510241] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000 [ 19.558443] 6 RedBoot partitions found on MTD device SYNOMTD-0 [ 19.564312] SYNOMTD flash bank 0: Using RedBoot partition definition [ 19.570697] Creating 6 MTD partitions on "SYNOMTD-0": [ 19.575781] 0x000000000000-0x0000000f0000 : "RedBoot" [ 19.582006] 0x0000000f0000-0x0000003c0000 : "zImage" [ 19.588051] 0x0000003c0000-0x0000007d0000 : "rd.gz" [ 19.593968] 0x0000007d0000-0x0000007e0000 : "vendor" [ 19.599054] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 19.605239] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 19.611363] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0. [ 19.617491] vender Mac4 checksum error ucSum:0xa1 Buf:0x3d Sum:161. [ 19.623792] vender Mac5 checksum error ucSum:0x68 Buf:0x4e Sum:360. [ 19.630090] vender Mac6 checksum error ucSum:0x3b Buf:0x2c Sum:315. [ 19.636390] vender Mac7 checksum error ucSum:0x7f Buf:0x33 Sum:383. [ 19.642695] serial number='1550MPN723816' [ 19.647573] 0x0000007e0000-0x0000007f0000 : "RedBoot Config" [ 19.654535] 0x0000007f0000-0x000000800000 : "FIS directory" [ 19.661261] i2c /dev entries driver [ 19.665820] md: linear personality registered for level -1 [ 19.671336] md: raid0 personality registered for level 0 [ 19.676764] md: raid1 personality registered for level 1 [ 19.682103] md: raid10 personality registered for level 10 [ 19.687626] md: raid6 personality registered for level 6 [ 19.692967] md: raid5 personality registered for level 5 [ 19.698304] md: raid4 personality registered for level 4 [ 19.704059] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 19.712543] cpuidle: using governor ladder [ 19.716945] TCP cubic registered [ 19.720196] NET: Registered protocol family 17 [ 19.724710] Registering the dns_resolver key type [ 19.729544] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 19.737851] registered taskstats version 1 [ 19.742513] md: Waiting for all devices to be available before autodetect [ 19.749428] md: If you don't use raid, use raid=noautodetect [ 19.755846] md: Autodetecting RAID arrays. [ 19.759968] md: Scanned 0 and added 0 devices. [ 19.764493] md: autorun ... [ 19.767301] md: ... autorun DONE. [ 19.770745] RAMDISK: lzma image found at block 0 [ 22.426185] VFS: Mounted root (ext2 filesystem) on device 1:0. START /linuxrc.syno Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore[ 22.691153] usbcore: registered new interface driver usbfs [ 22.706158] usbcore: registered new interface driver hub [ 22.721914] usbcore: registered new interface driver ethub [ 22.735229] usbcore: registered new device driver usb ... [ OK ] :: Loading module ehci-hcd[ 22.813365] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 22.820029] ehci_marvell ehci_marvell.0: Marvell Orion EHCI [ 22.825927] ehci_marvell ehci_marvell.0: new USB bus registered, assigned bus number 1 [ 22.861429] ehci_marvell ehci_marvell.0: irq 50, io base 0xfbb54100 [ 22.881376] ehci_marvell ehci_marvell.0: USB 2.0 started, EHCI 1.00 [ 22.888995] hub 1-0:1.0: USB hub found [ 22.892844] hub 1-0:1.0: 1 port detected [ 22.901403] ehci_marvell ehci_marvell.1: Marvell Orion EHCI [ 22.907066] ehci_marvell ehci_marvell.1: new USB bus registered, assigned bus number 2 [ 22.941446] ehci_marvell ehci_marvell.1: irq 49, io base 0xfbb50100 [ 22.961413] ehci_marvell ehci_marvell.1: USB 2.0 started, EHCI 1.00 [ 22.971532] hub 2-0:1.0: USB hub found [ 22.975359] hub 2-0:1.0: 1 port detected ... [ OK ] :: Loading module xhci-hcd[ 23.107346] ## xhci_plat_probe [ 23.110465] xhci-hcd xhci-hcd: xHCI Host Controller [ 23.115514] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 3 [ 23.122911] xhci-hcd xhci-hcd: irq 48, io mem 0xf1058000 [ 23.134081] hub 3-0:1.0: USB hub found [ 23.137892] hub 3-0:1.0: 1 port detected [ 23.146519] xhci-hcd xhci-hcd: xHCI Host Controller [ 23.151501] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 4 [ 23.166457] hub 4-0:1.0: USB hub found [ 23.170277] hub 4-0:1.0: 1 port detected ... [ OK ] [ 23.321274] usb 2-1: new high-speed USB device number 2 using ehci_marvell Insert net driver(Mindspeed only)... [ 23.384826] ds215j_synobios: module license 'Synology Inc.' taints kernel. [ 23.391837] Disabling lock debugging due to kernel taint [ 23.400277] 2000-1-1 0:0:0 UTC [ 23.403462] synobios: load, major number 201 [ 23.407777] Brand: Synology [ 23.410625] Model: DS-215j [ 23.413411] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 23.421941] synobios cpu_arch proc entry initialized [ 23.426940] synobios crypto_hw proc entry initialized [ 23.432026] synobios syno_platform proc entry initialized Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 [ 23.464980] synobios: unload Partition Version=0 Partition layout is not DiskStation style. NOT EXECUTE /sbin/e2fsck. Mounting /dev/md0 /tmpRoot mount: lseek failed, msg:Invalid argument mount: mounting /dev/md0 on /tmpRoot failed: No such device mount /dev/md0 fail, returns Exit on error [3] no init exists... Sat Jan 1 00:00:00 UTC 2000 sys /sys sysfs rw,relatime 0 0 /dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0 none /dev devtmpfs rw,relatime,size=254892k,nr_inodes=63723,mode=755 0 0 proc /proc proc rw,relatime 0 0 linuxrc.syno failed on 3 starting pid 1277, tty '': '/etc/rc' :: Starting /etc/rc :: Mounting procfs ... [ OK ] :: Mounting tmpfs ... [ OK ] :: Mounting devtmpfs ... [ OK ] :: Mounting devpts ... [ OK ] :: Mounting sysfs ... [ OK ] mdadm: error opening /dev/md1: No such file or directory rc: Use all internal disk as swap. swapon: can't stat '/dev/md1': No such file or directory :: Loading module fat ... [ OK ] :: Loading module vfat ... [ OK ] :: Mounting usbfs ... [ OK ] :: Loading module synobios[ 24.814037] 2000-1-1 0:0:0 UTC [ 24.817115] synobios: load, major number 201 [ 24.821474] Brand: Synology [ 24.824307] Model: DS-215j [ 24.827039] This is default settings: set group disks wakeup number to 1, spinup time deno 1 [ 24.835547] synobios cpu_arch proc entry initialized [ 24.840537] synobios crypto_hw proc entry initialized [ 24.845649] synobios syno_platform proc entry initialized ... [ OK ] cat: can't open '/proc/sys/kernel/syno_skip_vender_mac_interfaces': No such file or directory [ 25.151755] eth0: mac address changed [ 25.206080] SWF long pool #1: pkt_size=1536, buf_size=1600, total_size=1792 - 1024 of 1024 buffers added [ 25.217813] SWF short pool #3: pkt_size= 256, buf_size= 320, total_size= 512 - 2048 of 2048 buffers added [ 25.229292] HWF long pool #5: pkt_size=1536, buf_size=1568, total_size=1568 - 1024 of 1024 buffers added [ 25.240471] HWF short pool #7: pkt_size= 480, buf_size= 512, total_size= 512 - 2048 of 2048 buffers added [ 25.250612] eth0: started [ 25.254256] eth0: link down udhcpc (v1.16.1) started eth0 Link encap:Ethernet HWaddr 00:11:32:49:33:43 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1024 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:73 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) :: Starting syslogd ... [ OK ] /etc/rc: line 271: /usr/syno/bin/syno_pstore_collect: not found :: Starting scemd :: Starting services in background Starting findhostd in flash_rd... Starting services in flash_rd... Running /usr/syno/etc/rc.d/J01httpd.sh... Starting httpd:80 in flash_rd... Starting httpd:5000 in flash_rd... Running /usr/syno/etc/rc.d/J03ssdpd.sh... /usr/bin/minissdpd -i eth0 eth0 not RUNNING Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh... Starting synoagentregisterd... Running /usr/syno/etc/rc.d/J30DisableNCQ.sh... Running /usr/syno/etc/rc.d/J80ADTFanControl.sh... Running /usr/syno/etc/rc.d/J98nbnsd.sh... Starting nbnsd... Running /usr/syno/etc/rc.d/J99avahi.sh... Starting Avahi mDNS/DNS-SD Daemon cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf :: Loading module usb-storage[ 33.372972] Initializing USB Mass Storage driver... [ 33.378563] scsi2 : usb-storage 2-1:1.0 [ 33.387939] usbcore: registered new interface driver usb-storage [ 33.393991] USB Mass Storage support registered. ... [ OK ] ============ Date ============ Sat Jan 1 00:00:08 UTC 2000 ============================== starting pid 21[ 34.377746] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2 [ 34.393159] sd 2:0:0:0: [sdq] 31309760 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 34.404041] sd 2:0:0:0: [sdq] Write Protect is off [ 34.416924] sd 2:0:0:0: [sdq] Incomplete mode parameter data [ 34.422726] sd 2:0:0:0: [sdq] Assuming drive cache: write through [ 34.440895] sd 2:0:0:0: [sdq] Incomplete mode parameter data [ 34.446604] sd 2:0:0:0: [sdq] Assuming drive cache: write through [ 34.454138] sdq: sdq1 [ 34.469171] sd 2:0:0:0: [sdq] Incomplete mode parameter data [ 34.474883] sd 2:0:0:0: [sdq] Assuming drive cache: write through [ 34.481070] sd 2:0:0:0: [sdq] Attached SCSI removable disk Sat Jan 1 00:00:09 2000 DiskStation login:
DiskStation> uname -a Linux DiskStation 3.2.40 #15284 SMP Sat May 19 04:48:54 CST 2018 armv7l GNU/Linux synology_armada375_ds215j
DiskStation> lsmod Module Size Used by Tainted: P usb_storage 38466 0 ds215j_synobios 42367 0 vfat 9207 0 fat 45519 1 vfat etxhci_hcd 78436 0 xhci_hcd 75650 0 ehci_hcd 38804 0 usbcore 147515 5 usb_storage,etxhci_hcd,xhci_hcd,ehci_hcd usb_common 577 1 usbcore
DiskStation> dmesg -T | grep -i eth [Fri Dec 31 23:59:37 1999] o eth0, ifindex = 2, GbE port = 1 [Fri Dec 31 23:59:37 1999] o eth0, phy chipid = 1410dd0, Support WOL = 32 [Fri Dec 31 23:59:56 1999] usbcore: registered new interface driver ethub [Fri Dec 31 23:59:59 1999] eth0: mac address changed [Fri Dec 31 23:59:59 1999] eth0: started [Fri Dec 31 23:59:59 1999] eth0: link down
DiskStation> ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq qlen 1024 link/ether 00:11:32:49:33:43 brd ff:ff:ff:ff:ff:ff inet 169.254.179.175/16 brd 169.254.255.255 scope global eth0
DiskStation> ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Link partner advertised link modes: 100baseT/Half Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Link detected: no
DiskStation> ethtool -i eth0 driver: mv_eth version: firmware-version: N/A bus-info: Mbus supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no
Re: [DS215j] LAN down, kernel is booting. Ideas? March 26, 2021 04:39PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
I have no idea where that `192.168.27.90` came from. Maybe an address from the previous owner's LAN?
Press Ctrl+C to abort autoboot in 3 second Marvell>>Interrupt the countdown above.
setenv serverip 192.168.0.1 setenv ipaddr 192.168.0.100And then
ping 192.168.0.1