Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 06, 2023 02:52PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 06, 2023 02:56PM |
Admin Registered: 13 years ago Posts: 18,998 |
ls -larth /boot/
cp -a uImage uImage.6.3.5-kirkwood-tld-1 cp -a uInitrd uInitrd.6.3.5-kirkwood-tld-1
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 06, 2023 03:05PM |
Registered: 4 years ago Posts: 60 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 07, 2023 10:13PM |
Registered: 1 year ago Posts: 96 |
U-Boot 2023.04-tld-1 (May 10 2023 - 23:00:14 -0700) Pogoplug V4much as I would expect it to do. However, I don't know if it's really the latest version or not. How can I tell if I'm up to date on uboot versioning?
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 07, 2023 11:04PM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
Update 25 May 2023
Update 20 May 2023
Update 17 May 2023
<snip>
9. Reboot
Upon reboot, in either serial console or netconsole, U-Boot banner should show:
U-Boot 2023.04-tld-1 (May 25 ....)
Pogo V4
DONE installation.
Quote
<snip>
Latest released kernel: linux-6.3.5-kirkwood-tld-1-bodhi.tar.bz2 (02 Jun 2023)
<snip>
=======================================================================
Updated 02 Jun 2023:
Kernel linux-6.3.5-kirkwood-tld-1 package has been uploaded. The following features were added/updated:
- General kernel upgrade. Some code rebase were needed in the patch.
- Add support for Check Point L-50 (Kirkwood 88F6821).
- Add CONFIG_LEDS_TRIGGER_CPU. This new trigger cpu can be used to blink the Status LED when there are system activities, and turn it off by default.
- See Important Note in Step 5 about uInitrd size.
Credits:
- Thanks Gravelrash for doing all the works to add support for the Check Point L-50.
Latest Linux kernel 6.x general release information can be found at:
LinuxChanges log
Download at Dropbox:
linux-6.3.5-kirkwood-tld-1-bodhi.tar.bz2
md5:
978fe815306d448a5e5e4e8b2356fba0
sha256:
d48f19bf1064c24ef383d38134d2caa9e53c00c134f5484a26033b6fb24aea0c
And as always, please verify the hash of what you've downloaded!
This tarball contains 6 files:
linux-image-6.3.5-kirkwood-tld-1_1_armel.deb
linux-headers-6.3.5-kirkwood-tld-1_1_armel.deb
config-6.3.5-kirkwood-tld-1
zImage-6.3.5-kirkwood-tld-1
linux-dtb-6.3.5-kirkwood-tld-1.tar
linux-6.3.5-kirkwood-tld-1.patch
Installation:
1. Backup your current uImage and uInitrd. In the /boot directory, these are files for your current kernel (xx.xx.xx is the version number):
Quote
uInitrd
uImage
initrd.img-xx.xx.xx-kirkwood-xxx
System.map-xx.xx.xx-kirkwood-xxx
vmlinuz-xx.xx.xx-kirkwood-xxx
config-xx.xx.xx-kirkwood-xxx
dts/
2. Extract the kernel and the DTB files in the archive:
cd /boot
tar -xjf linux-6.3.5-kirkwood-tld-1-bodhi.tar.bz2
tar -xf linux-dtb-6.3.5-kirkwood-tld-1.tar
3. And install it with dpkg. Remove flash-kernel first to avoid potential problem (if flash-kernel was not installed then you'll see some error output):
cd /boot
apt-get remove flash-kernel
dpkg -i linux-image-6.3.5-kirkwood-tld-1_1_armel.deb
4. Create uImage and uInitrd and setup for booting.
I'm using the GoFlex Net booting with USB drive as an example here. Please replace its name (kirkwood-goflexnet.dtb) with the box you are installing on (for example, kirkwood-pogo_e02.dtb). Please look inside the rootfs /boot/dts/ for the correct DTB file name for your box.
Below are the 2 different alternatives in booting (method 4b is required for booting with older U-Boot that does not support FDT, but should not be used if running latest u-boot).
- Choose option 4a if you are going to use the current rootfs for many different Kirkwood boxes, as is. It should boot most of the Kirkwood boxes. And with the latest U-Boot for Kirkwood that suports FDT (if you are installing both the new u-boot and rootfs for the first time, too). This is the preferred method.
- Choose option 4b (This method is required for booting with older U-Boot that does not support FDT) if you only use the current rootfs for the box you're installing on, and don't want to modify u-boot envs. Note that if you are installing from stock OS, u-boot envs must be modified to boot with USB or HDD (please see Boot Kirkwood rootfs with stock u-boot for how to set up the envs in serial console).
4a. Boot with DTB file (standard way to boot FDT kernel). Recommended.
Generate the uImage and uInitrd (the kernel files vmlinuz-6.3.5-kirkwood-tld-1 and initrd.img-6.3.5-kirkwood-tld-1 were generated by dpkg in Step 3):
cd /boot
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.3.5-kirkwood-tld-1 -d vmlinuz-6.3.5-kirkwood-tld-1 uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-6.3.5-kirkwood-tld-1 -d initrd.img-6.3.5-kirkwood-tld-1 uInitrd
4b. Boot with DTB file embedded in the kernel image.Again, this step 4b is for stock U-Boot only.
Please replace kirkwood-goflexnet.dtb below with the correct DTB name for your box.
Generate the uImage and uInitrd (the kernel files vmlinuz-6.2.7-kirkwood-tld-1 and initrd.img-6.2.7-kirkwood-tld-1 were generated by dpkg in Step 3):
cd /boot
mv uImage uImage.orig
mv uInitrd uInitrd.orig
cp -a zImage-6.3.5-kirkwood-tld-1 zImage.fdt
cat dts/kirkwood-goflexnet.dtb >> zImage.fdt
mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.3.5-kirkwood-tld-1 -d zImage.fdt uImage
mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs-6.3.5-kirkwood-tld-1 -d initrd.img-6.3.5-kirkwood-tld-1 uInitrd
5. The new uImage and uInitrd files should be created in /boot directory now.
5.a Important Note: Check your uInitrd size to see if it is larger than 11 MB.
ls -lh /boot/uInitrd
If it is, then do one of the 2 following alternatives.
1. (Recommended) Shrink the initramfs to get a smaller size than 11MB. This approach does not require changing u-boot envs. See here for tutorial: How To Shrink initramfs.
2. See Section B in the u-boot installation thread B. Load addresses for large systems for how to adjust u-boot envs before reboot.
5.b You're ready to reboot the system:
sync
sync
sync
shutdown -r now
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 07, 2023 11:14PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 07, 2023 11:21PM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
So if I'm on initramfs-5.13.6-kirkwood-tld-1, I need to upgrade to 6.x to get that, correct? Can I do that by upgrading the system to 6 (bookworm), or do I need to completely reinstall the rootfs and start over from scratch? Does updating uInitrd with mkimage after the upgrade take care of this?
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 07, 2023 11:55PM |
Registered: 1 year ago Posts: 96 |
U-Boot 2023.04-tld-1 (May 10 2023 - 23:00:14 -0700)because the date's immaterial.
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 12:06AM |
Admin Registered: 13 years ago Posts: 18,998 |
> U-Boot 2023.04-tld-1 (May 10 2023 - > 23:00:14 -0700) >> because the date's immaterial.
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 12:29AM |
Registered: 1 year ago Posts: 96 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 12:49AM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 01:12AM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
9. Reboot
Upon reboot, in either serial console or netconsole, U-Boot banner should show:
U-Boot 2023.04-tld-1 (May 10 ....)
Pogo V4
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 01:18AM |
Registered: 1 year ago Posts: 96 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 03:44PM |
Registered: 1 year ago Posts: 96 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 04:23PM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
https://forum.doozan.com/read.php?2,12096
Updated 26 Sept 2021:
Basic Debian bullseye Kirkwood rootfs for most Kirwood plugs:
- tarball size: 234M
- install size: 668M
- The init system used in this rootfs is sysvinit . To boot with systemd, see Notes below.
- Installed packages: nano, avahi, ntp, busybox-syslogd (log to RAM), htop, isc-dhcp-client, dialog, bzip2, nfs server/client, iperf, ethtool, sysvinit-core, sysvinit, sysvinit-utils, u-boot-tools, and mtd-utils.
- see LED controls examples in /etc/rc.local, and /etc/init.d/halt
- see some useful aliases in /root/.profile
- root password: root
devices=usb
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 08, 2023 10:56PM |
Registered: 1 year ago Posts: 96 |
> devices=usb
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 09, 2023 09:52PM |
Registered: 1 year ago Posts: 96 |
ALERT! LABEL=rootfs does not exist. Dropping to a shell!with the (initramfs) prompt.
U-Boot 2023.04-tld-1 (May 10 2023 - 23:00:14 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 Model: Cloud Engines PogoPlug Series 4 DRAM: 128 MiB Core: 20 devices, 16 uclasses, devicetree: separate NAND: 128 MiB MMC: mvsdio@90000: 0 Loading Environment from NAND... OK In: serial Out: serial Err: serial pcie0.0: Link up Net: eth0: ethernet-controller@72000 Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0 Initializing devices... resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 2 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 2 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Loading envs from usb 0... Failed to load '/boot/uEnv.txt' Loading envs from usb 1... ** Bad device specification usb 1 ** Couldn't find partition usb 1:1 Can't set block device Loading envs from usb 2... ** Bad device specification usb 2 ** Couldn't find partition usb 2:1 Can't set block device Loading envs from usb 3... ** Bad device specification usb 3 ** Couldn't find partition usb 3:1 Can't set block device Loading envs from sata 0... ** Bad device specification sata 0 ** Couldn't find partition sata 0:1 Can't set block device Loading envs from sata 1... ** Bad device specification sata 1 ** Couldn't find partition sata 1:1 Can't set block device Loading envs from sata 2... ** Bad device specification sata 2 ** Couldn't find partition sata 2:1 Can't set block device Loading envs from sata 3... ** Bad device specification sata 3 ** Couldn't find partition sata 3:1 Can't set block device running scan_disk ... Scan device usb resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 2 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 2 USB Device(s) found scanning bus xhci_pci for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found device usb 0:1 1 bytes read in 12 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 6116624 bytes read in 171 ms (34.1 MiB/s) loading uInitrd ... 10339244 bytes read in 285 ms (34.6 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 10178 bytes read in 28 ms (354.5 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-6.3.5-kirkwood-tld-1 Created: 2023-06-10 0:01:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6116560 Bytes = 5.8 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: initramfs-6.3.5-kirkwood-tld-1 Created: 2023-06-10 0:02:07 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 10339180 Bytes = 9.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Working FDT set to 1c00000 Starting kernel ... Loading Kernel Image Loading Ramdisk to 07170000, end 07b4c36c ... OK Loading Device Tree to 0716a000, end 0716f7c1 ... OK Working FDT set to 716a000 Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.3.5-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Wed May 31 18:12:24 PDT 2023 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 98144K/131072K available (12288K kernel code, 1697K rwdata, 5228K rodata, 1024K init, 302K bss, 32928K reserved, 0K cma-reserved) [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000003][ T0] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns [ 0.000074][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.003103][ T0] Console: colour dummy device 80x30 [ 0.003197][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.003242][ T0] pid_max: default: 32768 minimum: 301 [ 0.004448][ T0] LSM: initializing lsm=capability,integrity [ 0.005129][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.005186][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009101][ T0] CPU: Testing write buffer coherency: ok [ 0.014137][ T1] cblist_init_generic: Setting adjustable number of callback queues. [ 0.014168][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.014752][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.015511][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.016003][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.016650][ T1] rcu: Hierarchical SRCU implementation. [ 0.016675][ T1] rcu: Max phase no-delay instances is 1000. [ 0.019631][ T1] devtmpfs: initialized [ 0.032119][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.032190][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.032977][ T1] prandom: seed boundary self test passed [ 0.039349][ T1] prandom: 100 self tests passed [ 0.039373][ T1] pinctrl core: initialized pinctrl subsystem [ 0.044248][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.045695][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048033][ T1] audit: initializing netlink subsys (disabled) [ 0.051470][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.052112][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.052342][ T1] cpuidle: using governor ladder [ 0.052472][ T1] cpuidle: using governor menu [ 0.053362][ T1] Feroceon L2: Enabling L2 [ 0.05[ 9.441103][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.447565][ T1] i2c_dev: i2c /dev entries driver [ 9.453905][ T1] device-mapper: uevent: version 1.0.3 [ 9.459794][ T1] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 9.469986][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 9.477314][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 9.484658][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 9.492134][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 9.498912][ T1] device-mapper: raid: Loading target version 1.15.1 [ 9.507840][ T1] ledtrig-cpu: registered to indicate activity on CPUs [ 9.514749][ T1] hid: raw HID events driver (C) Jiri Kosina [ 9.521256][ T1] drop_monitor: Initializing network drop monitor service [ 9.529159][ T1] NET: Registered PF_INET6 protocol family [ 9.538150][ T1] Segment Routing with IPv6 [ 9.542610][ T1] RPL Segment Routing with IPv6 [ 9.547440][ T1] In-situ OAM (IOAM) with IPv6 [ 9.552317][ T1] NET: Registered PF_PACKET protocol family [ 9.558652][ T1] Key type dns_resolver registered [ 9.586932][ T1] registered taskstats version 1 [ 9.592225][ T1] Loading compiled-in X.509 certificates [ 9.599688][ T1] zswap: loaded using pool lzo/zbud [ 9.605937][ T1] Key type .fscrypt registered [ 9.610564][ T1] Key type fscrypt-provisioning registered [ 9.626519][ T1] Key type big_key registered [ 9.685521][ T1] Key type encrypted registered [ 9.832528][ T105] "cryptomgr_test" (105) uses obsolete ecb(arc4) skcipher [ 10.003147][ T8] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 10.023372][ T19] sd 2:0:0:0: [sda] 120164352 512-byte logical blocks: (61.5 GB/57.3 GiB) [ 10.042366][ T19] sd 2:0:0:0: [sda] Write Protect is off [ 10.061158][ T19] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 10.090833][ T19] sda: sda1 [ 10.101938][ T19] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 13.296127][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 13.312312][ T1] Checked W+X mappings: passed, no W+X pages found [ 13.318692][ T1] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u2 [ 14.678856][ T140] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 15.004195][ T139] usbcore: registered new interface driver uas [ 15.121258][ T19] mvsdio f1090000.mvsdio: Got CD GPIO Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 rootfs: recovering journal rootfs: clean, 21314/3760128 files, 684458/15020288 blocks done. [ 26.357145][ T169] EXT4-fs (sda1): mounted filesystem 58dc21e1-dd0e-4deb-8a54-24b4ea056afa with ordered data mode. Quota mode: none. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 27.306855][ T1] systemd[1]: System time before build time, advancing clock. [ 27.386844][ T1] systemd[1]: Inserted module 'autofs4' [ 27.514508][ T1] systemd[1]: systemd 247.3-7+deb11u2 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 27.539682][ T1] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 11 (bullseye)! [ 27.598295][ T1] systemd[1]: Set hostname to <jumper1912>. [ 30.630240][ T1] systemd[1]: Queued start job for default target Graphical Interface. [ 31.271110][ C0] random: crng init done [ 31.275774][ T1] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 31.288956][ T1] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 31.333173][ T1] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 31.374945][ T1] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 31.414867][ T1] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 31.454318][ T1] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 31.492292][ T1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password ‚ts to Console Directory Watch. [ 31.532231][ T1] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R‚uests to Wall Directory Watch. [ 31.573677][ T1] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary‚s File System Automount Point. [ 31.621941][ T1] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 31.662413][ T1] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 31.702031][ T1] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 31.744344][ T1] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 31.782828][ T1] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 31.822281][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 31.863667][ T1] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 31.902991][ T1] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 31.943279][ T1] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 31.983360][ T1] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 32.022702][ T1] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 32.063393][ T1] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 32.112055][ T1] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 32.160812][ T1] systemd[1]: Mounting NFSD configuration filesystem... Mounting NFSD configuration filesystem... [ 32.230633][ T1] systemd[1]: Mounting RPC Pipe File System... Mounting RPC Pipe File System... [ 32.292095][ T1] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 32.332320][ T1] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... [ 32.352271][ T1] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 32.406492][ T1] systemd[1]: Starting Restore / save the current clock... Starting Restore / save the current clock... [ 32.471583][ T1] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st‚odes for the current kernel... [ 32.553571][ T1] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 32.593576][ T1] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 32.650371][ T1] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 32.727157][ T1] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 32.739039][ T1] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 32.787593][ T1] systemd[1]: Starting Journal Service... Starting Journal Service... [ 32.873241][ T1] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 32.945689][ T1] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 33.047746][ T1] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 33.256776][ T1] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 33.303250][ T1] systemd[1]: Mounted NFSD configuration filesystem. [ OK ] Mounted NFSD configuration filesystem. [ 33.351938][ T1] systemd[1]: Mounted RPC Pipe File System. [ OK ] Mounted RPC Pipe File System. [ 33.393913][ T1] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 33.433419][ T1] systemd[1]: Mounted Kernel Trace File System. [ OK ] Mounted Kernel Trace File System. [ 33.476341][ T1] systemd[1]: Finished Restore / save the current clock. [ OK ] Finished Restore / save the current clock. [ 33.552443][ T1] systemd[1]: Finished Create list of static device nodes for the current kernel. [ OK ] Finished Create list of st‚ nodes for the current kernel. [ 33.608951][ T214] EXT4-fs (sda1): re-mounted 58dc21e1-dd0e-4deb-8a54-24b4ea056afa. Quota mode: none. [ 33.699712][ T1] systemd[1]: modprobe@configfs.service: Succeeded. [ 33.734990][ T1] systemd[1]: Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module configfs. [ 33.795663][ T1] systemd[1]: modprobe@drm.service: Succeeded. [ 33.831751][ T1] systemd[1]: Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module drm. [ 33.863125][ T1] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Remount Root and Kernel File Systems. Activating swap /swapfile1... Mounting FUSE Control File System... [ 34.201943][ T217] Adding 524284k swap on /swapfile1. Priority:-2 extents:3 across:540668k FS Mounting Kernel Configuration File System... Starting pNFS block layout mapping daemon... Starting Flush Journal to Persistent Storage... Starting Load/Save Random Seed... Starting Apply Kernel Variables... Starting Create System Users... [ OK ] Activated swap /swapfile1. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ 34.938380][ T210] systemd-journald[210]: Received client request to flush runtime journal. [ OK ] Started pNFS block layout mapping daemon. [ OK ] Reached target Swap. [ 35.034583][ T210] systemd-journald[210]: File /var/log/journal/c4334d5b2fba8bce5294b56551baee86/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Coldplug All udev Devices. Starting Helper to synchronize boot up for ifupdown... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Preprocess NFS configuration... Starting Create Volatile Files and Directories... Starting Rule-based Manage‚for Device Events and Files... [ OK ] Finished Preprocess NFS configuration. Starting NFSv4 ID-name mapping service... [ OK ] Reached target NFS client services. [ OK ] Started NFSv4 ID-name mapping service. [ OK ] Finished Create Volatile Files and Directories. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Started RPC bind portmap service. [ OK ] Reached target RPC Port Mapper. [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Periodic ext4 Onli‚ata Check for All Filesystems. [ OK ] Started Daily man-db regeneration. [ OK ] Started Update the plocate database daily. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started D-Bus System Message Bus. Starting Remove Stale Onli‚t4 Metadata Check Snapshots... Starting User Login Management... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Finished Remove Stale Onli‚ext4 Metadata Check Snapshots. [ OK ] Started User Login Management. [ OK ] Found device /dev/ttyS0. [ 39.971266][ T247] orion_wdt: Initial timeout 25 sec [ 40.845254][ T245] marvell-cesa f1030000.crypto: CESA device successfully registered [ 40.945325][ T248] sd 2:0:0:0: Attached scsi generic sg0 type 0 [* ] A start job is running for Helper t‚ot up for ifupdown (11s / 3min 4s) [ OK ] Finished Helper to synchronize boot up for ifupdown. Starting Raise network interfaces... [** ] A start job is running for Raise network interfaces (13s / 5min 11s) [*** ] A start job is running for Raise network interfaces (14s / 5min 11s) [ *** ] A start job is running for Raise network interfaces (14s / 5min 11s) [ *** ] A start job is running for Raise network interfaces (15s / 5min 11s) [ 45.980903][ C0] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 45.991515][ T17] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ ***] A start job is running for Raise network interfaces (15s / 5min 11s) [ **] A start job is running for Raise network interfaces (16s / 5min 11s) [ *] A start job is running for Raise network interfaces (16s / 5min 11s) [ **] A start job is running for Raise network interfaces (17s / 5min 11s) [ ***] A start job is running for Raise network interfaces (17s / 5min 11s) [ *** ] A start job is running for Raise network interfaces (18s / 5min 11s) [ *** ] A start job is running for Raise network interfaces (18s / 5min 11s) [*** ] A start job is running for Raise network interfaces (19s / 5min 11s) [** ] A start job is running for Raise network interfaces (19s / 5min 11s) [* ] A start job is running for Raise network interfaces (20s / 5min 11s) [ OK ] Finished Raise network interfaces. [ OK ] Reached target Network. Starting NFS Mount Daemon... Starting Network Time Service... Starting /etc/rc.local Compatibility... Starting OpenBSD Secure Shell server... [ OK ] Started systune service. [ OK ] Started NFS Mount Daemon. Starting NFS server and services... [ OK ] Started Network Time Service. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started OpenBSD Secure Shell server. [ 53.525896][ T385] NFSD: Using UMH upcall client tracking operations. [ 53.532629][ T385] NFSD: starting 90-second grace period (net f0000000) [ OK ] Finished NFS server and services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting LSB: Starts syslogd... Starting Permit User Sessions... [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Started LSB: Starts syslogd. Starting LSB: Starts klogd... [ OK ] Started LSB: Starts klogd. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. Debian GNU/Linux 11 jumper1912 ttyS0 jumper1912 login:
U-Boot 2023.04-tld-1 (May 10 2023 - 23:00:14 -0700) Pogoplug V4 SoC: Kirkwood 88F6192_A1 Model: Cloud Engines PogoPlug Series 4 DRAM: 128 MiB Core: 20 devices, 16 uclasses, devicetree: separate NAND: 128 MiB MMC: mvsdio@90000: 0 Loading Environment from NAND... OK In: serial Out: serial Err: serial pcie0.0: Link up Net: eth0: ethernet-controller@72000 Hit any key to stop autoboot: 10 9 8 7 6 5 4 3 2 1 0 Initializing devices... resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Loading envs from usb 0... Failed to load '/boot/uEnv.txt' Loading envs from usb 1... ** Bad device specification usb 1 ** Couldn't find partition usb 1:1 Can't set block device Loading envs from usb 2... ** Bad device specification usb 2 ** Couldn't find partition usb 2:1 Can't set block device Loading envs from usb 3... ** Bad device specification usb 3 ** Couldn't find partition usb 3:1 Can't set block device Loading envs from sata 0... ** Bad device specification sata 0 ** Couldn't find partition sata 0:1 Can't set block device Loading envs from sata 1... ** Bad device specification sata 1 ** Couldn't find partition sata 1:1 Can't set block device Loading envs from sata 2... ** Bad device specification sata 2 ** Couldn't find partition sata 2:1 Can't set block device Loading envs from sata 3... ** Bad device specification sata 3 ** Couldn't find partition sata 3:1 Can't set block device running scan_disk ... Scan device usb resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found resetting USB... Bus ehci@50000: USB EHCI 1.00 Bus xhci_pci: Register 400081f NbrPorts 4 Starting the controller USB XHCI 1.00 scanning bus ehci@50000 for devices... 1 USB Device(s) found scanning bus xhci_pci for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found device usb 0:1 1 bytes read in 20 ms (0 Bytes/s) Found bootable drive on usb 0 loading uImage ... 6116624 bytes read in 67 ms (87.1 MiB/s) loading uInitrd ... 10339244 bytes read in 112 ms (88 MiB/s) loading DTB /boot/dts/kirkwood-pogoplug_v4.dtb ... 10178 bytes read in 28 ms (354.5 KiB/s) ## Booting kernel from Legacy Image at 00800000 ... Image Name: Linux-6.3.5-kirkwood-tld-1 Created: 2023-06-10 0:01:51 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6116560 Bytes = 5.8 MiB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 02100000 ... Image Name: initramfs-6.3.5-kirkwood-tld-1 Created: 2023-06-10 0:02:07 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 10339180 Bytes = 9.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01c00000 Booting using the fdt blob at 0x1c00000 Working FDT set to 1c00000 Starting kernel ... Loading Kernel Image Loading Ramdisk to 07170000, end 07b4c36c ... OK Loading Device Tree to 0716a000, end 0716f7c1 ... OK Working FDT set to 716a000 Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.3.5-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 PREEMPT Wed May 31 18:12:24 PDT 2023 [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Pogoplug v4 [ 0.000000][ T0] Memory policy: Data cache writeback [ 0.000000][ T0] Zone ranges: [ 0.000000][ T0] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Movable zone start for each node [ 0.000000][ T0] Early memory node ranges [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:2M(u-boot),3M(uImage),3M(uImage2),8M(failsafe),112M(root) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 98144K/131072K available (12288K kernel code, 1697K rwdata, 5228K rodata, 1024K init, 302K bss, 32928K reserved, 0K cma-reserved) [ 0.000000][ T0] trace event string verifier disabled [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Trampoline variant of Tasks RCU enabled. [ 0.000000][ T0] Tracing variant of Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000003][ T0] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns [ 0.000074][ T0] Switching to timer-based delay loop, resolution 6ns [ 0.003106][ T0] Console: colour dummy device 80x30 [ 0.003201][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) [ 0.003244][ T0] pid_max: default: 32768 minimum: 301 [ 0.004456][ T0] LSM: initializing lsm=capability,integrity [ 0.005130][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.005185][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.009103][ T0] CPU: Testing write buffer coherency: ok [ 0.014158][ T1] cblist_init_generic: Setting adjustable number of callback queues. [ 0.014189][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.014774][ T1] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.015527][ T1] Setting up static identity map for 0x100000 - 0x100058 [ 0.016019][ T1] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.016668][ T1] rcu: Hierarchical SRCU implementation. [ 0.016694][ T1] rcu: Max phase no-delay instances is 1000. [ 0.019652][ T1] devtmpfs: initialized [ 0.032131][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.032200][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.032986][ T1] prandom: seed boundary self test passed [ 0.039357][ T1] prandom: 100 self tests passed [ 0.039380][ T1] pinctrl core: initialized pinctrl subsystem [ 0.044267][ T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.045714][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048037][ T1] audit: initializing netlink subsys (disabled) [ 0.051471][ T1] thermal_sys: Registered thermal governor 'step_wise' [ 0.052114][ T16] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.052347][ T1] cpuidle: using governor ladder [ 0.052477][ T1] cpuidle: using governor menu [ 0.053369][ T1] Feroceon L2: Enabling L2 [ 0.053423][ T1] Fe[ 9.441436][ T1] rtc-mv f1010300.rtc: internal RTC not ticking [ 9.447881][ T1] i2c_dev: i2c /dev entries driver [ 9.454126][ T1] device-mapper: uevent: version 1.0.3 [ 9.460003][ T1] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 9.470249][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded [ 9.477582][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded [ 9.484928][ T1] device-mapper: multipath service-time: version 0.3.0 loaded [ 9.492399][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 9.499174][ T1] device-mapper: raid: Loading target version 1.15.1 [ 9.508146][ T1] ledtrig-cpu: registered to indicate activity on CPUs [ 9.515051][ T1] hid: raw HID events driver (C) Jiri Kosina [ 9.521622][ T1] drop_monitor: Initializing network drop monitor service [ 9.529515][ T1] NET: Registered PF_INET6 protocol family [ 9.538295][ T1] Segment Routing with IPv6 [ 9.542801][ T1] RPL Segment Routing with IPv6 [ 9.547631][ T1] In-situ OAM (IOAM) with IPv6 [ 9.552466][ T1] NET: Registered PF_PACKET protocol family [ 9.558808][ T1] Key type dns_resolver registered [ 9.587222][ T1] registered taskstats version 1 [ 9.592523][ T1] Loading compiled-in X.509 certificates [ 9.599994][ T1] zswap: loaded using pool lzo/zbud [ 9.606255][ T1] Key type .fscrypt registered [ 9.610879][ T1] Key type fscrypt-provisioning registered [ 9.626932][ T1] Key type big_key registered [ 9.685917][ T1] Key type encrypted registered [ 9.833136][ T102] "cryptomgr_test" (102) uses obsolete ecb(arc4) skcipher [ 13.243012][ T1] Freeing unused kernel image (initmem) memory: 1024K [ 13.262640][ T1] Checked W+X mappings: passed, no W+X pages found [ 13.269014][ T1] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u2 [ 14.589161][ T137] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 14.980701][ T8] mvsdio f1090000.mvsdio: Got CD GPIO Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! LABEL=rootfs does not exist. Dropping to a shell! BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs)
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 09, 2023 10:13PM |
Registered: 4 years ago Posts: 60 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 09, 2023 10:36PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 09, 2023 11:02PM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
https://forum.doozan.com/read.php?2,12096
Updated 23 Mar 2023:
Kernel linux-6.2.7-kirkwood-tld-1 package has been uploaded. The following features were added/updated:
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 09, 2023 11:28PM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
8. (Optional) Activate netconsole
Please do not activate netconsole! I'm troubleshooting a problem, stay tune... .
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 10, 2023 11:56AM |
Registered: 4 years ago Posts: 60 |
>Quote
8. (Optional) Activate netconsole
>
> Please do not activate netconsole!
> I'm troubleshooting a problem, stay tune...
> .
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 10, 2023 12:43PM |
Registered: 1 year ago Posts: 96 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 10, 2023 03:00PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 12, 2023 12:06AM |
Admin Registered: 13 years ago Posts: 18,998 |
Quote
Update 11 Jun 2023
......
Upon reboot, in either serial console or netconsole, U-Boot banner should show:
U-Boot 2023.04-tld-1 (Jun 11 2023....)
Pogo V4
Quote
5. Flash u-boot image to NAND
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 20, 2023 07:31PM |
Registered: 1 year ago Posts: 96 |
5.13.6-kirkwood-tld-1: # lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda `-sda1 ext4 1.0 rootfs a1847d3f-589b-4ff2-8253-0f91de3aad6e 25.9G 4% / sdb `-sdb1 vfat FAT32 7055-C950
6.3.5-kirkwood-tld-1: # lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda `-sda1 ext4 1.0 rootfs a1847d3f-589b-4ff2-8253-0f91de3aad6e 25.7G 5% /
6.2.7-kirkwood-tld-1: # lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINT sda `-sda1 ext4 1.0 rootfs a1847d3f-589b-4ff2-8253-0f91de3aad6e 25.2G 7% / sdb `-sdb1 vfat FAT32 7055-C950
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 20, 2023 07:45PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 20, 2023 08:39PM |
Registered: 1 year ago Posts: 96 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 20, 2023 10:48PM |
Admin Registered: 13 years ago Posts: 18,998 |
Re: 2023.04 U-Boot Kirkwood - Pogo V4 June 21, 2023 09:58PM |
Admin Registered: 13 years ago Posts: 18,998 |