resurrecting iomega storcenter ix2 u-boot and debian November 22, 2023 02:40AM |
Registered: 9 months ago Posts: 16 |
Marvell Development Board (LSP Version 1.10.3_DB_NAS)-- DB-88F5182-DHNSMR03 Soc: 88F5182 A2 U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 Linux version 2.6.12.6-arm1 (td@localhost.localdomain) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Jul 3 15:31:00 MDT 2007 (kernel-2.6.12-DHNSMR03/04-V-2.1.2.0) Iomega834x: Flash found at location 0xffc00000 Creating 3 MTD partitions on "Flash": 0x00000000-0x00200000 : "kernel" 0x00200000-0x00380000 : "cramfs" 0x00380000-0x00400000 : "bootloader"
Re: resurrecting iomega storcenter ix2 u-boot and debian November 22, 2023 04:42AM |
Registered: 9 years ago Posts: 451 |
Re: resurrecting iomega storcenter ix2 u-boot and debian November 22, 2023 11:36AM |
Registered: 9 months ago Posts: 16 |
Re: resurrecting iomega storcenter ix2 u-boot and debian November 22, 2023 04:24PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
I have a tftp server set up and used tftp to fetch a kernel image but it went silent after jumping to it.
Perhaps starting top down makes sense, but eventually I want to update u-boot in flash.
help printenv usb start ext2ls usb 0:1 /And if you can still boot to stock, go ahead boot into stock. It's good to see what the system log looks like.
boot
Re: resurrecting iomega storcenter ix2 u-boot and debian November 23, 2023 06:10PM |
Registered: 9 months ago Posts: 16 |
2023-11-23 16:02:49 __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> ide reset Reset IDE: Marvell Serial ATA Adapter Intergrated Sata device found Device 0: OK Model: ST1000LM035-1RK172 Firm: MCC3 Ser#: WL1T1PED Type: Hard Disk Supports 48-bit addressing Capacity: 925253.9 MB = 903.5 GB (1894920048 x 512) Marvell>> ide part Partition Map for IDE device 0 -- Partition Type: DOS Partition Start Sector Num Sectors Type 1 2048 1048576000 83 2 1048578048 846342000 83 Marvell>> printenv bootdelay=15 baudrate=115200 loads_echo=0 rootpath=/mnt/ARM_FS/ filesize=180000 fileaddr=2000000 cpuName=926 CASset=min MALLOC_len=4 ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:egiga0:none image_name=uImage standalone=fsload 0x400000 $(image_name);setenv bootargs $(bootargs) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; usb1Mode=host ethact=egiga0 usb0Mode=host ethaddr=00:D0:B8:02:78:63 bootargs=root=/dev/mtdblock1 ro rootfstype=cramfs devfs=mount console=ttyS0,115200 init=/crmfsinit bootcmd=bootm ffc00000 diskconfig=2 ipaddr=192.168.86.24 serverip=192.168.86.33 stdin=serial stdout=serial stderr=serial enaMonExt=no enaFlashBuf=yes enaCpuStream=no disaMvPnp=no overEthAddr=no Environment size: 746/65532 bytes Marvell>> boot ## Booting image at ffc00000 ... Image Name: Linux-2.6.12.6-arm1 Created: 2007-07-03 21:31:03 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1456932 Bytes = 1.4 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux............................................................................................... done, booting the kernel. Linux version 2.6.12.6-arm1 (td@localhost.localdomain) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Tue Jul 3 15:31:00 MDT 2007 (kernel-2.6.12-DHNSMR03/04-V-2.1.2.0) CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 200000000, Tclk = 166666667 Memory policy: ECC disabled, Data cache writeback Built 1 zonelists Kernel command line: root=/dev/mtdblock1 ro rootfstype=cramfs devfs=mount console=ttyS0,115200 init=/crmfsinit PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 64MB 0MB 0MB 0MB = 64MB total Memory: 61696KB available (2525K code, 433K data, 96K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 config_device_cs Error : Unknown board CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 64MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PCI0_MEM ....base e8000000, size 128MB PCI0_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB DEVICE_CS0 ....base fa000000, size 2MB DEVICE_CS1 ....base f4000000, size 32MB DEVICE_CS2 ....base fa800000, size 1MB DEV_BOOCS ....base ff800000, size 8MB CRYPTO ENG ....no such mv_mtd_initialize Error : Unknown board Marvell Development Board (LSP Version 1.10.3_DB_NAS)-- DB-88F5182-DHNSMR03 Soc: 88F5182 A2 Detected Tclk 166666667 and SysClk 200000000 Marvell USB EHCI Host controller #0: c03cbb00 Marvell USB EHCI Host controller #1: c03cba40 pexBarOverlapDetect: winNum 2 overlap current 0 mvPexInit:Warning :Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. mvCesaInit: sessions=640, queue=32, pSram=f0000000 cesadev_init(c000f5c8) Fast Floating Point Emulator V0.9 (c) Peter Teichmann. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 NTFS driver 2.1.22 [Flags: R/O]. Initializing Cryptographic API Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface 'eth0' Intergrated Sata device found scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter Vendor: Seagate Model: ST1000LM035-1RK1 Rev: MCC3 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 1894920048 512-byte hdwr sectors (970199 MB) SCSI device sda: drive cache: write back SCSI device sda: 1894920048 512-byte hdwr sectors (970199 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 NFTL driver: nftlcore.c $Revision: 1.97 $, nftlmount.c $Revision: 1.40 $ Iomega834x: Probing for flash... Flash: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 Flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Iomega834x: Flash found at location 0xffc00000 Creating 3 MTD partitions on "Flash": 0x00000000-0x00200000 : "kernel" 0x00200000-0x00380000 : "cramfs" 0x00380000-0x00400000 : "bootloader" ehci_platform ehci_platform.4523: EHCI Host Controller ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523: park 0 ehci_platform ehci_platform.4523: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci_platform ehci_platform.16781: EHCI Host Controller ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781: park 0 ehci_platform ehci_platform.16781: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) NET: Registered protocol family 1 NET: Registered protocol family 17 devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Freeing init memory: 96K *** Executing /crmfsinit Checking disk available status Dual drives detected EXT3-fs: unable to read superblock mount: Mounting /dev/md/0 on /hdd failed: Invalid argument mount: Mounting /dev/md/1 on /hdd/nethdd failed: No such file or directory cp: /hdd/etc/fstab_double: No such file or directory cp: /hdd/etc/devfsd.conf_double: No such file or directory /crmfsinit: 67: cannot create /hdd/etc/diskcfg: Directory nonexistent *** No Valid filesystem detected * Initializing /var... [ ok ] * Starting respawn daemon... [ ok ] * Bringing eth0 up... + Running standard config eth0: link down + IP address: 192.168.0.90 + netmask: 255.255.255.0 + broadcast address: 192.168.0.255 + default gateway: 192.168.0.1 + boot protocol: dhcp + starting DHCP client udhcpc (v0.9.9-pre) started udhcpc[272]: udhcpc (v0.9.9-pre) started [ ok ] * Starting Toronto Discovery Client... Running non-bridged mode... /etc/default.script: 31: cannot create /etc/hosts: Read-only file system [ ok ] BusyBox v1.00 (BUILDTIME) Built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off / # route: resolving gw Sending discover... udhcpc[272]: Sending discover... Sending discover... udhcpc[272]: Sending discover... eth0: link up<5>, full duplex<5>, speed 1 Gbps<5> Sending discover... udhcpc[272]: Sending discover... Sending select for 192.168.86.24... udhcpc[272]: Sending select for 192.168.86.24... Lease of 192.168.86.24 obtained, lease time 86400 udhcpc[272]: Lease of 192.168.86.24 obtained, lease time 86400 /etc/default.script: 44: cannot create /etc/hosts: Read-only file system /etc/default.script: 53: cannot create /etc/resolv.conf: Read-only file system /etc/default.script: 54: cannot create /etc/resolv.conf: Read-only file system /etc/default.script: 61: cannot create /etc/resolv.conf: Read-only file system # cat /proc/mtd dev: size erasesize name mtd0: 00200000 00010000 "kernel" mtd1: 00180000 00010000 "cramfs" mtd2: 00080000 00010000 "bootloader"
Re: resurrecting iomega storcenter ix2 u-boot and debian November 24, 2023 12:26PM |
Registered: 9 months ago Posts: 16 |
Re: resurrecting iomega storcenter ix2 u-boot and debian November 24, 2023 03:09PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: resurrecting iomega storcenter ix2 u-boot and debian November 24, 2023 03:36PM |
Admin Registered: 13 years ago Posts: 18,821 |
md5: eedd7e0abe6327acc6ee409cd1d35767 sha256: 94cc4e5e1b95a366baf04960af197fbb5ff358986a59e075d6e9b6da2b26c56a
cp -a zImage-6.6.1-kirkwood-tld-2 zImage.fdt cat orion5x-rd88f5182-nas.dtb >> zImage.fdt mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n Linux-6.6.1-kirkwood-tld-2 -d zImage.fdt uImage
tftpboot 0x800000 uImage bootm 0x800000
Re: resurrecting iomega storcenter ix2 u-boot and debian November 24, 2023 11:29PM |
Registered: 9 months ago Posts: 16 |
** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> ide reset Reset IDE: Marvell Serial ATA Adapter Intergrated Sata device found Device 0: OK Model: ST1000LM035-1RK172 Firm: MCC3 Ser#: WL1T1PED Type: Hard Disk Supports 48-bit addressing Capacity: 925253.9 MB = 903.5 GB (1894920048 x 512) Marvell>> setenv bootargs console=ttyS0,115200 earlyprintk=serial initcall_debug loglevel=7 init=/bin/sh root=/dev/scsi/host2/bus0/target0/lun0/part2 Marvell>> tftpboot 0x800000 ix2-kw/uImage Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'ix2-kw/uImage'. Load address: 0x800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 6350545 (60e6d1 hex) Marvell>> bootm 0x800000 ## Booting image at 00800000 ... Image Name: Linux-6.6.1-kirkwood-tld-2 Created: 2023-11-25 5:18:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6350481 Bytes = 6.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.6.1-kirkwood-tld-2 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #3 PREEMPT Wed Nov 22 14:06:25 PST 2023 [ 0.000000][ T0] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Marvell Reference Design 88F5182 NAS [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback
Re: resurrecting iomega storcenter ix2 u-boot and debian November 25, 2023 01:39AM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Marvell>> setenv bootargs console=ttyS0,115200 earlyprintk=serial initcall_debug loglevel=7 init=/bin/sh root=/dev/scsi/host2/bus0/target0/lun0/part2
Marvell>> tftpboot 0x800000 ix2-kw/uImage
setenv bootargs 'console=ttyS0,115200 root=/dev/sda1 rootdelay=10 earlyprintk=serial' tftpboot 0x1400000 ix2-kw/uImage bootm 0x1400000
Re: resurrecting iomega storcenter ix2 u-boot and debian November 25, 2023 12:07PM |
Registered: 9 months ago Posts: 16 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> setenv bootargs console=ttyS0,115200 earlyprintk=serial loglevel=7 initcall_debug root=/dev/sda1 rootdelay=30 Marvell>> tftpboot 0x2000000 ix2-kw/uImage Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'ix2-kw/uImage'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 6350545 (60e6d1 hex) Marvell>> bootm 0x2000000 ## Booting image at 02000000 ... Image Name: Linux-6.6.1-kirkwood-tld-2 Created: 2023-11-25 5:18:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6350481 Bytes = 6.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.6.1-kirkwood-tld-2 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #3 PREEMPT Wed Nov 22 14:06:25 PST 2023 [ 0.000000][ T0] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Marvell Reference Design 88F5182 NAS [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> setenv bootargs 'console=ttyS0,115200 root=/dev/sda1 rootdelay=10 earlyprintk=serial' Marvell>> tftpboot 0x1400000 ix2-kw/uImage Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'ix2-kw/uImage'. Load address: 0x1400000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ###### done Bytes transferred = 6350545 (60e6d1 hex) Marvell>> bootm 0x1400000 ## Booting image at 01400000 ... Image Name: Linux-6.6.1-kirkwood-tld-2 Created: 2023-11-25 5:18:11 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6350481 Bytes = 6.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 6.6.1-kirkwood-tld-2 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #3 PREEMPT Wed Nov 22 14:06:25 PST 2023 [ 0.000000][ T0] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache [ 0.000000][ T0] OF: fdt: Machine model: Marvell Reference Design 88F5182 NAS [ 0.000000][ T0] printk: bootconsole [earlycon0] enabled [ 0.000000][ T0] Memory policy: Data cache writeback
Re: resurrecting iomega storcenter ix2 u-boot and debian November 25, 2023 04:21PM |
Admin Registered: 13 years ago Posts: 18,821 |
setenv bootargs 'console=ttyS0,115200 root=/dev/sda1 rootdelay=10 earlyprintk=serial mem=64M'
Re: resurrecting iomega storcenter ix2 u-boot and debian November 25, 2023 08:27PM |
Registered: 5 years ago Posts: 255 |
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.55 (root@fbbf9fbb63a7) (arm-linux-gnueabi-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #12 Sun Oct 8 08:16:56 UTC 2023 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Buffalo Linkstation Pro/Live [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 bootshim=1 [ 0.000000] Unknown kernel command line parameters "bootshim=1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] Memory: 112352K/131072K available (7710K kernel code, 1167K rwdata, 2552K rodata, 248K init, 235K bss, 18720K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000003] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns [ 0.000087] Switching to timer-based delay loop, resolution 6ns [ 0.000533] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666) [ 0.000586] CPU: Testing write buffer coherency: ok [ 0.000923] pid_max: default: 32768 minimum: 301 [ 0.002144] LSM: Security Framework initializing [ 0.003137] landlock: Up and running. [ 0.003153] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003741] AppArmor: AppArmor initialized [ 0.004579] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004641] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.013904] cblist_init_generic: Setting adjustable number of callback queues. [ 0.013934] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.014691] Setting up static identity map for 0x8220 - 0x825c [ 0.019116] devtmpfs: initialized [ 0.028973] VFP support v0.3: not present [ 0.029475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.029553] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.030219] pinctrl core: initialized pinctrl subsystem [ 0.035832] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.037926] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040427] audit: initializing netlink subsys (disabled) [ 0.042951] thermal_sys: Registered thermal governor 'fair_share' [ 0.042983] thermal_sys: Registered thermal governor 'bang_bang' [ 0.043003] thermal_sys: Registered thermal governor 'step_wise' [ 0.043023] thermal_sys: Registered thermal governor 'user_space' [ 0.043109] cpuidle: using governor ladder [ 0.043446] Orion ID: MV88F5182-A2. TCLK=0. [ 0.044231] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.061936] No ATAGs? [ 0.992565] raid6: int32x8 gen() 37 MB/s [ 1.060193] raid6: int32x4 gen() 40 MB/s [ 1.128387] raid6: int32x2 gen() 68 MB/s [ 1.196282] raid6: int32x1 gen() 84 MB/s [ 1.196314] raid6: using algorithm int32x1 gen() 84 MB/s [ 1.264266] raid6: .... xor() 37 MB/s, rmw enabled [ 1.264292] raid6: using intx1 recovery algorithm [ 1.267433] SCSI subsystem initialized [ 1.268446] libata version 3.00 loaded. [ 1.269452] usbcore: registered new interface driver usbfs [ 1.269673] usbcore: registered new interface driver hub [ 1.269839] usbcore: registered new device driver usb [ 1.277724] clocksource: Switched to clocksource orion_clocksource [ 1.280152] VFS: Disk quotas dquot_6.6.0 [ 1.280514] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.283969] AppArmor: AppArmor Filesystem Enabled [ 1.289924] NET: Registered PF_INET protocol family [ 1.291132] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.294656] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.295304] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.295392] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.295478] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 1.295663] TCP: Hash tables configured (established 1024 bind 1024) [ 1.296097] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.296216] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.297122] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.297374] PCI: CLS 0 bytes, default 32 [ 1.301887] Trying to unpack rootfs image as initramfs... [ 2.432534] Initialise system trusted keyrings [ 2.432815] Key type blacklist registered [ 2.436432] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 2.501404] fuse: init (API version 7.37) [ 2.502979] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 2.512269] NET: Registered PF_ALG protocol family [ 2.512356] xor: measuring software checksum speed [ 2.543745] arm4regs : 315 MB/sec [ 2.587441] 8regs : 225 MB/sec [ 2.624959] 32regs : 262 MB/sec [ 2.624991] xor: using function: arm4regs (315 MB/sec) [ 2.721082] async_tx: api initialized (async) [ 2.721141] Key type asymmetric registered [ 2.721166] Asymmetric key parser 'x509' registered [ 5.060193] Freeing initrd memory: 5304K [ 5.184793] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 5.185582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 5.192947] orion-pinctrl f1010000.pinctrl: registered pinctrl driver [ 5.199030] mv_xor f1060900.dma-controller: Marvell shared XOR driver [ 5.263009] mv_xor f1060900.dma-controller: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 5.278132] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 5.283507] printk: console [ttyS0] disabled [ 5.283751] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 10416666) is a 16550A [ 5.899162] printk: console [ttyS0] enabled [ 5.906103] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 10416666) is a 16550A [ 5.951308] loop: module loaded [ 5.955772] sata_mv sata_mv.0: version 1.28 [ 5.956185] sata_mv sata_mv.0: cannot get optional clkdev [ 5.962706] sata_mv sata_mv.0: slots 32 ports 2 [ 5.982400] scsi host0: sata_mv [ 5.988405] scsi host1: sata_mv [ 5.992681] ata1: SATA max UDMA/133 irq 25 [ 5.996879] ata2: SATA max UDMA/133 irq 25 [ 6.067842] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 6.200129] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:16:01:41:27:49 [ 6.210313] orion-ehci f1050000.ehci: EHCI Host Controller [ 6.216060] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 6.224474] orion-ehci f1050000.ehci: irq 28, io mem 0xf1050000 [ 6.245786] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 6.253041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 6.261434] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.268732] usb usb1: Product: EHCI Host Controller [ 6.273688] usb usb1: Manufacturer: Linux 6.1.55 ehci_hcd [ 6.279205] usb usb1: SerialNumber: f1050000.ehci [ 6.286412] hub 1-0:1.0: USB hub found [ 6.290537] hub 1-0:1.0: 1 port detected [ 6.296525] orion-ehci f10a0000.ehci: EHCI Host Controller [ 6.302275] orion-ehci f10a0000.ehci: new USB bus registered, assigned bus number 2 [ 6.310809] orion-ehci f10a0000.ehci: irq 29, io mem 0xf10a0000 [ 6.316949] ata1: SATA link down (SStatus 0 SControl 300) [ 6.337786] orion-ehci f10a0000.ehci: USB 2.0 started, EHCI 1.00 [ 6.344716] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 6.353079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.360374] usb usb2: Product: EHCI Host Controller [ 6.365323] usb usb2: Manufacturer: Linux 6.1.55 ehci_hcd [ 6.370830] usb usb2: SerialNumber: f10a0000.ehci [ 6.377837] hub 2-0:1.0: USB hub found [ 6.381801] hub 2-0:1.0: 1 port detected [ 6.387680] usbcore: registered new interface driver usb-storage [ 6.394255] i2c_dev: i2c /dev entries driver [ 6.399437] mv64xxx_i2c mv64xxx_i2c.0: can't get pinctrl, bus recovery not supported [ 6.410660] rtc-rs5c372 0-0032: rs5c372a found, 24hr [ 6.421467] rtc rtc0: invalid alarm value: 2023-11-26T45:85:00 [ 6.428121] rtc-rs5c372 0-0032: registered as rtc0 [ 6.434964] rtc-rs5c372 0-0032: setting system clock to 2023-11-26T01:46:57 UTC (1700963217) [ 6.449959] device-mapper: uevent: version 1.0.3 [ 6.455995] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.466555] device-mapper: multipath round-robin: version 1.2.0 loaded [ 6.473253] device-mapper: multipath queue-length: version 0.2.0 loaded [ 6.479946] device-mapper: multipath service-time: version 0.3.0 loaded [ 6.486995] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 6.493172] device-mapper: raid: Loading target version 1.15.1 [ 6.499889] ledtrig-cpu: registered to indicate activity on CPUs [ 6.508212] marvell-cesa mv_crypto: CESA device successfully registered [ 6.516980] physmap-flash f4000000.flash: physmap platform flash device: [mem 0xf4000000-0xf403ffff] [ 6.526298] Found: SST 39LF020 [ 6.529387] f4000000.flash: Found 1 x8 devices at 0x0 in 8-bit bank [ 6.591331] Support for command set 0002 not present [ 6.596422] gen_probe: No supported Vendor Command Set found [ 6.602168] physmap-flash f4000000.flash: map_probe failed [ 6.611928] NET: Registered PF_INET6 protocol family [ 6.734505] Segment Routing with IPv6 [ 6.738906] In-situ OAM (IOAM) with IPv6 [ 6.743389] NET: Registered PF_PACKET protocol family [ 6.750822] registered taskstats version 1 [ 6.755164] Loading compiled-in X.509 certificates [ 6.797861] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.810156] ata2.00: ATA-8: KingDian S100 16GB, 20141224, max UDMA/133 [ 6.816795] ata2.00: 30932992 sectors, multi 0: LBA48 [ 6.836811] ata2.00: configured for UDMA/133 [ 6.842198] scsi 1:0:0:0: Direct-Access ATA KingDian S100 16 1224 PQ: 0 ANSI: 5 [ 6.862320] sd 1:0:0:0: [sda] 30932992 512-byte logical blocks: (15.8 GB/14.8 GiB) [ 6.874590] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.886052] sd 1:0:0:0: [sda] Write Protect is off [ 6.890968] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.898147] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.914294] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.941779] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > [ 6.959127] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.970390] Key type encrypted registered [ 6.974941] AppArmor: AppArmor sha1 policy hashing enabled [ 7.005116] Freeing unused kernel image (initmem) memory: 248K [ 7.011067] Kernel memory protection not selected by kernel config. [ 7.017461] Run /init as init process [ 7.021223] with arguments: [ 7.021258] /init [ 7.021287] with environment: [ 7.021313] HOME=/ [ 7.021341] TERM=linux [ 7.021369] bootshim=1 [ 11.913184] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: none. [ 13.242231] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 13.275225] systemd[1]: Detected architecture arm. [ 13.314087] systemd[1]: Hostname set to <lsgl-bookworm>. [ 18.741138] systemd[1]: Queued start job for default target graphical.target. [ 18.779649] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 18.814566] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 18.850700] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 18.886362] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 18.919353] systemd[1]: Created slice user.slice - User and Session Slice. [ 18.948275] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 18.979997] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 19.015811] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 19.048439] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 19.075844] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 19.104241] systemd[1]: Reached target paths.target - Path Units. [ 19.127351] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 19.154876] systemd[1]: Reached target slices.target - Slice Units. [ 19.180473] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 19.210254] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 19.240296] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 19.272335] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 19.302997] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 19.334630] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 19.363903] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 19.394299] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 19.427646] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 19.462234] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 19.537036] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 19.630111] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 19.710439] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 19.807961] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 19.925652] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 20.045181] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 20.152896] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 20.260793] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 20.373231] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 20.485117] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 20.537621] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 20.596706] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 20.626060] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 20.664805] systemd[1]: Starting systemd-journald.service - Journal Service... [ 20.748051] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 20.861394] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 21.005623] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 21.337323] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 21.408757] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 21.468669] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 21.544311] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 21.630238] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 21.706362] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 21.754367] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 21.823647] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 21.830876] EXT4-fs (sda5): re-mounted. Quota mode: none. [ 21.878341] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 22.017580] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 22.054249] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 22.118818] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 22.154252] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 22.218745] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 22.250505] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 22.314956] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 22.346470] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 22.400629] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 22.456113] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 22.579886] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 22.715289] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 22.783335] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 22.835968] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 22.961081] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 23.027934] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 23.157046] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 23.332985] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 23.974961] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 24.048725] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 24.334871] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 24.537890] random: crng init done [ 24.584204] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 24.656301] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 24.842304] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ 24.944623] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 25.191432] systemd[1]: Started systemd-journald.service - Journal Service. [ 25.957877] systemd-journald[197]: Received client request to flush runtime journal. [ 34.520118] Adding 976892k swap on /dev/sda2. Priority:-2 extents:1 across:976892k SS [ 35.514565] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 35.555103] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 35.564874] ext3 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 37.222554] audit: type=1400 audit(1700963248.284:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=258 comm="apparmor_parser" [ 37.507193] audit: type=1400 audit(1700963248.568:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=259 comm="apparmor_parser" [ 37.551367] audit: type=1400 audit(1700963248.568:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=259 comm="apparmor_parser" [ 38.239516] audit: type=1400 audit(1700963249.300:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=260 comm="apparmor_parser" [ 38.298008] audit: type=1400 audit(1700963249.300:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=260 comm="apparmor_parser" [ 38.353937] audit: type=1400 audit(1700963249.300:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=260 comm="apparmor_parser" [ 38.400726] audit: type=1400 audit(1700963249.300:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=260 comm="apparmor_parser" [ 38.503236] audit: type=1400 audit(1700963249.564:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=262 comm="apparmor_parser" [ 38.529525] audit: type=1400 audit(1700963249.564:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=262 comm="apparmor_parser" [ 38.555522] audit: type=1400 audit(1700963249.564:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=262 comm="apparmor_parser" [ 43.925849] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 43.935826] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 43.945916] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 49.213757] sched: RT throttling activated
Re: resurrecting iomega storcenter ix2 u-boot and debian November 26, 2023 03:28PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: resurrecting iomega storcenter ix2 u-boot and debian November 26, 2023 04:29PM |
Registered: 9 months ago Posts: 16 |
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> tftpboot 0x2000000 buffalo/uImage.buffalo.lsgl Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'buffalo/uImage.buffalo.lsgl'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 3878123 (3b2ceb hex) Marvell>> tftpboot 0x2800000 orion/busyrd Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'orion/busyrd'. Load address: 0x2800000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 2865543 (2bb987 hex) Marvell>> setenv bootargs root=/dev/scsi/host3/bus0/target0/lun0/part1 rootwait=7 console=ttyS0,115200 init=/bin/sh mem=64M raid=noautodetect Marvell>> bootm 0x2000000 0x2800000 ## Booting image at 02000000 ... Image Name: debian_installer Created: 2018-01-01 1:01:01 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3878059 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02800000 ... Image Name: Created: 2023-11-26 3:43:24 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 2865479 Bytes = 2.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.197 (root@11e4a3dcd714) (arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #22 Sun Oct 8 02:06:18 UTC 2023 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Buffalo Linkstation Pro/Live [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,115200 bootshim=1 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 50344K/65536K available (7576K kernel code, 1116K rwdata, 2148K rodata, 384K init, 236K bss, 15192K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 32857 entries in 97 pages [ 0.000000] ftrace: allocated 97 pages with 3 groups [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000021] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000110] Switching to timer-based delay loop, resolution 6ns [ 0.000487] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666) [ 0.000544] CPU: Testing write buffer coherency: ok [ 0.000905] pid_max: default: 32768 minimum: 301 [ 0.002534] LSM: Security Framework initializing [ 0.003148] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003969] AppArmor: AppArmor initialized [ 0.004489] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004554] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.012945] Setting up static identity map for 0x8200 - 0x823c [ 0.016568] devtmpfs: initialized [ 0.027963] VFP support v0.3: not present [ 0.028623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.028700] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.029316] pinctrl core: initialized pinctrl subsystem [ 0.035072] NET: Registered protocol family 16 [ 0.037047] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040365] audit: initializing netlink subsys (disabled) [ 0.043053] thermal_sys: Registered thermal governor 'fair_share' [ 0.043080] thermal_sys: Registered thermal governor 'bang_bang' [ 0.043120] thermal_sys: Registered thermal governor 'step_wise' [ 0.043155] thermal_sys: Registered thermal governor 'user_space' [ 0.043329] cpuidle: using governor ladder [ 0.043383] cpuidle: using governor menu [ 0.043587] Orion ID: MV88F5182-A2. TCLK=0. [ 0.044204] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.064967] No ATAGs? [ 0.180774] raid6: int32x8 gen() 37 MB/s [ 0.248508] raid6: int32x8 xor() 23 MB/s [ 0.316330] raid6: int32x4 gen() 40 MB/s [ 0.384496] raid6: int32x4 xor() 25 MB/s [ 0.452244] raid6: int32x2 gen() 68 MB/s [ 0.520385] raid6: int32x2 xor() 44 MB/s [ 0.588211] raid6: int32x1 gen() 85 MB/s [ 0.656341] raid6: int32x1 xor() 36 MB/s [ 0.656379] raid6: using algorithm int32x1 gen() 85 MB/s [ 0.656407] raid6: .... xor() 36 MB/s, rmw enabled [ 0.656435] raid6: using intx1 recovery algorithm [ 0.659474] SCSI subsystem initialized [ 0.661351] usbcore: registered new interface driver usbfs [ 0.661596] usbcore: registered new interface driver hub [ 0.661887] usbcore: registered new device driver usb [ 0.667995] clocksource: Switched to clocksource orion_clocksource [ 1.264627] VFS: Disk quotas dquot_6.6.0 [ 1.264913] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.267553] AppArmor: AppArmor Filesystem Enabled [ 1.272804] NET: Registered protocol family 2 [ 1.273383] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.275916] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.276735] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.276825] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.276885] TCP: Hash tables configured (established 1024 bind 1024) [ 1.277285] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.277383] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.278291] NET: Registered protocol family 1 [ 1.278419] PCI: CLS 0 bytes, default 32 [ 1.279434] Trying to unpack rootfs image as initramfs... [ 1.281960] Initramfs unpacking failed: no cpio magic [ 1.304767] Freeing initrd memory: 2800K [ 1.308335] Initialise system trusted keyrings [ 1.308777] Key type blacklist registered [ 1.309746] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 1.338606] zbud: loaded [ 1.347361] fuse: init (API version 7.32) [ 1.348990] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1.356888] NET: Registered protocol family 38 [ 1.356981] xor: measuring software checksum speed [ 1.389531] arm4regs : 302 MB/sec [ 1.433995] 8regs : 222 MB/sec [ 1.472731] 32regs : 254 MB/sec [ 1.472767] xor: using function: arm4regs (302 MB/sec) [ 1.472911] async_tx: api initialized (async) [ 1.472978] Key type asymmetric registered [ 1.473013] Asymmetric key parser 'x509' registered [ 1.473179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.479084] orion-pinctrl f1010000.pinctrl: registered pinctrl driver [ 1.483266] mv_xor f1060900.dma-controller: Marvell shared XOR driver [ 1.544674] mv_xor f1060900.dma-controller: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.557655] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 1.562329] printk: console [ttyS0] disabled [ 1.562580] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 10416666) is a 16550A [ 2.169946] printk: console [ttyS0] enabled [ 2.176537] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 10416666) is a 16550A [ 2.224874] loop: module loaded [ 2.229590] sata_mv sata_mv.0: cannot get optional clkdev [ 2.236060] sata_mv sata_mv.0: slots 32 ports 2 [ 2.254555] scsi host0: sata_mv [ 2.260574] scsi host1: sata_mv [ 2.264840] ata1: SATA max UDMA/133 irq 28 [ 2.269024] ata2: SATA max UDMA/133 irq 28 [ 2.285815] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing. [ 2.293838] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.302224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.308955] ehci-pci: EHCI PCI platform driver [ 2.313657] ehci-orion: EHCI orion driver [ 2.318182] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.323856] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 2.332217] orion-ehci f1050000.ehci: irq 26, io mem 0xf1050000 [ 2.352107] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 2.359121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.367468] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.374745] usb usb1: Product: EHCI Host Controller [ 2.379685] usb usb1: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.385319] usb usb1: SerialNumber: f1050000.ehci [ 2.392231] hub 1-0:1.0: USB hub found [ 2.396291] hub 1-0:1.0: 1 port detected [ 2.401938] orion-ehci f10a0000.ehci: EHCI Host Controller [ 2.407701] orion-ehci f10a0000.ehci: new USB bus registered, assigned bus number 2 [ 2.416169] orion-ehci f10a0000.ehci: irq 30, io mem 0xf10a0000 [ 2.436106] orion-ehci f10a0000.ehci: USB 2.0 started, EHCI 1.00 [ 2.443258] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.451603] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.458881] usb usb2: Product: EHCI Host Controller [ 2.463821] usb usb2: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.469456] usb usb2: SerialNumber: f10a0000.ehci [ 2.476458] hub 2-0:1.0: USB hub found [ 2.480416] hub 2-0:1.0: 1 port detected [ 2.486414] usbcore: registered new interface driver usb-storage [ 2.493037] i2c /dev entries driver [ 2.499064] rtc-rs5c372 0-0032: can't read registers [ 2.504231] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 2.516360] device-mapper: uevent: version 1.0.3 [ 2.522384] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.533787] device-mapper: multipath round-robin: version 1.2.0 loaded [ 2.540516] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.547262] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.554344] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.560601] device-mapper: raid: Loading target version 1.15.1 [ 2.567307] ledtrig-cpu: registered to indicate activity on CPUs [ 2.581246] marvell-cesa mv_crypto: CESA device successfully registered [ 2.588135] ata1: SATA link down (SStatus 0 SControl 300) [ 2.596973] physmap-flash f4000000.flash: physmap platform flash device: [mem 0xf4000000-0xf403ffff] [ 2.606462] physmap-flash f4000000.flash: map_probe failed [ 2.616610] NET: Registered protocol family 10 [ 2.634062] Segment Routing with IPv6 [ 2.638548] NET: Registered protocol family 17 [ 2.644411] registered taskstats version 1 [ 2.648606] Loading compiled-in X.509 certificates [ 2.654456] AppArmor: AppArmor sha1 policy hashing enabled [ 2.660149] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 2.830530] usb 1-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2.838821] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.846082] usb 1-1: Product: SanDisk 3.2Gen1 [ 2.850598] usb 1-1: Manufacturer: USB [ 2.854513] usb 1-1: SerialNumber: 04010e951e6410a8243d7485d3343fc65ce253dd11f64fcef9814fea113ce1a135e600000000000000000000e40f2490ff95551883558107b0ad1dd6 [ 2.870608] usb-storage 1-1:1.0: USB Mass Storage device detected [ 2.878789] scsi host2: usb-storage 1-1:1.0 [ 2.908790] ata2: SATA link down (SStatus 0 SControl 300) [ 2.914409] md: Waiting for all devices to be available before autodetect [ 2.921254] md: If you don't use raid, use raid=noautodetect [ 2.926959] md: Autodetecting RAID arrays. [ 2.931110] md: autorun ... [ 2.933957] md: ... autorun DONE. [ 2.937865] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 2.945412] Please append a correct "root=" boot option; here are the available partitions: [ 2.953840] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.962106] CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.197 #22 [ 2.968105] Hardware name: Marvell Orion5x (Flattened Device Tree) [ 2.974337] [<c0014b98>] (unwind_backtrace) from [<c0011a00>] (show_stack+0x18/0x1c) [ 2.982104] [<c0011a00>] (show_stack) from [<c07638b4>] (panic+0xf0/0x320) [ 2.989016] [<c07638b4>] (panic) from [<c09c9540>] (mount_block_root+0x29c/0x330) [ 2.996530] [<c09c9540>] (mount_block_root) from [<c09c979c>] (prepare_namespace+0x14c/0x188) [ 3.005078] [<c09c979c>] (prepare_namespace) from [<c076b110>] (kernel_init+0x10/0x100) [ 3.013097] [<c076b110>] (kernel_init) from [<c0008320>] (ret_from_fork+0x14/0x34) [ 3.020659] Exception stack(0xc10fffb0 to 0xc10ffff8) [ 3.025719] ffa0: 00000000 00000000 00000000 00000000 [ 3.033900] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.042078] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 3.048707] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Re: resurrecting iomega storcenter ix2 u-boot and debian November 26, 2023 05:27PM |
Registered: 5 years ago Posts: 255 |
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
Re: resurrecting iomega storcenter ix2 u-boot and debian November 26, 2023 05:56PM |
Admin Registered: 13 years ago Posts: 18,821 |
[ 2.953840] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)Note that there is no root device in the bootargs
[ 0.000000] Kernel command line: console=ttyS0,115200 bootshim=1
Re: resurrecting iomega storcenter ix2 u-boot and debian November 27, 2023 02:30AM |
Registered: 9 months ago Posts: 16 |
Marvell>> setenv bootargs mem=64M earlyprintk=serial console=ttyS0,115200 root=/dev/sda1 raid=noautodetect Marvell>> setenv kaddr 2000000 ; setenv iaddr 2400000 ; tftpboot $(kaddr) buffalo/uImage.buffalo.lsgl ; tftpboot $(iaddr) orion/busyrd ; bootm $(kaddr) $(iaddr) Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'buffalo/uImage.buffalo.lsgl'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 3878155 (3b2d0b hex) Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'orion/busyrd'. Load address: 0x2400000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 2865543 (2bb987 hex) ## Booting image at 02000000 ... Image Name: debian_installer Created: 2018-01-01 9:01:01 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3878091 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02400000 ... Image Name: Created: 2023-11-26 3:43:24 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 2865479 Bytes = 2.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.197 (root@11e4a3dcd714) (arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #22 Sun Oct 8 02:06:18 UTC 2023 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Buffalo Linkstation Pro/Live [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,115200 rootdelay=30 root=PARTLABEL=ROOT [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 50344K/65536K available (7576K kernel code, 1116K rwdata, 2148K rodata, 384K init, 236K bss, 15192K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 32857 entries in 97 pages [ 0.000000] ftrace: allocated 97 pages with 3 groups [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000021] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000110] Switching to timer-based delay loop, resolution 6ns [ 0.000495] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666) [ 0.000552] CPU: Testing write buffer coherency: ok [ 0.000913] pid_max: default: 32768 minimum: 301 [ 0.002536] LSM: Security Framework initializing [ 0.003148] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003968] AppArmor: AppArmor initialized [ 0.004486] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004551] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.012960] Setting up static identity map for 0x8200 - 0x823c [ 0.016597] devtmpfs: initialized [ 0.028235] VFP support v0.3: not present [ 0.028826] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.028903] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.029524] pinctrl core: initialized pinctrl subsystem [ 0.035294] NET: Registered protocol family 16 [ 0.037330] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040666] audit: initializing netlink subsys (disabled) [ 0.043361] thermal_sys: Registered thermal governor 'fair_share' [ 0.043389] thermal_sys: Registered thermal governor 'bang_bang' [ 0.043430] thermal_sys: Registered thermal governor 'step_wise' [ 0.043464] thermal_sys: Registered thermal governor 'user_space' [ 0.043638] cpuidle: using governor ladder [ 0.043692] cpuidle: using governor menu [ 0.043957] Orion ID: MV88F5182-A2. TCLK=0. [ 0.049230] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.065170] No ATAGs? [ 0.180163] raid6: int32x8 gen() 37 MB/s [ 0.248495] raid6: int32x8 xor() 23 MB/s [ 0.316331] raid6: int32x4 gen() 40 MB/s [ 0.384494] raid6: int32x4 xor() 25 MB/s [ 0.452253] raid6: int32x2 gen() 68 MB/s [ 0.520386] raid6: int32x2 xor() 44 MB/s [ 0.588211] raid6: int32x1 gen() 85 MB/s [ 0.656337] raid6: int32x1 xor() 36 MB/s [ 0.656375] raid6: using algorithm int32x1 gen() 85 MB/s [ 0.656403] raid6: .... xor() 36 MB/s, rmw enabled [ 0.656432] raid6: using intx1 recovery algorithm [ 0.659364] SCSI subsystem initialized [ 0.661244] usbcore: registered new interface driver usbfs [ 0.661493] usbcore: registered new interface driver hub [ 0.661782] usbcore: registered new device driver usb [ 0.667977] clocksource: Switched to clocksource orion_clocksource [ 1.265399] VFS: Disk quotas dquot_6.6.0 [ 1.265680] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.268433] AppArmor: AppArmor Filesystem Enabled [ 1.273723] NET: Registered protocol family 2 [ 1.274305] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.276930] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.277594] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.277679] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.277739] TCP: Hash tables configured (established 1024 bind 1024) [ 1.278134] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.278232] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.279135] NET: Registered protocol family 1 [ 1.279265] PCI: CLS 0 bytes, default 32 [ 1.280412] Trying to unpack rootfs image as initramfs... [ 1.282861] Initramfs unpacking failed: no cpio magic [ 1.305657] Freeing initrd memory: 2800K [ 1.309155] Initialise system trusted keyrings [ 1.309649] Key type blacklist registered [ 1.310629] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 1.339475] zbud: loaded [ 1.348250] fuse: init (API version 7.32) [ 1.349808] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1.357724] NET: Registered protocol family 38 [ 1.357818] xor: measuring software checksum speed [ 1.390368] arm4regs : 304 MB/sec [ 1.434829] 8regs : 221 MB/sec [ 1.473563] 32regs : 254 MB/sec [ 1.473599] xor: using function: arm4regs (304 MB/sec) [ 1.473742] async_tx: api initialized (async) [ 1.473809] Key type asymmetric registered [ 1.473846] Asymmetric key parser 'x509' registered [ 1.474013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.479907] orion-pinctrl f1010000.pinctrl: registered pinctrl driver [ 1.483934] mv_xor f1060900.dma-controller: Marvell shared XOR driver [ 1.544656] mv_xor f1060900.dma-controller: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.557668] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 1.562348] printk: console [ttyS0] disabled [ 1.562599] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 10416666) is a 16550A [ 2.172067] printk: console [ttyS0] enabled [ 2.178584] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 10416666) is a 16550A [ 2.227058] loop: module loaded [ 2.231786] sata_mv sata_mv.0: cannot get optional clkdev [ 2.238251] sata_mv sata_mv.0: slots 32 ports 2 [ 2.256861] scsi host0: sata_mv [ 2.262792] scsi host1: sata_mv [ 2.267062] ata1: SATA max UDMA/133 irq 28 [ 2.271250] ata2: SATA max UDMA/133 irq 28 [ 2.287856] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing. [ 2.295876] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.304336] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.311055] ehci-pci: EHCI PCI platform driver [ 2.315764] ehci-orion: EHCI orion driver [ 2.320356] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.326010] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 2.334293] orion-ehci f1050000.ehci: irq 26, io mem 0xf1050000 [ 2.356088] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 2.363242] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.371586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.378863] usb usb1: Product: EHCI Host Controller [ 2.383803] usb usb1: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.389437] usb usb1: SerialNumber: f1050000.ehci [ 2.396398] hub 1-0:1.0: USB hub found [ 2.400454] hub 1-0:1.0: 1 port detected [ 2.406084] orion-ehci f10a0000.ehci: EHCI Host Controller [ 2.411846] orion-ehci f10a0000.ehci: new USB bus registered, assigned bus number 2 [ 2.420317] orion-ehci f10a0000.ehci: irq 30, io mem 0xf10a0000 [ 2.440085] orion-ehci f10a0000.ehci: USB 2.0 started, EHCI 1.00 [ 2.446998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.455340] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.462619] usb usb2: Product: EHCI Host Controller [ 2.467560] usb usb2: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.473194] usb usb2: SerialNumber: f10a0000.ehci [ 2.480298] hub 2-0:1.0: USB hub found [ 2.484257] hub 2-0:1.0: 1 port detected [ 2.490275] usbcore: registered new interface driver usb-storage [ 2.496899] i2c /dev entries driver [ 2.502794] rtc-rs5c372 0-0032: can't read registers [ 2.507960] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 2.520280] device-mapper: uevent: version 1.0.3 [ 2.526318] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.536876] device-mapper: multipath round-robin: version 1.2.0 loaded [ 2.543595] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.550347] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.557441] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.563700] device-mapper: raid: Loading target version 1.15.1 [ 2.570418] ledtrig-cpu: registered to indicate activity on CPUs [ 2.584283] marvell-cesa mv_crypto: CESA device successfully registered [ 2.593165] physmap-flash f4000000.flash: physmap platform flash device: [mem 0xf4000000-0xf403ffff] [ 2.602684] physmap-flash f4000000.flash: map_probe failed [ 2.608299] ata1: SATA link down (SStatus 0 SControl 300) [ 2.619543] NET: Registered protocol family 10 [ 2.637342] Segment Routing with IPv6 [ 2.641837] NET: Registered protocol family 17 [ 2.647536] registered taskstats version 1 [ 2.651736] Loading compiled-in X.509 certificates [ 2.657842] AppArmor: AppArmor sha1 policy hashing enabled [ 2.670637] Waiting 30 sec before mounting root device... [ 2.744096] usb 2-1: new high-speed USB device number 2 using orion-ehci [ 2.906521] usb 2-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2.914813] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.922059] usb 2-1: Product: SanDisk 3.2Gen1 [ 2.926574] usb 2-1: Manufacturer: USB [ 2.930490] usb 2-1: SerialNumber: 04010e951e6410a8243d7485d3343fc65ce253dd11f64fcef9814fea113ce1a135e600000000000000000000e40f2490ff95551883558107b0ad1dd6 [ 2.944519] ata2: SATA link down (SStatus 0 SControl 300) [ 2.952441] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.960644] scsi host2: usb-storage 2-1:1.0 [ 3.974105] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 3.986395] sd 2:0:0:0: [sda] 60125184 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 3.994403] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.001634] sd 2:0:0:0: [sda] Write Protect is off [ 4.008207] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.051748] sda: sda1 sda2 [ 4.064767] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 33.764085] md: Waiting for all devices to be available before autodetect [ 33.770941] md: If you don't use raid, use raid=noautodetect [ 33.776742] md: Autodetecting RAID arrays. [ 33.780897] md: autorun ... [ 33.783702] md: ... autorun DONE. [ 33.819892] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 33.827779] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 33.854944] Freeing unused kernel memory: 384K [ 33.859456] Kernel memory protection not selected by kernel config. [ 33.865786] Run /sbin/init as init process BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off ~ # mount -t proc none /proc ~ # df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 8154588 20684 7698092 0% / ~ # busybox | head -1 BusyBox v1.30.1 (Debian 1:1.30.1-6+b3) multi-call binary. ~ # reboot -f [ 781.541159] reboot: Restarting system
Re: resurrecting iomega storcenter ix2 u-boot and debian November 27, 2023 12:31PM |
Registered: 5 years ago Posts: 255 |
cat armel_shim vmlinuz orion5x-linkstation-lsgl.dtb > tmpkern mkimage -A arm -O linux -T Kernel -C none -a 0x00008000 -e 0x00008000 -n debian_installer -d tmpkern output/uImage.buffalo.lsgl
Re: resurrecting iomega storcenter ix2 u-boot and debian November 27, 2023 01:23PM |
Registered: 9 months ago Posts: 16 |
$ sudo ./generate_disk_image.sh image file created partitioning done block devs created /boot/ formatted swap created rootfs formatted format done W: Cannot check Release signature; keyring file not available /usr/share/keyrings/debian-archive-keyring.gpg I: Retrieving InRelease I: Retrieving Packages I: Validating Packages I: Resolving dependencies of required packages... I: Resolving dependencies of base packages... I: Checking component main on http://deb.debian.org/debian... E: Couldn't find these debs: bsdextrautils debootstrap reported failure
I: Base system installed successfully. debootstrap finished fstab built network configuration created hostname set device-trees installed custom files/scripts copied user setup complete kernel install failed
Re: resurrecting iomega storcenter ix2 u-boot and debian November 27, 2023 05:48PM |
Registered: 5 years ago Posts: 255 |
if [ "$arch" == "armel" ]; then cp "../bootshim/armel_shim" "$target/boot/bootshim" chroot "$target" /bin/bash -c "wget -O /etc/apt/custom_repo.gpg https://raw.githubusercontent.com/1000001101000/Debian_on_Buffalo/master/PPA/KEY.gpg" >/dev/null 2>&1 chroot "$target" /bin/bash -c "apt-key add /etc/apt/custom_repo.gpg" >/dev/null 2>&1 echo "deb https://raw.githubusercontent.com/1000001101000/Debian_on_Buffalo/master/PPA/ $distro main" > "$target/etc/apt/sources.list.d/buffalo_kernel.list" chroot "$target" /bin/bash -c "apt-get update" >/dev/null 2>&1 chroot "$target" /bin/bash -c "export FK_IGNORE_EFI=yes; apt-get -y install linux-image-marvell-buffalo" >/dev/null 2>&1 if [ $? -ne 0 ]; then echo "kernel install failed" exit 99 fi fi
Re: resurrecting iomega storcenter ix2 u-boot and debian December 01, 2023 12:00PM |
Registered: 5 years ago Posts: 255 |
#!/bin/bash ##set some vars. target="/mnt/target" target_hostname="lsgl" #machine="Buffalo Terastation TS-XEL" #machine="Buffalo Terastation TS3400D" machine="Buffalo Linkstation Pro/Live" arch="armel" #arch="armhf" target_rootpw="changeme" target_user="debian" target_userpw="changeme" distro="bullseye" #distro="bookworm" boot_size="512" swap_size="1024" root_size="2048" use_raid="N"
Re: resurrecting iomega storcenter ix2 u-boot and debian December 01, 2023 11:29PM |
Registered: 9 months ago Posts: 16 |
Re: resurrecting iomega storcenter ix2 u-boot and debian December 15, 2023 12:11AM |
Registered: 9 months ago Posts: 16 |
setenv bootargs console=ttyS0,115200 rootdelay=30 root=PARTLABEL=ROOT setenv kaddr 2000000 ; setenv iaddr 2400000 ; tftpboot $(kaddr) bookworm/uImage.buffalo.lsgl ; tftpboot $(iaddr) orion/busyrd ; bootm $(kaddr) $(iaddr)
# cat /proc/mtd dev: size erasesize name mtd0: 00200000 00010000 "kernel" mtd1: 00180000 00010000 "cramfs" mtd2: 00080000 00010000 "bootloader"
# after fixing /etc/fstab to include definitions for /var, /run, tmp, and proper uuid for ROOT __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DHNSMR03 LE U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0 DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [4096kB@ffc00000] [0kB@fa000000] ## Unknown FLASH at fa000000: Size = 0x00000000 = 0 MB Flash: 4 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done Soc: 88F5182 A2 CPU: ARM926 (Rev 0) running @ 400Mhz Orion 1 streaming disabled SysClock = 200Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 66000000 Net: egiga0 [PRIME] Hit any key to stop autoboot: 10 Marvell>> setenv bootargs console=ttyS0,115200 rootdelay=30 root=PARTLABEL=ROOT Marvell>> setenv kaddr 2000000 ; setenv iaddr 2400000 ; tftpboot $(kaddr) buffalo/uImage.buffalo.lsgl ; tftpboot $(iaddr) orion/busyrd ; bootm $(kaddr) $(iaddr) Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'buffalo/uImage.buffalo.lsgl'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ########################################### done Bytes transferred = 3878011 (3b2c7b hex) Using egiga0 device TFTP from server 192.168.86.33; our IP address is 192.168.86.24 Filename 'orion/busyrd'. Load address: 0x2400000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 2865543 (2bb987 hex) ## Booting image at 02000000 ... Image Name: debian_installer Created: 2018-01-01 9:01:01 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3877947 Bytes = 3.7 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02400000 ... Image Name: Created: 2023-11-26 3:43:24 UTC Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 2865479 Bytes = 2.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.197 (root@11e4a3dcd714) (arm-linux-gnueabi-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #22 Sun Oct 8 02:06:18 UTC 2023 [ 0.000000] CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a005317f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Buffalo Linkstation Pro/Live [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyS0,115200 rootdelay=30 root=PARTLABEL=ROOT [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 50344K/65536K available (7576K kernel code, 1116K rwdata, 2148K rodata, 384K init, 236K bss, 15192K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 32857 entries in 97 pages [ 0.000000] ftrace: allocated 97 pages with 3 groups [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns [ 0.000021] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns [ 0.000110] Switching to timer-based delay loop, resolution 6ns [ 0.000495] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=666666) [ 0.000552] CPU: Testing write buffer coherency: ok [ 0.000913] pid_max: default: 32768 minimum: 301 [ 0.002534] LSM: Security Framework initializing [ 0.003145] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.003965] AppArmor: AppArmor initialized [ 0.004484] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.004549] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.012968] Setting up static identity map for 0x8200 - 0x823c [ 0.016593] devtmpfs: initialized [ 0.028184] VFP support v0.3: not present [ 0.028778] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.028855] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.029476] pinctrl core: initialized pinctrl subsystem [ 0.035238] NET: Registered protocol family 16 [ 0.037274] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.040603] audit: initializing netlink subsys (disabled) [ 0.043311] thermal_sys: Registered thermal governor 'fair_share' [ 0.043339] thermal_sys: Registered thermal governor 'bang_bang' [ 0.043379] thermal_sys: Registered thermal governor 'step_wise' [ 0.043414] thermal_sys: Registered thermal governor 'user_space' [ 0.043586] cpuidle: using governor ladder [ 0.043640] cpuidle: using governor menu [ 0.043905] Orion ID: MV88F5182-A2. TCLK=0. [ 0.049191] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.065106] No ATAGs? [ 0.180148] raid6: int32x8 gen() 37 MB/s [ 0.248489] raid6: int32x8 xor() 23 MB/s [ 0.316330] raid6: int32x4 gen() 40 MB/s [ 0.384491] raid6: int32x4 xor() 25 MB/s [ 0.452245] raid6: int32x2 gen() 68 MB/s [ 0.520383] raid6: int32x2 xor() 44 MB/s [ 0.588212] raid6: int32x1 gen() 85 MB/s [ 0.656339] raid6: int32x1 xor() 36 MB/s [ 0.656377] raid6: using algorithm int32x1 gen() 85 MB/s [ 0.656405] raid6: .... xor() 36 MB/s, rmw enabled [ 0.656433] raid6: using intx1 recovery algorithm [ 0.659370] SCSI subsystem initialized [ 0.661271] usbcore: registered new interface driver usbfs [ 0.661523] usbcore: registered new interface driver hub [ 0.661816] usbcore: registered new device driver usb [ 0.668020] clocksource: Switched to clocksource orion_clocksource [ 1.265156] VFS: Disk quotas dquot_6.6.0 [ 1.265437] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.268182] AppArmor: AppArmor Filesystem Enabled [ 1.273472] NET: Registered protocol family 2 [ 1.274053] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.276674] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.277336] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.277422] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.277482] TCP: Hash tables configured (established 1024 bind 1024) [ 1.277875] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.277974] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.278872] NET: Registered protocol family 1 [ 1.279001] PCI: CLS 0 bytes, default 32 [ 1.280073] Trying to unpack rootfs image as initramfs... [ 1.282607] Initramfs unpacking failed: no cpio magic [ 1.305386] Freeing initrd memory: 2800K [ 1.308826] Initialise system trusted keyrings [ 1.309424] Key type blacklist registered [ 1.310294] workingset: timestamp_bits=30 max_order=14 bucket_order=0 [ 1.339129] zbud: loaded [ 1.347784] fuse: init (API version 7.32) [ 1.349415] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1.357294] NET: Registered protocol family 38 [ 1.357388] xor: measuring software checksum speed [ 1.389942] arm4regs : 304 MB/sec [ 1.434407] 8regs : 222 MB/sec [ 1.473143] 32regs : 254 MB/sec [ 1.473179] xor: using function: arm4regs (304 MB/sec) [ 1.473329] async_tx: api initialized (async) [ 1.473397] Key type asymmetric registered [ 1.473434] Asymmetric key parser 'x509' registered [ 1.473601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.479462] orion-pinctrl f1010000.pinctrl: registered pinctrl driver [ 1.483488] mv_xor f1060900.dma-controller: Marvell shared XOR driver [ 1.544702] mv_xor f1060900.dma-controller: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.557678] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 1.562385] printk: console [ttyS0] disabled [ 1.562634] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 23, base_baud = 10416666) is a 16550A [ 2.171871] printk: console [ttyS0] enabled [ 2.178385] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 24, base_baud = 10416666) is a 16550A [ 2.226908] loop: module loaded [ 2.231641] sata_mv sata_mv.0: cannot get optional clkdev [ 2.238107] sata_mv sata_mv.0: slots 32 ports 2 [ 2.256713] scsi host0: sata_mv [ 2.262639] scsi host1: sata_mv [ 2.266918] ata1: SATA max UDMA/133 irq 28 [ 2.271105] ata2: SATA max UDMA/133 irq 28 [ 2.287734] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing. [ 2.295753] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 2.304287] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.310937] ehci-pci: EHCI PCI platform driver [ 2.315638] ehci-orion: EHCI orion driver [ 2.320244] orion-ehci f1050000.ehci: EHCI Host Controller [ 2.325886] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 2.334167] orion-ehci f1050000.ehci: irq 26, io mem 0xf1050000 [ 2.356130] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 2.363260] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.371604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.378883] usb usb1: Product: EHCI Host Controller [ 2.383821] usb usb1: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.389456] usb usb1: SerialNumber: f1050000.ehci [ 2.396377] hub 1-0:1.0: USB hub found [ 2.400434] hub 1-0:1.0: 1 port detected [ 2.406050] orion-ehci f10a0000.ehci: EHCI Host Controller [ 2.411812] orion-ehci f10a0000.ehci: new USB bus registered, assigned bus number 2 [ 2.420284] orion-ehci f10a0000.ehci: irq 30, io mem 0xf10a0000 [ 2.440127] orion-ehci f10a0000.ehci: USB 2.0 started, EHCI 1.00 [ 2.447046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.455385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.462664] usb usb2: Product: EHCI Host Controller [ 2.467605] usb usb2: Manufacturer: Linux 5.10.197 ehci_hcd [ 2.473239] usb usb2: SerialNumber: f10a0000.ehci [ 2.480359] hub 2-0:1.0: USB hub found [ 2.484319] hub 2-0:1.0: 1 port detected [ 2.490346] usbcore: registered new interface driver usb-storage [ 2.496964] i2c /dev entries driver [ 2.502856] rtc-rs5c372 0-0032: can't read registers [ 2.508069] rtc-rs5c372: probe of 0-0032 failed with error -5 [ 2.520356] device-mapper: uevent: version 1.0.3 [ 2.526399] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 2.536978] device-mapper: multipath round-robin: version 1.2.0 loaded [ 2.543696] device-mapper: multipath queue-length: version 0.2.0 loaded [ 2.550449] device-mapper: multipath service-time: version 0.3.0 loaded [ 2.557533] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 2.563787] device-mapper: raid: Loading target version 1.15.1 [ 2.570496] ledtrig-cpu: registered to indicate activity on CPUs [ 2.584412] marvell-cesa mv_crypto: CESA device successfully registered [ 2.593295] physmap-flash f4000000.flash: physmap platform flash device: [mem 0xf4000000-0xf403ffff] [ 2.602815] physmap-flash f4000000.flash: map_probe failed [ 2.608429] ata1: SATA link down (SStatus 0 SControl 300) [ 2.619676] NET: Registered protocol family 10 [ 2.637548] Segment Routing with IPv6 [ 2.642032] NET: Registered protocol family 17 [ 2.647720] registered taskstats version 1 [ 2.651927] Loading compiled-in X.509 certificates [ 2.657928] AppArmor: AppArmor sha1 policy hashing enabled [ 2.670705] Waiting 30 sec before mounting root device... [ 2.744137] usb 2-1: new high-speed USB device number 2 using orion-ehci [ 2.906623] usb 2-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00 [ 2.914907] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.922149] usb 2-1: Product: SanDisk 3.2Gen1 [ 2.926662] usb 2-1: Manufacturer: USB [ 2.930570] usb 2-1: SerialNumber: 0401c9ec929f82413dc9ddd2be232e7373c0a8f97c3559e50f8c377c3ee63e3d3ad0000000000000000000007f4b4c0800002b1883558107b0ad0502 [ 2.944598] ata2: SATA link down (SStatus 0 SControl 300) [ 2.952533] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.960724] scsi host2: usb-storage 2-1:1.0 [ 3.974205] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 3.986500] sd 2:0:0:0: [sda] 60125184 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 3.994528] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 4.001863] sd 2:0:0:0: [sda] Write Protect is off [ 4.008289] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.048992] sda: sda1 sda2 [ 4.062752] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 33.764121] md: Waiting for all devices to be available before autodetect [ 33.770978] md: If you don't use raid, use raid=noautodetect [ 33.776772] md: Autodetecting RAID arrays. [ 33.780933] md: autorun ... [ 33.783738] md: ... autorun DONE. [ 33.819406] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 33.827374] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 33.854539] Freeing unused kernel memory: 384K [ 33.859050] Kernel memory protection not selected by kernel config. [ 33.865381] Run /sbin/init as init process [ 34.710024] systemd[1]: System time before build time, advancing clock. [ 34.928578] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 34.961867] systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 12 (bookworm)! [ 35.002924] systemd[1]: Hostname set to <ix2>. [ 39.788628] random: crng init done [ 40.761442] systemd[1]: Queued start job for default target graphical.target. [ 40.797277] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ OK ] Created slice system-getty.slice - Slice /system/getty. [ 40.832115] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe. [ 40.863951] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ OK ] Created slice system-seria… - Slice /system/serial-getty. [ 40.897451] systemd[1]: Created slice user.slice - User and Session Slice. [ OK ] Created slice user.slice - User and Session Slice. [ 40.922327] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ OK ] Started systemd-ask-passwo…quests to Console Directory Watch. [ 40.954339] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch. [ 40.989328] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount proc-sys-…rmats File System Automount Point. [ 41.022103] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes. [ 41.049918] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ OK ] Reached target integrityse…Local Integrity Protected Volumes. [ 41.078083] systemd[1]: Reached target paths.target - Path Units. [ OK ] Reached target paths.target - Path Units. [ 41.101664] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ OK ] Reached target remote-fs.target - Remote File Systems. [ 41.129295] systemd[1]: Reached target slices.target - Slice Units. [ OK ] Reached target slices.target - Slice Units. [ 41.153508] systemd[1]: Reached target swap.target - Swaps. [ OK ] Reached target swap.target - Swaps. [ 41.177543] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes. [ 41.206776] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe. [ 41.238695] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ OK ] Listening on systemd-journ…socket - Journal Audit Socket. [ 41.268495] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log). [ 41.300671] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ OK ] Listening on systemd-journald.socket - Journal Socket. [ 41.337688] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ OK ] Listening on systemd-udevd….socket - udev Control Socket. [ 41.368181] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket. [ 41.397148] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 41.429561] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... Mounting dev-mqueue.mount\x80\xa6POSIX Message Queue File System... [ 41.499451] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... Mounting sys-kernel-debug.… - Kernel Debug File System... [ 41.613690] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... Mounting sys-kernel-tracin… - Kernel Trace File System... [ 41.664306] systemd[1]: kmod-static-nodes.service - Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/5.10.197/modules.devname). [ 41.722023] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... Starting modprobe@configfs…m - Load Kernel Module configfs... [ 41.794935] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod... [ 41.890811] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... Starting modprobe@drm.service - Load Kernel Module drm... [ 41.986763] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... Starting modprobe@efi_psto…- Load Kernel Module efi_pstore... [ 42.089832] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... Starting modprobe@fuse.ser…e - Load Kernel Module fuse... [ 42.182791] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... Starting modprobe@loop.ser…e - Load Kernel Module loop... [ 42.244282] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 42.272321] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 42.319832] systemd[1]: Starting systemd-journald.service - Journal Service... Starting systemd-journald.service - Journal Service... [ 42.411195] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... Starting systemd-modules-l…rvice - Load Kernel Modules... [ 42.515374] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... Starting systemd-remount-f…nt Root and Kernel File Systems... [ 42.646145] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... Starting systemd-udev-trig…[0m - Coldplug All udev Devices... [ 42.933014] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ OK ] Mounted dev-mqueue.mountOSIX Message Queue File System. [ 42.994919] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System. [ 43.055000] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System. [ 43.144845] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 43.204578] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs. [ 43.290790] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 43.336648] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod. [ 43.406785] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 43.453349] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm. [ 43.550013] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 43.592654] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore. [ 43.669579] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 43.716626] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse. [ 43.788005] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 43.848717] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop. [ 43.920483] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules. [ 44.061862] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 44.109243] EXT4-fs (sda1): re-mounted. Opts: (null) Mounting sys-fs-fuse-conne… - FUSE Control File System... [ 44.210309] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... Mounting sys-kernel-config…ernel Configuration File System... [ 44.282144] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 44.410249] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... Starting systemd-sysctl.se…ce - Apply Kernel Variables... [ 44.737211] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems. [ 44.791822] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System. [ 44.846839] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System. [ 44.903604] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 44.957769] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 45.102555] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... Starting systemd-random-se…ice - Load/Save Random Seed... [ 45.254388] systemd[1]: Starting systemd-sysusers.service - Create System Users... Starting systemd-sysusers.…rvice - Create System Users... [ 45.360516] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables. [ 45.968631] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed. [ 46.022470] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 46.229498] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ OK ] Finished systemd-sysusers.service - Create System Users. [ 46.329471] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... Starting systemd-tmpfiles-…ate Static Device Nodes in /dev... [ 47.212492] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev. [ 47.266700] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. [ OK ] Reached target local-fs-pr…reparation for Local File Systems. [ 47.321207] systemd[1]: Reached target local-fs.target - Local File Systems. [ OK ] Reached target local-fs.target - Local File Systems. [ 47.354215] systemd[1]: mdadm-shutdown.service - Prepare mdadm shutdown initramfs was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/dracut). [ 47.437543] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... Starting systemd-binfmt.se…et Up Additional Binary Formats... [ 47.473661] systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id). [ 47.550492] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... Starting systemd-udevd.ser…ger for Device Events and Files... [ 47.622577] systemd[1]: Started systemd-journald.service - Journal Service. [ OK ] Started systemd-journald.service - Journal Service. [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices. Starting ifupdown-pre.serv…ynchronize boot up for ifupdown... Starting systemd-journal-f…h Journal to Persistent Storage... [ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown. Mounting proc-sys-fs-binfm…utable File Formats File System... Starting networking.service - Raise network interfaces... [FAILED] Failed to mount proc-sys-f…ecutable File Formats File System. See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details. [ 48.799567] systemd-journald[116]: Received client request to flush runtime journal. Mounting proc-sys-fs-binfm…utable File Formats File System... [FAILED] Failed to mount proc-sys-f…ecutable File Formats File System. See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details. Mounting proc-sys-fs-binfm…utable File Formats File System... [FAILED] Failed to mount proc-sys-f…ecutable File Formats File System. See 'systemctl status proc-sys-fs-binfmt_misc.mount' for details. [FAILED] Failed to start systemd-bi… Set Up Additional Binary Formats. See 'systemctl status systemd-binfmt.service' for details. [ OK ] Finished networking.service - Raise network interfaces. [ OK ] Reached target network.target - Network. [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage. Starting systemd-tmpfiles-… Volatile Files and Directories... [ OK ] Started systemd-udevd.serv…nager for Device Events and Files. [ OK ] Found device dev-ttyS0.device - /dev/ttyS0. [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories. [ OK ] Started haveged.serviceon based on the HAVEGE algorithm. Starting systemd-update-ut…rd System Boot/Shutdown in UTMP... [* ] Job systemd-update-utmp.service/start running (16s / no limit) [** ] Job systemd-update-utmp.service/start running (16s / no limit) [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP. [ OK ] Reached target sysinit.target - System Initialization. [ OK ] Started apt-daily.timer - Daily apt download activities. [ OK ] Started apt-daily-upgrade.… apt upgrade and clean activities. [ OK ] Started dpkg-db-backup.tim… Daily dpkg database backup timer. [ OK ] Started e2scrub_all.timer\x80\xa6etadata Check for All Filesystems. [ OK ] Started fstrim.timer - Discard unused blocks once a week. [ OK ] Started logrotate.timer - Daily rotation of log files. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories. [ OK ] Reached target timers.target - Timer Units. [ OK ] Listening on dbus.socket-Bus System Message Bus Socket. [ OK ] Reached target sockets.target - Socket Units. [ OK ] Reached target basic.target - Basic System. [ OK ] Started cron.service -…kground program processing daemon. Starting dbus.service - D-Bus System Message Bus... Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots... Starting ssh.service - OpenBSD Secure Shell server... Starting systemd-logind.se…ice - User Login Management... Starting systemd-user-sess…vice - Permit User Sessions... [ OK ] Started dbus.service - D-Bus System Message Bus. [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions. [ OK ] Started serial-getty@ttyS0…rvice - Serial Getty on ttyS0. [ OK ] Reached target getty.target - Login Prompts. [ OK ] Started ssh.service - OpenBSD Secure Shell server. Debian GNU/Linux 12 ix2 ttyS0 ix2 login: root Password: Linux ix2 5.10.197 #22 Sun Oct 8 02:06:18 UTC 2023 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@ix2:~# root@ix2:~# cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 12 (bookworm)" NAME="Debian GNU/Linux" VERSION_ID="12" VERSION="12 (bookworm)" VERSION_CODENAME=bookworm ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/"
Re: resurrecting iomega storcenter ix2 u-boot and debian December 15, 2023 09:20AM |
Registered: 5 years ago Posts: 255 |
Re: resurrecting iomega storcenter ix2 u-boot and debian December 15, 2023 02:24PM |
Admin Registered: 13 years ago Posts: 18,821 |
help help mii help mdioBelow should be the format (I'm typing from memory so the parameter might not be accurate).
mii info mdio list
Re: resurrecting iomega storcenter ix2 u-boot and debian December 15, 2023 05:42PM |
Registered: 9 months ago Posts: 16 |
U-Boot 1.1.1 (Jun 3 2007 - 20:44:19) USI u-boot-1.1.1-DHNSMR03/04-v3.1.0.0
Kernel command line: root=/dev/mtdblock1 ro rootfstype=cramfs devfs=mount console=ttyS0,115200 init=/crmfsinit
Marvell>> flinfo Bank # 1: AMD AM29LV320 (32Mbit = 4M x 8) Size: 4 MB,Bus Width: 1, device Width: 1. Flash base: 0xffc00000,Number of Sectors: 64 Type: REGULAR. Sector Start Addresses: 00000000 00010000 00020000 00030000 00040000 00050000 00060000 00070000 00080000 00090000 000a0000 000b0000 000c0000 000d0000 000e0000 000f0000 00100000 00110000 00120000 00130000 00140000 00150000 00160000 00170000 00180000 00190000 001a0000 001b0000 001c0000 001d0000 001e0000 001f0000 00200000 00210000 00220000 00230000 00240000 00250000 00260000 00270000 00280000 00290000 002a0000 002b0000 002c0000 002d0000 002e0000 002f0000 00300000 00310000 00320000 00330000 00340000 00350000 00360000 00370000 00380000 (RO) 00390000 (RO) 003a0000 (RO) 003b0000 (RO) 003c0000 (RO) 003d0000 (RO) 003e0000 (RO) 003f0000 (RO) Bank # 2: missing or unknown FLASH type
/dts-v1/; / { #address-cells = <0x01>; #size-cells = <0x01>; model = "Buffalo Linkstation Pro/Live"; compatible = "buffalo,lsgl\0marvell,orion5x-88f5182\0marvell,orion5x"; interrupt-parent = <0x01>; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = "/soc/internal-regs/serial@12000"; }; aliases { gpio0 = "/soc/internal-regs/gpio@10100"; }; memory { device_type = "memory"; reg = <0x00 0x4000000>; }; soc { #address-cells = <0x02>; #size-cells = <0x01>; controller = <0x02>; compatible = "marvell,orion5x-88f5182-mbus\0simple-bus"; ranges = <0xf0010000 0x00 0xf1000000 0x100000 0x9000000 0x00 0xf2200000 0x800 0x10f0000 0x00 0xf4000000 0x40000>; devbus-bootcs { compatible = "marvell,orion-devbus"; reg = <0xf0010000 0x1046c 0x04>; ranges = <0x00 0x10f0000 0x00 0xffffffff>; #address-cells = <0x01>; #size-cells = <0x01>; clocks = <0x03 0x00>; status = "okay"; devbus,keep-config; flash@0 { compatible = "jedec-flash"; reg = <0x00 0x40000>; bank-width = <0x01>; partitions { compatible = "fixed-partitions"; #address-cells = <0x01>; #size-cells = <0x01>; header@0 { reg = <0x00 0x30000>; read-only; }; uboot@30000 { reg = <0x30000 0xf000>; read-only; }; uboot_env@3F000 { reg = <0x3f000 0x1000>; }; }; }; }; devbus-cs0 { compatible = "marvell,orion-devbus"; reg = <0xf0010000 0x1045c 0x04>; ranges = <0x00 0x11e0000 0x00 0xffffffff>; #address-cells = <0x01>; #size-cells = <0x01>; clocks = <0x03 0x00>; status = "disabled"; }; devbus-cs1 { compatible = "marvell,orion-devbus"; reg = <0xf0010000 0x10460 0x04>; ranges = <0x00 0x11d0000 0x00 0xffffffff>; #address-cells = <0x01>; #size-cells = <0x01>; clocks = <0x03 0x00>; status = "disabled"; }; devbus-cs2 { compatible = "marvell,orion-devbus"; reg = <0xf0010000 0x10464 0x04>; ranges = <0x00 0x11b0000 0x00 0xffffffff>; #address-cells = <0x01>; #size-cells = <0x01>; clocks = <0x03 0x00>; status = "disabled"; }; internal-regs { compatible = "simple-bus"; #address-cells = <0x01>; #size-cells = <0x01>; ranges = <0x00 0xf0010000 0x00 0x100000>; gpio@10100 { compatible = "marvell,orion-gpio"; #gpio-cells = <0x02>; gpio-controller; reg = <0x10100 0x40>; ngpios = <0x20>; interrupt-controller; #interrupt-cells = <0x02>; interrupts = <0x06 0x07 0x08 0x09>; phandle = <0x09>; }; spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <0x01>; #size-cells = <0x00>; cell-index = <0x00>; reg = <0x10600 0x28>; status = "disabled"; }; i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <0x01>; #size-cells = <0x00>; interrupts = <0x05>; clocks = <0x03 0x00>; status = "okay"; rtc@32 { compatible = "ricoh,rs5c372a"; reg = <0x32>; }; }; serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <0x02>; interrupts = <0x03>; clocks = <0x03 0x00>; status = "okay"; }; serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <0x02>; interrupts = <0x04>; clocks = <0x03 0x00>; status = "okay"; }; bridge-interrupt-ctrl@20110 { compatible = "marvell,orion-bridge-intc"; interrupt-controller; #interrupt-cells = <0x01>; reg = <0x20110 0x08>; interrupts = <0x00>; marvell,#interrupts = <0x04>; phandle = <0x04>; }; interrupt-controller@20200 { compatible = "marvell,orion-intc"; interrupt-controller; #interrupt-cells = <0x01>; reg = <0x20200 0x08>; phandle = <0x01>; }; timer@20300 { compatible = "marvell,orion-timer"; reg = <0x20300 0x20>; interrupt-parent = <0x04>; interrupts = <0x01 0x02>; clocks = <0x03 0x00>; }; wdt@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28 0x20108 0x04>; interrupt-parent = <0x04>; interrupts = <0x03>; clocks = <0x03 0x00>; status = "disabled"; }; ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <0x11>; status = "okay"; }; dma-controller@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; status = "okay"; xor00 { interrupts = <0x1e>; dmacap,memcpy; dmacap,xor; }; xor01 { interrupts = <0x1f>; dmacap,memcpy; dmacap,xor; dmacap,memset; }; }; ethernet-controller@72000 { compatible = "marvell,orion-eth"; #address-cells = <0x01>; #size-cells = <0x00>; reg = <0x72000 0x4000>; marvell,tx-checksum-limit = <0x640>; status = "okay"; ethernet-port@0 { compatible = "marvell,orion-eth-port"; reg = <0x00>; interrupts = <0x15>; mac-address = [ 00 D0 B8 02 78 63 ]; phy-handle = <0x05>; }; }; mdio-bus@72004 { compatible = "marvell,orion-mdio"; #address-cells = <0x01>; #size-cells = <0x00>; reg = <0x72004 0x84>; interrupts = <0x16>; status = "okay"; ethernet-phy { reg = <0x08>; phandle = <0x05>; }; }; sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <0x1d>; status = "okay"; nr-ports = <0x02>; }; crypto@90000 { compatible = "marvell,orion-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; interrupts = <0x1c>; marvell,crypto-srams = <0x06>; marvell,crypto-sram-size = <0x800>; status = "okay"; }; ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; interrupts = <0x0c>; status = "okay"; }; pinctrl@10000 { compatible = "marvell,88f5182-pinctrl"; reg = <0x10000 0x08 0x10050 0x04>; pmx-sata0 { marvell,pins = "mpp12\0mpp14"; marvell,function = "sata0"; }; pmx-sata1 { marvell,pins = "mpp13\0mpp15"; marvell,function = "sata1"; }; pmx-power-hdd { marvell,function = "gpio"; marvell,pins = "mpp1"; phandle = <0x08>; }; pmx-power-usb { marvell,function = "gpio"; marvell,pins = "mpp9"; phandle = <0x07>; }; }; core-clocks@10030 { compatible = "marvell,mv88f5182-core-clock"; reg = <0x10010 0x04>; #clock-cells = <0x01>; phandle = <0x03>; }; mbus-controller@20000 { compatible = "marvell,mbus-controller"; reg = <0x20000 0x100 0x1500 0x20>; phandle = <0x02>; }; }; sa-sram { compatible = "mmio-sram"; reg = <0x9000000 0x00 0x800>; #address-cells = <0x01>; #size-cells = <0x01>; phandle = <0x06>; }; }; restart_poweroff { compatible = "restart-poweroff"; }; regulators { compatible = "simple-bus"; #address-cells = <0x01>; #size-cells = <0x00>; pinctrl-0 = <0x07 0x08>; pinctrl-names = "default"; regulator@1 { compatible = "regulator-fixed"; reg = <0x01>; regulator-name = "USB Power"; regulator-min-microvolt = <0x4c4b40>; regulator-max-microvolt = <0x4c4b40>; enable-active-high; regulator-always-on; regulator-boot-on; gpios = <0x09 0x09 0x00>; }; regulator@2 { compatible = "regulator-fixed"; reg = <0x02>; regulator-name = "HDD Power"; regulator-min-microvolt = <0x4c4b40>; regulator-max-microvolt = <0x4c4b40>; enable-active-high; regulator-always-on; regulator-boot-on; gpios = <0x09 0x01 0x00>; }; }; };
Re: resurrecting iomega storcenter ix2 u-boot and debian December 15, 2023 06:03PM |
Admin Registered: 13 years ago Posts: 18,821 |
Quote
Honestly this is the first think I'd like to fix on this board:
ethernet-phy { reg = <0x08>; phandle = <0x05>; };
Quote
[ 2.285815] mdio_bus f1072004.mdio-bus-mii: MDIO device at address 8 is missing.
Quote
For the ethernet you probably need to adjust the device-tree. Most of these Marvell SoCs have 2 ethernet ports, it’s possible Buffalo used port1 and iomega used port2 or vice versa.
printenv ethact
Re: resurrecting iomega storcenter ix2 u-boot and debian December 16, 2023 10:46PM |
Registered: 9 months ago Posts: 16 |
Re: resurrecting iomega storcenter ix2 u-boot and debian December 17, 2023 12:10AM |
Admin Registered: 13 years ago Posts: 18,821 |