Re: NSA 320 possible messedup Env March 01, 2024 09:16PM |
Admin Registered: 14 years ago Posts: 19,325 |
Server listening on TCP port 5001 TCP window size: 208 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.70 port 5001 connected with 192.168.178.137 port 37054 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 723 MBytes 606 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 867 MByte ------------------------------------------------------------ [ 4] local 192.168.178.116 port 59641 connected with 192.168.178.137 port 5001 [ 4] 0.0-10.0 sec 870 MBytes 728 Mbits/sec
ifconfig -a
# iperf -c 192.168.7.201 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.7.201, TCP port 5001 TCP window size: 117 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.7.17 port 33542 connected with 192.168.7.201 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 857 MBytes 719 Mbits/sec [ 5] local 192.168.7.17 port 5001 connected with 192.168.7.201 port 47774 [ 5] 0.0-10.0 sec 734 MBytes 615 Mbits/sec
Re: NSA 320 possible messedup Env March 02, 2024 10:27AM |
Registered: 11 months ago Posts: 52 |
root@Vault-111:~# ifconfig -a eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.178.137 netmask 255.255.255.0 broadcast 192.168.178.255 ether c8:6c:87:9b:2f:78 txqueuelen 1000 (Ethernet) RX packets 123411 bytes 8128173 (7.7 MiB) RX errors 1233 dropped 1774 overruns 0 frame 0 TX packets 526296 bytes 794200547 (757.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 36 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 203 bytes 81922 (80.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 203 bytes 81922 (80.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@Vault-111:~#
root@Vault-111:~# iperf -c 192.168.178.70 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.178.70, TCP port 5001 TCP window size: 262 KByte (default) ------------------------------------------------------------ [ 5] local 192.168.178.137 port 57056 connected with 192.168.178.70 port 5001 [ ID] Interval Transfer Bandwidth [ 5] 0.0-10.7 sec 48.0 MBytes 37.5 Mbits/sec
C:\Users\Admin\Desktop\iperf-2.0.9-win64>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 208 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.70 port 5001 connected with 192.168.178.137 port 57056 [ ID] Interval Transfer Bandwidth [ 4] 0.0-94.1 sec 48.0 MBytes 4.28 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 867 MByte ------------------------------------------------------------ [ 4] local 192.168.178.70 port 60852 connected with 192.168.178.137 port 5001 [ 4] 0.0-10.1 sec 886 MBytes 738 Mbits/sec
root@Vault-111:~# iperf -c 192.168.178.70 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.178.70, TCP port 5001 TCP window size: 131 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.178.137 port 57074 connected with 192.168.178.70 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 754 MBytes 632 Mbits/sec [ 5] local 192.168.178.137 port 5001 connected with 192.168.178.70 port 60877
C:\Users\Admin\Desktop\iperf-2.0.9-win64>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 208 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.70 port 5001 connected with 192.168.178.137 port 57074 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 754 MBytes 631 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 867 MByte ------------------------------------------------------------ [ 4] local 192.168.178.70 port 60877 connected with 192.168.178.137 port 5001 [ 4] 0.0-10.1 sec 878 MBytes 731 Mbits/sec
Re: NSA 320 possible messedup Env March 02, 2024 02:04PM |
Registered: 10 years ago Posts: 467 |
Re: NSA 320 possible messedup Env March 02, 2024 02:18PM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 03, 2024 05:52AM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 03, 2024 02:03PM |
Admin Registered: 14 years ago Posts: 19,325 |
Re: NSA 320 possible messedup Env March 03, 2024 03:03PM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 04, 2024 08:15AM |
Registered: 11 months ago Posts: 52 |
root@Vault-111:~# iperf -c 192.168.178.140 -r ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 280 KByte (default) ------------------------------------------------------------ [ 5] local 192.168.178.137 port 39298 connected with 192.168.178.140 port 5001 [ ID] Interval Transfer Bandwidth [ 5] 0.0-10.0 sec 747 MBytes 626 Mbits/sec [ 4] local 192.168.178.137 port 5001 connected with 192.168.178.140 port 52628 [ 4] 0.0-10.0 sec 79.6 MBytes 66.7 Mbits/sec root@Vault-111:~#
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 5001 connected with 192.168.178.137 port 39298 (icwnd/mss/irtt=14/1448/2086) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0064 sec 747 MBytes 626 Mbits/sec ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ *2] local 192.168.178.140 port 52628 connected with 192.168.178.137 port 5001 (reverse) (icwnd/mss/irtt=14/1448/1674) [ ID] Interval Transfer Bandwidth [ *2] 0.0000-10.0244 sec 79.6 MBytes 66.6 Mbits/sec
root@Vault-111:~# speedtest Speedtest by Ookla Server: Drahtlos-DSL GmbH Mittelsachsen - Leipzig (id: 38032) ISP: PYUR Idle Latency: 16.33 ms (jitter: 1.21ms, low: 14.74ms, high: 18.97ms) Download: 3.92 Mbps (data used: 7.2 MB) 15.56 ms (jitter: 16.17ms, low: 9.01ms, high: 266.24ms) Upload: 52.44 Mbps (data used: 23.7 MB) 10.25 ms (jitter: 7.00ms, low: 8.61ms, high: 232.78ms) Packet Loss: 0.0% Result URL: https://www.speedtest.net/result/c/d31cc0d7-7727-4cc8-9e4f-7178141bd0a8 root@Vault-111:~#
root@debianVM:/home/administrator# sudo speedtest Speedtest by Ookla Server: NU Informationssysteme GmbH - Leipzig (id: 31449) ISP: PYUR Idle Latency: 15.17 ms (jitter: 0.31ms, low: 14.96ms, high: 15.50ms) Download: 750.71 Mbps (data used: 737.2 MB) 31.19 ms (jitter: 9.62ms, low: 14.84ms, high: 83.70ms) Upload: 51.57 Mbps (data used: 35.4 MB) 13.37 ms (jitter: 5.08ms, low: 12.35ms, high: 252.18ms) Packet Loss: 1.3% Result URL: https://www.speedtest.net/result/c/6f0869c3-1837-4c17-82fa-e79375b66b9e root@debianVM:/home/administrator#
Re: NSA 320 possible messedup Env March 04, 2024 03:58PM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 04, 2024 04:29PM |
Admin Registered: 14 years ago Posts: 19,325 |
ifconfig -a ethtool eth0 ethtool -k eth0 | grep tcp-segment
iperf -s
iperf -c 192.168.178.140
Re: NSA 320 possible messedup Env March 04, 2024 04:49PM |
Registered: 11 months ago Posts: 52 |
root@Vault-111:~# ifconfig -a eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.178.137 netmask 255.255.255.0 broadcast 192.168.178.255 ether c8:6c:87:9b:2f:78 txqueuelen 1000 (Ethernet) RX packets 629922 bytes 370179333 (353.0 MiB) RX errors 24205 dropped 68347 overruns 0 frame 0 TX packets 1355134 bytes 1883042200 (1.7 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 36 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 17481 bytes 6975338 (6.6 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 17481 bytes 6975338 (6.6 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@Vault-111:~#
root@Vault-111:~# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: g Link detected: yes root@Vault-111:~#
root@Vault-111:~# ethtool -k eth0 | grep tcp-segment tcp-segmentation-offload: off tx-tcp-segmentation: off [fixed] root@Vault-111:~#
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 5001 connected with 192.168.178.137 port 41324 (icwnd/mss/irtt=14/1448/1992) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0104 sec 771 MBytes 646 Mbits/sec
root@Vault-111:~# iperf -c 192.168.178.140 ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.178.137 port 41324 connected with 192.168.178.140 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 771 MBytes 647 Mbits/sec root@Vault-111:~#
Re: NSA 320 possible messedup Env March 04, 2024 04:54PM |
Admin Registered: 14 years ago Posts: 19,325 |
iperf -sOn the Debian VM (192.168.178.140)
iperf -c 192.168.178.137
Re: NSA 320 possible messedup Env March 04, 2024 05:02PM |
Registered: 11 months ago Posts: 52 |
root@debianVM:/home/administrator# iperf -c 192.168.178.137 ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 57324 connected with 192.168.178.137 port 5001 (icwnd/mss/irtt=14/1448/1401) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0320 sec 128 MBytes 107 Mbits/sec root@debianVM:/home/administrator#
root@Vault-111:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.137 port 5001 connected with 192.168.178.140 port 57324 (peer 2.1.8) [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 128 MBytes 107 Mbits/sec
Re: NSA 320 possible messedup Env March 04, 2024 05:10PM |
Admin Registered: 14 years ago Posts: 19,325 |
root@Vault-111:~# ethtool -k eth0 | grep tcp-segment tcp-segmentation-offload: off tx-tcp-segmentation: off [fixed]
ethtool -K eth0 tso on sg on
Re: NSA 320 possible messedup Env March 04, 2024 05:49PM |
Registered: 11 months ago Posts: 52 |
> ethtool -K eth0 tso on sg on >>
root@Vault-111:~# ethtool -K eth0 tso on sg on Cannot change tcp-segmentation-offload Could not change any device features root@Vault-111:~#
Re: NSA 320 possible messedup Env March 04, 2024 05:53PM |
Admin Registered: 14 years ago Posts: 19,325 |
ethtool -K eth0 tso on
Re: NSA 320 possible messedup Env March 04, 2024 05:54PM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 04, 2024 07:36PM |
Admin Registered: 14 years ago Posts: 19,325 |
Re: NSA 320 possible messedup Env March 04, 2024 07:54PM |
Registered: 11 months ago Posts: 52 |
Re: NSA 320 possible messedup Env March 04, 2024 10:14PM |
Admin Registered: 14 years ago Posts: 19,325 |
dmesg
Re: NSA 320 possible messedup Env March 07, 2024 06:43AM |
Registered: 11 months ago Posts: 52 |
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 5001 connected with 192.168.178.137 port 44430 (icwnd/mss/irtt=14/1448/2145) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0211 sec 391 MBytes 327 Mbits/sec
root@Vault-111:~# iperf -c 192.168.178.140 ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 43.8 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.178.137 port 44430 connected with 192.168.178.140 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 391 MBytes 328 Mbits/sec root@Vault-111:~#
root@debianVM:/home/administrator# iperf -c 192.168.178.137 ------------------------------------------------------------ Client connecting to 192.168.178.137, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 37128 connected with 192.168.178.137 port 5001 (icwnd/mss/irtt=14/1448/1608) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0229 sec 130 MBytes 109 Mbits/sec root@debianVM:/home/administrator#
root@Vault-111:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 4] local 192.168.178.137 port 5001 connected with 192.168.178.140 port 37128 (peer 2.1.8) [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 130 MBytes 109 Mbits/sec
root@Vault-111:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.2.9-kirkwood-tld-1 (root@tldDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 PREEMPT Sat Aug 17 15:00:56 PDT 2019 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Zyxel NSA320 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootd elay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock) init=/bin/s ystemd [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 494676K/524288K available (9216K kernel code, 868K rwdata , 3400K rodata, 1024K init, 301K bss, 29612K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u32 called from cache_alloc_refill+0x38c/0x928 with crng_init=0 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.000048] Switching to timer-based delay loop, resolution 5ns [ 0.000800] Console: colour dummy device 80x30 [ 0.000851] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000877] pid_max: default: 32768 minimum: 301 [ 0.001249] LSM: Security Framework initializing [ 0.001432] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001460] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002312] *** VALIDATE proc *** [ 0.002569] *** VALIDATE cgroup1 *** [ 0.002595] *** VALIDATE cgroup2 *** [ 0.002692] CPU: Testing write buffer coherency: ok [ 0.004379] Setting up static identity map for 0x100000 - 0x100058 [ 0.004701] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.004984] rcu: Hierarchical SRCU implementation. [ 0.008304] devtmpfs: initialized [ 0.014619] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.014651] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.014892] xor: measuring software checksum speed [ 0.110118] arm4regs : 1089.200 MB/sec [ 0.210071] 8regs : 654.000 MB/sec [ 0.310072] 32regs : 950.400 MB/sec [ 0.310091] xor: using function: arm4regs (1089.200 MB/sec) [ 0.310112] prandom: seed boundary self test passed [ 0.314287] prandom: 100 self tests passed [ 0.314299] pinctrl core: initialized pinctrl subsystem [ 0.315719] NET: Registered protocol family 16 [ 0.316298] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.317096] audit: initializing netlink subsys (disabled) [ 0.318335] audit: type=2000 audit(0.310:1): state=initialized audit_enabled= 0 res=1 [ 0.318454] cpuidle: using governor ladder [ 0.318531] cpuidle: using governor menu [ 0.319114] Feroceon L2: Enabling L2 [ 0.319165] Feroceon L2: Cache support initialised. [ 0.325483] No ATAGs? [ 2.560055] random: fast init done [ 6.252353] alg: No test for lzo-rle (lzo-rle-generic) [ 6.252711] alg: No test for lzo-rle (lzo-rle-scomp) [ 6.430670] raid6: int32x8 gen() 128 MB/s [ 6.600321] raid6: int32x8 xor() 86 MB/s [ 6.770540] raid6: int32x4 gen() 129 MB/s [ 6.940235] raid6: int32x4 xor() 84 MB/s [ 7.110192] raid6: int32x2 gen() 133 MB/s [ 7.280194] raid6: int32x2 xor() 94 MB/s [ 7.450399] raid6: int32x1 gen() 100 MB/s [ 7.620404] raid6: int32x1 xor() 69 MB/s [ 7.620416] raid6: using algorithm int32x2 gen() 133 MB/s [ 7.620424] raid6: .... xor() 94 MB/s, rmw enabled [ 7.620433] raid6: using intx1 recovery algorithm [ 7.620688] vgaarb: loaded [ 7.621194] SCSI subsystem initialized [ 7.621436] libata version 3.00 loaded. [ 7.621691] usbcore: registered new interface driver usbfs [ 7.621761] usbcore: registered new interface driver hub [ 7.621847] usbcore: registered new device driver usb [ 7.622027] pps_core: LinuxPPS API ver. 1 registered [ 7.622039] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 7.622067] PTP clock support registered [ 7.623399] clocksource: Switched to clocksource orion_clocksource [ 8.654583] VFS: Disk quotas dquot_6.6.0 [ 8.654682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 8.664511] NET: Registered protocol family 2 [ 8.665334] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 8.665370] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 8.665428] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 8.665481] TCP: Hash tables configured (established 4096 bind 4096) [ 8.665576] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 8.665604] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 8.665833] NET: Registered protocol family 1 [ 8.666474] RPC: Registered named UNIX socket transport module. [ 8.666488] RPC: Registered udp transport module. [ 8.666497] RPC: Registered tcp transport module. [ 8.666506] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 8.666521] PCI: CLS 0 bytes, default 32 [ 8.666764] Trying to unpack rootfs image as initramfs... [ 9.508407] Freeing initrd memory: 9488K [ 9.508615] NetWinder Floating Point Emulator V0.97 (double precision) [ 9.509830] Initialise system trusted keyrings [ 9.509881] Key type blacklist registered [ 9.510100] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 9.510212] zbud: loaded [ 9.511316] NFS: Registering the id_resolver key type [ 9.511345] Key type id_resolver registered [ 9.511355] Key type id_legacy registered [ 9.511375] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 9.511393] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.511687] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 9.511925] fuse: init (API version 7.31) [ 9.512310] orangefs_debugfs_init: called with debug mask: :none: :0: [ 9.512499] orangefs_init: module version upstream loaded [ 9.512512] SGI XFS with ACLs, security attributes, realtime, scrub, no debug enabled [ 9.529654] async_tx: api initialized (async) [ 9.529679] Key type asymmetric registered [ 9.529689] Asymmetric key parser 'x509' registered [ 9.529762] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46) [ 9.531210] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 9.533164] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 00:00 [ 9.533187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 9.533203] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 9.533217] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 9.533232] pci_bus 0000:00: scanning bus [ 9.533345] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 9.533386] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref] [ 9.535033] pci_bus 0000:00: fixups for bus [ 9.535047] PCI: bus0: Fast back to back transfers disabled [ 9.535066] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 9.535075] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 9.535095] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 9.535235] pci_bus 0000:01: scanning bus [ 9.536544] pci_bus 0000:01: fixups for bus [ 9.536551] PCI: bus1: Fast back to back transfers enabled [ 9.536565] pci_bus 0000:01: bus scan returning with max=01 [ 9.536577] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 9.536594] pci_bus 0000:00: bus scan returning with max=01 [ 9.536779] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref ] [ 9.536798] pci 0000:00:01.0: PCI bridge to [bus 01] [ 9.536894] pcieport 0000:00:01.0: assign IRQ: got 0 [ 9.536918] pcieport 0000:00:01.0: enabling bus mastering [ 9.537439] mv_xor f1060800.xor: Marvell shared XOR driver [ 9.594215] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.596197] mv_xor f1060900.xor: Marvell shared XOR driver [ 9.654208] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 9.656475] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 9.657766] printk: console [ttyS0] disabled [ 9.657839] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 10.499377] printk: console [ttyS0] enabled [ 10.511844] loop: module loaded [ 10.516085] sata_mv f1080000.sata: version 1.28 [ 10.516345] sata_mv f1080000.sata: slots 32 ports 2 [ 10.524748] scsi host0: sata_mv [ 10.529206] scsi host1: sata_mv [ 10.533367] ata1: SATA max UDMA/133 irq 33 [ 10.538247] ata2: SATA max UDMA/133 irq 33 [ 10.544101] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 10.551285] nand: Samsung NAND 128MiB 3,3V 8-bit [ 10.556655] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 10.564989] Scanning device for bad blocks [ 10.589554] Bad eraseblock 205 at 0x0000019a0000 [ 10.596691] Bad eraseblock 224 at 0x000001c00000 [ 10.602748] Bad eraseblock 232 at 0x000001d00000 [ 10.622150] Bad eraseblock 379 at 0x000002f60000 [ 10.632161] Bad eraseblock 428 at 0x000003580000 [ 10.646873] Bad eraseblock 526 at 0x0000041c0000 [ 10.658121] Bad eraseblock 588 at 0x000004980000 [ 10.696836] Bad eraseblock 936 at 0x000007500000 [ 10.710539] 2 cmdlinepart partitions found on MTD device orion_nand [ 10.717554] Creating 2 MTD partitions on "orion_nand": [ 10.723436] 0x000000000000-0x000000100000 : "uboot" [ 10.730347] 0x000000100000-0x000000180000 : "uboot_env_stock" [ 10.739294] libphy: Fixed MDIO Bus: probed [ 10.744936] libphy: orion_mdio_bus: probed [ 10.763851] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 10.771902] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 10.779358] mv643xx_eth: Set the PHY to fix link down [ 10.780162] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:9b:2f:78 [ 10.795667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 10.802986] ehci-pci: EHCI PCI platform driver [ 10.808272] ehci-orion: EHCI orion driver [ 10.813190] orion-ehci f1050000.ehci: EHCI Host Controller [ 10.819505] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 10.828136] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 10.863425] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 10.870467] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.02 [ 10.879576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 10.887556] usb usb1: Product: EHCI Host Controller [ 10.893157] usb usb1: Manufacturer: Linux 5.2.9-kirkwood-tld-1 ehci_hcd [ 10.900519] usb usb1: SerialNumber: f1050000.ehci [ 10.906577] hub 1-0:1.0: USB hub found [ 10.911088] hub 1-0:1.0: 1 port detected [ 10.916497] usbcore: registered new interface driver usb-storage [ 10.923656] mousedev: PS/2 mouse device common for all mice [ 10.930508] rtc-mv f1010300.rtc: registered as rtc0 [ 10.936316] i2c /dev entries driver [ 10.943274] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliab le. [ 10.951620] rtc-pcf8563 0-0051: registered as rtc1 [ 10.958838] device-mapper: uevent: version 1.0.3 [ 10.964495] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-d evel@redhat.com [ 10.974111] device-mapper: multipath round-robin: version 1.2.0 loaded [ 10.981367] device-mapper: multipath queue-length: version 0.2.0 loaded [ 10.988776] device-mapper: multipath service-time: version 0.3.0 loaded [ 10.996227] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 11.003054] device-mapper: raid: Loading target version 1.14.0 [ 11.011666] hidraw: raw HID events driver (C) Jiri Kosina [ 11.018162] drop_monitor: Initializing network drop monitor service [ 11.025615] NET: Registered protocol family 17 [ 11.031024] Key type dns_resolver registered [ 11.036904] registered taskstats version 1 [ 11.041716] Loading compiled-in X.509 certificates [ 11.047297] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.054399] zswap: loaded using pool lzo/zbud [ 11.083811] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 11.091259] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01113, max UDMA7 [ 11.100774] ata1.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.152119] ata1.00: configured for UDMA/133 [ 11.174099] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1113 PQ : 0 ANSI: 5 [ 11.189098] Key type big_key registered [ 11.194760] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 11.213706] sd 0:0:0:0: [sda] Write Protect is off [ 11.219237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.219408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 11.264986] Key type encrypted registered [ 11.271731] rtc-mv f1010300.rtc: setting system clock to 2024-03-07T12:30:50 UTC (1709814650) [ 11.283650] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 11.291499] sda: sda1 [ 11.296274] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.495144] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcd Device=77.63 [ 11.504115] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 11.512021] usb 1-1: Product: USB2.0 Hub [ 11.517552] hub 1-1:1.0: USB hub found [ 11.522388] hub 1-1:1.0: 4 ports detected [ 11.703436] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 11.733667] ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7 [ 11.740415] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.773687] ata2.00: configured for UDMA/133 [ 11.789232] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1118 PQ : 0 ANSI: 5 [ 11.799081] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/93 2 GiB) [ 11.807927] sd 1:0:0:0: [sdb] Write Protect is off [ 11.813484] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.813611] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 11.843452] usb 1-1.1: new high-speed USB device number 3 using orion-ehci [ 11.867874] sdb: sdb1 [ 11.872511] sd 1:0:0:0: [sdb] Attached SCSI disk [ 11.881051] Freeing unused kernel memory: 1024K [ 11.894057] Checked W+X mappings: passed, no W+X pages found [ 11.900445] Run /init as init process [ 12.055667] usb 1-1.1: New USB device found, idVendor=174c, idProduct=5106, b cdDevice= 0.01 [ 12.073478] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber =1 [ 12.081528] usb 1-1.1: Product: AS2105 [ 12.103509] usb 1-1.1: Manufacturer: ASMedia [ 12.108508] usb 1-1.1: SerialNumber: SE837B1696 [ 12.131411] usb-storage 1-1.1:1.0: USB Mass Storage device detected [ 12.154108] scsi host2: usb-storage 1-1.1:1.0 [ 12.165484] usbcore: registered new interface driver uas [ 13.204508] scsi 2:0:0:0: Direct-Access SAMSUNG MMCRE64G8MPP-0VA VAM0 PQ : 0 ANSI: 5 [ 13.224334] sd 2:0:0:0: [sdc] 125045424 512-byte logical blocks: (64.0 GB/59. 6 GiB) [ 13.242365] sd 2:0:0:0: [sdc] Write Protect is off [ 13.251275] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 13.252081] sd 2:0:0:0: [sdc] No Caching mode page found [ 13.264145] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 13.286191] sdc: sdc1 sdc2 [ 13.296950] sd 2:0:0:0: [sdc] Attached SCSI disk [ 26.626183] random: crng init done [ 87.178340] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsyste m [ 87.221245] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 88.146839] systemd[1]: RTC configured in localtime, applying delta of 60 min utes to system time. [ 88.230992] systemd[1]: Inserted module 'autofs4' [ 88.283008] NET: Registered protocol family 10 [ 88.289478] Segment Routing with IPv6 [ 88.346576] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 88.369855] systemd[1]: Detected architecture arm. [ 88.432034] systemd[1]: Set hostname to <Vault-111>. [ 90.215140] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not sup port BPF/cgroup based firewalling. [ 90.233077] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warni ng is only shown for the first loaded unit using IP firewalling.) [ 90.591400] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= referenc es path below legacy directory /var/run/, updating /var/run/samba/smbd.pid → /ru n/samba/smbd.pid; please update the unit file accordingly. [ 90.642956] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= referenc es path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid → /ru n/samba/nmbd.pid; please update the unit file accordingly. [ 90.754048] systemd[1]: /lib/systemd/system/rpc-statd.service:13: PIDFile= re ferences path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly. [ 90.886535] systemd[1]: Listening on Journal Audit Socket. [ 90.926402] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 92.381500] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro [ 93.197205] systemd-journald[235]: Received request to flush runtime journal from PID 1 [ 94.035124] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 94.348470] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 94.888426] watchdog: f1020300.watchdog-timer: driver supplied timeout (42949 67295) out of range [ 95.021253] watchdog: f1020300.watchdog-timer: falling back to default timeou t (21) [ 95.157303] orion_wdt: Initial timeout 21 sec [ 95.212613] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 95.257490] marvell-cesa f1030000.crypto: CESA device successfully registered [ 95.295155] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 95.392394] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 97.473561] Adding 2097148k swap on /dev/sdc2. Priority:-2 extents:1 across: 2097148k FS [ 97.764451] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful l duplex, flow control disabled [ 97.775134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 100.893948] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste m [ 101.202368] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl [ 103.247420] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl [ 195.329202] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic =0 (nowayout=0) root@Vault-111:~#
Re: NSA 320 possible messedup Env March 07, 2024 02:24PM |
Admin Registered: 14 years ago Posts: 19,325 |
Re: NSA 320 possible messedup Env March 08, 2024 01:01PM |
Registered: 11 months ago Posts: 52 |
root@debian:~# iperf -c 192.168.178.140 ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 48790 connected with 192.168.178.140 port 5001 (icwnd/mss/irtt=14/1448/2462) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0057 sec 924 MBytes 775 Mbits/sec root@debian:~#
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.178.140 port 5001 connected with 192.168.178.136 port 48790 (icwnd/mss/irtt=14/1448/1787) [ ID] Interval Transfer Bandwidth [ 3] 0.0000-10.0033 sec 924 MBytes 775 Mbits/sec
root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 5001 connected with 192.168.178.140 port 38970 (icwnd/mss/irtt=14/1448/2100) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0151 sec 109 MBytes 91.1 Mbits/sec
root@debianVM:/home/administrator# iperf -c 192.168.178.136 ------------------------------------------------------------ Client connecting to 192.168.178.136, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 38970 connected with 192.168.178.136 port 5001 (icwnd/mss/irtt=14/1448/1973) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0208 sec 109 MBytes 91.0 Mbits/sec root@debianVM:/home/administrator#
root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.5.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Zyxel NSA320 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootd elay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock) init=/bin/s ystemd [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, l inear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, li near) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 491984K/524288K available (12288K kernel code, 1755K rwda ta, 5416K rodata, 1024K init, 301K bss, 32304K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.000049] Switching to timer-based delay loop, resolution 5ns [ 0.000654] Console: colour dummy device 80x30 [ 0.000727] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000759] CPU: Testing write buffer coherency: ok [ 0.000900] pid_max: default: 32768 minimum: 301 [ 0.009640] LSM: initializing lsm=capability,integrity [ 0.012118] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r) [ 0.012158] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.024743] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.025122] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adju st=1. [ 0.025612] Setting up static identity map for 0x100000 - 0x100058 [ 0.025974] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.026411] rcu: Hierarchical SRCU implementation. [ 0.026428] rcu: Max phase no-delay instances is 1000. [ 0.029465] devtmpfs: initialized [ 0.041243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.041289] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.044110] prandom: seed boundary self test passed [ 0.048357] prandom: 100 self tests passed [ 0.048373] pinctrl core: initialized pinctrl subsystem [ 0.052212] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.053219] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058637] audit: initializing netlink subsys (disabled) [ 0.059715] audit: type=2000 audit(0.050:1): state=initialized audit_enabled= 0 res=1 [ 0.061493] thermal_sys: Registered thermal governor 'step_wise' [ 0.061655] cpuidle: using governor ladder [ 0.061738] cpuidle: using governor menu [ 0.062420] Feroceon L2: Enabling L2 [ 0.062459] Feroceon L2: Cache support initialised. [ 0.074699] No ATAGs? [ 0.430065] raid6: int32x8 gen() 110 MB/s [ 0.770065] raid6: int32x4 gen() 106 MB/s [ 1.120068] raid6: int32x2 gen() 136 MB/s [ 1.460067] raid6: int32x1 gen() 98 MB/s [ 1.460081] raid6: using algorithm int32x2 gen() 136 MB/s [ 1.800067] raid6: .... xor() 86 MB/s, rmw enabled [ 1.800079] raid6: using intx1 recovery algorithm [ 1.801797] SCSI subsystem initialized [ 1.802153] libata version 3.00 loaded. [ 1.802559] usbcore: registered new interface driver usbfs [ 1.802632] usbcore: registered new interface driver hub [ 1.802770] usbcore: registered new device driver usb [ 1.803127] pps_core: LinuxPPS API ver. 1 registered [ 1.803137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 1.803171] PTP clock support registered [ 1.806118] vgaarb: loaded [ 1.806977] clocksource: Switched to clocksource orion_clocksource [ 1.816501] VFS: Disk quotas dquot_6.6.0 [ 1.816938] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.862788] NET: Registered PF_INET protocol family [ 1.863135] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear ) [ 1.865987] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.866230] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.866274] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.866357] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.866847] TCP: Hash tables configured (established 4096 bind 4096) [ 1.867599] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear ) [ 1.867846] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.867882] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.868796] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.869988] RPC: Registered named UNIX socket transport module. [ 1.870003] RPC: Registered udp transport module. [ 1.870010] RPC: Registered tcp transport module. [ 1.870016] RPC: Registered tcp-with-tls transport module. [ 1.870021] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.870043] PCI: CLS 0 bytes, default 32 [ 1.873086] Trying to unpack rootfs image as initramfs... [ 2.854329] Freeing initrd memory: 5656K [ 3.707918] Initialise system trusted keyrings [ 3.708012] Key type blacklist registered [ 3.709468] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 3.709654] zbud: loaded [ 3.728856] NFS: Registering the id_resolver key type [ 3.728910] Key type id_resolver registered [ 3.728920] Key type id_legacy registered [ 3.729116] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.729138] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 3.730764] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 3.731703] fuse: init (API version 7.38) [ 3.733178] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.733522] orangefs_init: module version upstream loaded [ 3.733916] SGI XFS with ACLs, security attributes, realtime, scrub, quota, n o debug enabled [ 3.902058] jitterentropy: Initialization failed with host not compliant with requirements: 9 [ 3.902098] xor: measuring software checksum speed [ 3.910935] arm4regs : 1119 MB/sec [ 3.925613] 8regs : 671 MB/sec [ 3.935967] 32regs : 952 MB/sec [ 3.935977] xor: using function: arm4regs (1119 MB/sec) [ 3.935992] async_tx: api initialized (async) [ 3.936009] Key type asymmetric registered [ 3.936017] Asymmetric key parser 'x509' registered [ 3.988656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46) [ 3.989110] io scheduler bfq registered [ 4.178225] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 4.180446] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.181973] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.183093] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f100000 0/pcie@82000000 ranges: [ 4.183136] mvebu-pcie mbus@f1000000:pcie@82000000: Parsing ranges property.. . [ 4.183178] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x 00f1041fff -> 0x0000040000 [ 4.183224] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 4.183254] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 4.183962] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 00:00 [ 4.183982] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.184002] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (b us address [0x00040000-0x00041fff]) [ 4.184019] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 4.184034] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 4.184049] pci_bus 0000:00: scanning bus [ 4.184153] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 4.184605] pci 0000:00:01.0: vgaarb: pci_notify [ 4.186105] pci_bus 0000:00: fixups for bus [ 4.186126] PCI: bus0: Fast back to back transfers disabled [ 4.186141] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 4.186157] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 4.186177] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 4.186378] pci_bus 0000:01: scanning bus [ 4.186443] pci_bus 0000:01: fixups for bus [ 4.186452] PCI: bus1: Fast back to back transfers enabled [ 4.186463] pci_bus 0000:01: bus scan returning with max=01 [ 4.186475] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.186496] pci_bus 0000:00: bus scan returning with max=01 [ 4.186518] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.186617] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.186655] pcieport 0000:00:01.0: assign IRQ: got 0 [ 4.186687] pcieport 0000:00:01.0: enabling bus mastering [ 4.186722] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.187758] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.249623] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.254478] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.319641] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.324778] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.327552] printk: console [ttyS0] disabled [ 4.328240] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 28, base_baud = 12500000) is a 16550A [ 4.328311] printk: console [ttyS0] enabled [ 5.336816] loop: module loaded [ 5.341122] sata_mv f1080000.sata: version 1.28 [ 5.341861] sata_mv f1080000.sata: slots 32 ports 2 [ 5.352494] scsi host0: sata_mv [ 5.358097] scsi host1: sata_mv [ 5.362445] ata1: SATA max UDMA/133 irq 29 [ 5.367350] ata2: SATA max UDMA/133 irq 29 [ 5.373569] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 5.380709] nand: Samsung NAND 128MiB 3,3V 8-bit [ 5.386057] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 5.394417] Scanning device for bad blocks [ 5.419115] Bad eraseblock 205 at 0x0000019a0000 [ 5.426246] Bad eraseblock 224 at 0x000001c00000 [ 5.432339] Bad eraseblock 232 at 0x000001d00000 [ 5.451831] Bad eraseblock 379 at 0x000002f60000 [ 5.461874] Bad eraseblock 428 at 0x000003580000 [ 5.476642] Bad eraseblock 526 at 0x0000041c0000 [ 5.487959] Bad eraseblock 588 at 0x000004980000 [ 5.526833] Bad eraseblock 936 at 0x000007500000 [ 5.540626] 2 cmdlinepart partitions found on MTD device orion_nand [ 5.547648] Creating 2 MTD partitions on "orion_nand": [ 5.553520] 0x000000000000-0x000000100000 : "uboot" [ 5.560021] 0x000000100000-0x000000180000 : "uboot_env_stock" [ 5.568149] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info rmation. [ 5.576729] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved. [ 5.614655] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.624513] mv643xx_eth: Set the PHY to fix link down [ 5.625476] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:9b:2f:78 [ 5.641605] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.647968] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 5.656620] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.687006] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.694216] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 6.05 [ 5.703285] ata1: SATA link down (SStatus 0 SControl F300) [ 5.709548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.717598] usb usb1: Product: EHCI Host Controller [ 5.723208] usb usb1: Manufacturer: Linux 6.5.7-kirkwood-tld-1 ehci_hcd [ 5.730715] usb usb1: SerialNumber: f1050000.ehci [ 5.737412] hub 1-0:1.0: USB hub found [ 5.741943] hub 1-0:1.0: 1 port detected [ 5.747688] usbcore: registered new interface driver usb-storage [ 5.755086] mousedev: PS/2 mouse device common for all mice [ 5.763093] rtc-mv f1010300.rtc: registered as rtc0 [ 5.768958] rtc-mv f1010300.rtc: setting system clock to 2024-03-08T15:55:30 UTC (1709913330) [ 5.778534] i2c_dev: i2c /dev entries driver [ 5.786950] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliab le. [ 5.795457] rtc-pcf8563 0-0051: registered as rtc1 [ 5.803384] device-mapper: uevent: version 1.0.3 [ 5.809362] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-d evel@redhat.com [ 5.819342] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.826613] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.834063] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.841527] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.851871] ledtrig-cpu: registered to indicate activity on CPUs [ 5.858830] hid: raw HID events driver (C) Jiri Kosina [ 5.865149] drop_monitor: Initializing network drop monitor service [ 5.873831] NET: Registered PF_INET6 protocol family [ 5.882009] Segment Routing with IPv6 [ 5.886403] RPL Segment Routing with IPv6 [ 5.891333] In-situ OAM (IOAM) with IPv6 [ 5.896143] NET: Registered PF_PACKET protocol family [ 5.902332] Key type dns_resolver registered [ 5.926863] registered taskstats version 1 [ 5.932020] Loading compiled-in X.509 certificates [ 5.960132] Key type .fscrypt registered [ 5.964858] Key type fscrypt-provisioning registered [ 5.977324] Key type big_key registered [ 6.027080] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.036641] Key type encrypted registered [ 6.061892] ata2: SATA link down (SStatus 0 SControl F300) [ 6.156491] "cryptomgr_test" (103) uses obsolete ecb(arc4) skcipher [ 6.238877] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcd Device=77.63 [ 6.257007] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.264887] usb 1-1: Product: USB2.0 Hub [ 6.288290] hub 1-1:1.0: USB hub found [ 6.297017] hub 1-1:1.0: 4 ports detected [ 6.627009] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 6.797998] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0817, b cdDevice= 0.01 [ 6.817000] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 6.825059] usb 1-1.2: Product: Intenso Alu Line [ 6.847017] usb 1-1.2: Manufacturer: is817 [ 6.851847] usb 1-1.2: SerialNumber: 201404301986 [ 6.868135] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.887659] scsi host2: usb-storage 1-1.2:1.0 [ 7.928431] scsi 2:0:0:0: Direct-Access Intenso Alu Line 1.00 PQ : 0 ANSI: 6 [ 7.949177] sd 2:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 7.967534] sd 2:0:0:0: [sda] Write Protect is off [ 7.973090] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 7.977038] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, do esn't support DPO or FUA [ 8.011515] sda: sda1 sda2 [ 8.027646] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 8.588347] clk: Disabling unused clocks [ 8.596848] Freeing unused kernel image (initmem) memory: 1024K [ 8.617841] Checked W+X mappings: passed, no W+X pages found [ 8.624255] Run /init as init process [ 8.628707] with arguments: [ 8.628721] /init [ 8.628732] with environment: [ 8.628740] HOME=/ [ 8.628749] TERM=linux [ 10.147368] usbcore: registered new interface driver uas [ 38.987034] random: crng init done [ 48.455277] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste m [ 48.514176] EXT4-fs (sda1): mounted filesystem c5bf84c2-5718-419d-9e09-4c162e ede70b ro with ordered data mode. Quota mode: none. [ 59.967955] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 60.003651] orion_wdt: Initial timeout 21 sec [ 60.422419] marvell-cesa f1030000.crypto: CESA device successfully registered [ 61.530530] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 66.041844] EXT4-fs (sda1): re-mounted c5bf84c2-5718-419d-9e09-4c162eede70b r /w. Quota mode: none. [ 68.828029] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 72.545671] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful l duplex, flow control disabled [ 77.387000] sched: RT throttling activated root@debian:~#
Re: NSA 320 possible messedup Env March 08, 2024 01:27PM |
Admin Registered: 14 years ago Posts: 19,325 |
ethtool -K eth0 tso on sg onAnd run the tests again.
Re: NSA 320 possible messedup Env March 08, 2024 02:17PM |
Registered: 11 months ago Posts: 52 |
root@debian:~# ethtool -K eth0 tso on sg on Actual changes: tx-scatter-gather-fraglist: off [requested on] tx-tcp-ecn-segmentation: off [requested on] tx-tcp6-segmentation: off [requested on] root@debian:~#
root@debian:~# iperf -c 192.168.178.140 ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 56560 connected with 192.168.178.140 port 5001 (icwnd/mss/irtt=14/1448/2321) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0058 sec 823 MBytes 690 Mbits/sec root@debian:~#
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 5001 connected with 192.168.178.136 port 56560 (icwnd/mss/irtt=14/1448/2120) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0040 sec 823 MBytes 690 Mbits/sec
root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 5001 connected with 192.168.178.140 port 51766 (icwnd/mss/irtt=14/1448/4202) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0758 sec 111 MBytes 92.1 Mbits/sec
root@debianVM:/home/administrator# iperf -c 192.168.178.136 ------------------------------------------------------------ Client connecting to 192.168.178.136, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 51766 connected with 192.168.178.136 port 5001 (icwnd/mss/irtt=14/1448/4474) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0864 sec 111 MBytes 92.0 Mbits/sec root@debianVM:/home/administrator#
root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.5.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397 f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Zyxel NSA320 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootd elay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock) init=/bin/s ystemd [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, l inear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, li near) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 491984K/524288K available (12288K kernel code, 1755K rwda ta, 5416K rodata, 1024K init, 301K bss, 32304K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xff ffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737 418237ns [ 0.000049] Switching to timer-based delay loop, resolution 5ns [ 0.000654] Console: colour dummy device 80x30 [ 0.000727] Calibrating delay loop (skipped), value calculated using timer fr equency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000759] CPU: Testing write buffer coherency: ok [ 0.000900] pid_max: default: 32768 minimum: 301 [ 0.009642] LSM: initializing lsm=capability,integrity [ 0.012115] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linea r) [ 0.012154] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.024734] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.025114] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adju st=1. [ 0.025609] Setting up static identity map for 0x100000 - 0x100058 [ 0.025970] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.026405] rcu: Hierarchical SRCU implementation. [ 0.026422] rcu: Max phase no-delay instances is 1000. [ 0.029465] devtmpfs: initialized [ 0.041188] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.041233] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.044054] prandom: seed boundary self test passed [ 0.048301] prandom: 100 self tests passed [ 0.048318] pinctrl core: initialized pinctrl subsystem [ 0.052183] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.053198] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058604] audit: initializing netlink subsys (disabled) [ 0.059687] audit: type=2000 audit(0.050:1): state=initialized audit_enabled= 0 res=1 [ 0.061452] thermal_sys: Registered thermal governor 'step_wise' [ 0.061610] cpuidle: using governor ladder [ 0.061692] cpuidle: using governor menu [ 0.062374] Feroceon L2: Enabling L2 [ 0.062413] Feroceon L2: Cache support initialised. [ 0.074637] No ATAGs? [ 0.430065] raid6: int32x8 gen() 110 MB/s [ 0.770066] raid6: int32x4 gen() 106 MB/s [ 1.120068] raid6: int32x2 gen() 140 MB/s [ 1.460066] raid6: int32x1 gen() 98 MB/s [ 1.460081] raid6: using algorithm int32x2 gen() 140 MB/s [ 1.800065] raid6: .... xor() 86 MB/s, rmw enabled [ 1.800077] raid6: using intx1 recovery algorithm [ 1.801791] SCSI subsystem initialized [ 1.802150] libata version 3.00 loaded. [ 1.802551] usbcore: registered new interface driver usbfs [ 1.802623] usbcore: registered new interface driver hub [ 1.802758] usbcore: registered new device driver usb [ 1.803113] pps_core: LinuxPPS API ver. 1 registered [ 1.803123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it> [ 1.803156] PTP clock support registered [ 1.806084] vgaarb: loaded [ 1.806943] clocksource: Switched to clocksource orion_clocksource [ 1.816489] VFS: Disk quotas dquot_6.6.0 [ 1.816923] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.852975] NET: Registered PF_INET protocol family [ 1.857114] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear ) [ 1.859957] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.860200] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.860243] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.860326] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.860817] TCP: Hash tables configured (established 4096 bind 4096) [ 1.861526] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear ) [ 1.861773] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.861809] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.862718] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.877626] RPC: Registered named UNIX socket transport module. [ 1.877641] RPC: Registered udp transport module. [ 1.877648] RPC: Registered tcp transport module. [ 1.877654] RPC: Registered tcp-with-tls transport module. [ 1.877660] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.877681] PCI: CLS 0 bytes, default 32 [ 1.880731] Trying to unpack rootfs image as initramfs... [ 2.852123] Freeing initrd memory: 5656K [ 3.707916] Initialise system trusted keyrings [ 3.708010] Key type blacklist registered [ 3.709462] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 3.709645] zbud: loaded [ 3.728827] NFS: Registering the id_resolver key type [ 3.728880] Key type id_resolver registered [ 3.728890] Key type id_legacy registered [ 3.729087] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.729110] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering ... [ 3.730736] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 3.731675] fuse: init (API version 7.38) [ 3.733150] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.733492] orangefs_init: module version upstream loaded [ 3.733886] SGI XFS with ACLs, security attributes, realtime, scrub, quota, n o debug enabled [ 3.901848] jitterentropy: Initialization failed with host not compliant with requirements: 9 [ 3.901887] xor: measuring software checksum speed [ 3.910778] arm4regs : 1119 MB/sec [ 3.925455] 8regs : 671 MB/sec [ 3.935809] 32regs : 952 MB/sec [ 3.935819] xor: using function: arm4regs (1119 MB/sec) [ 3.935835] async_tx: api initialized (async) [ 3.935851] Key type asymmetric registered [ 3.935860] Asymmetric key parser 'x509' registered [ 3.988415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 46) [ 3.988869] io scheduler bfq registered [ 4.178006] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driv er [ 4.180240] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.181766] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.182878] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f100000 0/pcie@82000000 ranges: [ 4.182920] mvebu-pcie mbus@f1000000:pcie@82000000: Parsing ranges property.. . [ 4.182963] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x 00f1041fff -> 0x0000040000 [ 4.183008] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 4.183038] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffff ff..0x00fffffffe -> 0x0100000000 [ 4.183747] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 00 00:00 [ 4.183767] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.183787] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (b us address [0x00040000-0x00041fff]) [ 4.183804] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 4.183819] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 4.183835] pci_bus 0000:00: scanning bus [ 4.183940] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 4.184395] pci 0000:00:01.0: vgaarb: pci_notify [ 4.185896] pci_bus 0000:00: fixups for bus [ 4.185917] PCI: bus0: Fast back to back transfers disabled [ 4.185932] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 4.185947] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), rec onfiguring [ 4.185967] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 4.186168] pci_bus 0000:01: scanning bus [ 4.186234] pci_bus 0000:01: fixups for bus [ 4.186243] PCI: bus1: Fast back to back transfers enabled [ 4.186254] pci_bus 0000:01: bus scan returning with max=01 [ 4.186267] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.186288] pci_bus 0000:00: bus scan returning with max=01 [ 4.186310] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.186409] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.186447] pcieport 0000:00:01.0: assign IRQ: got 0 [ 4.186480] pcieport 0000:00:01.0: enabling bus mastering [ 4.186515] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.187558] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.249594] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.254454] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.319607] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.324748] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.327532] printk: console [ttyS0] disabled [ 4.328219] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 28, base_baud = 12500000) is a 16550A [ 4.328289] printk: console [ttyS0] enabled [ 5.336831] loop: module loaded [ 5.341138] sata_mv f1080000.sata: version 1.28 [ 5.341877] sata_mv f1080000.sata: slots 32 ports 2 [ 5.352501] scsi host0: sata_mv [ 5.358093] scsi host1: sata_mv [ 5.362443] ata1: SATA max UDMA/133 irq 29 [ 5.367348] ata2: SATA max UDMA/133 irq 29 [ 5.373560] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 5.380708] nand: Samsung NAND 128MiB 3,3V 8-bit [ 5.386054] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB siz e: 64 [ 5.394414] Scanning device for bad blocks [ 5.419086] Bad eraseblock 205 at 0x0000019a0000 [ 5.426216] Bad eraseblock 224 at 0x000001c00000 [ 5.432299] Bad eraseblock 232 at 0x000001d00000 [ 5.451790] Bad eraseblock 379 at 0x000002f60000 [ 5.461835] Bad eraseblock 428 at 0x000003580000 [ 5.476594] Bad eraseblock 526 at 0x0000041c0000 [ 5.487890] Bad eraseblock 588 at 0x000004980000 [ 5.526787] Bad eraseblock 936 at 0x000007500000 [ 5.540557] 2 cmdlinepart partitions found on MTD device orion_nand [ 5.547577] Creating 2 MTD partitions on "orion_nand": [ 5.553447] 0x000000000000-0x000000100000 : "uboot" [ 5.559949] 0x000000100000-0x000000180000 : "uboot_env_stock" [ 5.568072] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for info rmation. [ 5.576647] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c 4.com>. All Rights Reserved. [ 5.614744] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.624603] mv643xx_eth: Set the PHY to fix link down [ 5.625566] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:9b:2f:78 [ 5.641696] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.648066] orion-ehci f1050000.ehci: new USB bus registered, assigned bus nu mber 1 [ 5.656724] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.686971] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.694190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 6.05 [ 5.703266] ata1: SATA link down (SStatus 0 SControl F300) [ 5.709527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 5.717578] usb usb1: Product: EHCI Host Controller [ 5.723189] usb usb1: Manufacturer: Linux 6.5.7-kirkwood-tld-1 ehci_hcd [ 5.730693] usb usb1: SerialNumber: f1050000.ehci [ 5.737391] hub 1-0:1.0: USB hub found [ 5.741923] hub 1-0:1.0: 1 port detected [ 5.747664] usbcore: registered new interface driver usb-storage [ 5.755068] mousedev: PS/2 mouse device common for all mice [ 5.763070] rtc-mv f1010300.rtc: registered as rtc0 [ 5.768937] rtc-mv f1010300.rtc: setting system clock to 2024-03-08T20:08:37 UTC (1709928517) [ 5.778511] i2c_dev: i2c /dev entries driver [ 5.786925] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliab le. [ 5.795432] rtc-pcf8563 0-0051: registered as rtc1 [ 5.803352] device-mapper: uevent: version 1.0.3 [ 5.809341] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-d evel@redhat.com [ 5.819315] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.826593] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.834041] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.841507] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.851859] ledtrig-cpu: registered to indicate activity on CPUs [ 5.858815] hid: raw HID events driver (C) Jiri Kosina [ 5.865129] drop_monitor: Initializing network drop monitor service [ 5.873812] NET: Registered PF_INET6 protocol family [ 5.881973] Segment Routing with IPv6 [ 5.886373] RPL Segment Routing with IPv6 [ 5.891295] In-situ OAM (IOAM) with IPv6 [ 5.896107] NET: Registered PF_PACKET protocol family [ 5.902269] Key type dns_resolver registered [ 5.926792] registered taskstats version 1 [ 5.931953] Loading compiled-in X.509 certificates [ 5.960038] Key type .fscrypt registered [ 5.964769] Key type fscrypt-provisioning registered [ 5.977281] Key type big_key registered [ 6.027048] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.036639] Key type encrypted registered [ 6.061853] ata2: SATA link down (SStatus 0 SControl F300) [ 6.156499] "cryptomgr_test" (103) uses obsolete ecb(arc4) skcipher [ 6.238856] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcd Device=77.63 [ 6.256973] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.264858] usb 1-1: Product: USB2.0 Hub [ 6.288264] hub 1-1:1.0: USB hub found [ 6.296983] hub 1-1:1.0: 4 ports detected [ 6.626975] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 6.797976] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0817, b cdDevice= 0.01 [ 6.816966] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 6.825022] usb 1-1.2: Product: Intenso Alu Line [ 6.846983] usb 1-1.2: Manufacturer: is817 [ 6.851810] usb 1-1.2: SerialNumber: 201404301986 [ 6.868116] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.887616] scsi host2: usb-storage 1-1.2:1.0 [ 7.928410] scsi 2:0:0:0: Direct-Access Intenso Alu Line 1.00 PQ : 0 ANSI: 6 [ 7.949154] sd 2:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 7.967513] sd 2:0:0:0: [sda] Write Protect is off [ 7.973069] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 7.977006] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, do esn't support DPO or FUA [ 8.011494] sda: sda1 sda2 [ 8.027615] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 8.588652] clk: Disabling unused clocks [ 8.597239] Freeing unused kernel image (initmem) memory: 1024K [ 8.617806] Checked W+X mappings: passed, no W+X pages found [ 8.624215] Run /init as init process [ 8.628662] with arguments: [ 8.628676] /init [ 8.628687] with environment: [ 8.628695] HOME=/ [ 8.628704] TERM=linux [ 10.160544] usbcore: registered new interface driver uas [ 21.714917] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste m [ 21.755725] EXT4-fs (sda1): mounted filesystem c5bf84c2-5718-419d-9e09-4c162e ede70b ro with ordered data mode. Quota mode: none. [ 25.786336] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 26.267677] orion_wdt: Initial timeout 21 sec [ 26.971053] marvell-cesa f1030000.crypto: CESA device successfully registered [ 27.002848] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 28.846612] random: crng init done [ 28.901102] EXT4-fs (sda1): re-mounted c5bf84c2-5718-419d-9e09-4c162eede70b r /w. Quota mode: none. [ 31.783724] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 35.597892] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, ful l duplex, flow control disabled [ 43.416968] sched: RT throttling activated root@debian:~#
Re: NSA 320 possible messedup Env March 08, 2024 02:25PM |
Admin Registered: 14 years ago Posts: 19,325 |
ethtool -K eth0 tso on sg on ethtool -k eth0 | grep tcp-segment
ethtool -K eth0 tso on ethtool -k eth0 | grep tcp-segment
Re: NSA 320 possible messedup Env March 08, 2024 02:49PM |
Registered: 11 months ago Posts: 52 |
root@debian:~# ethtool -k eth0 | grep tcp-segment tcp-segmentation-offload: on tx-tcp-segmentation: on root@debian:~#
root@debian:~# ethtool -K eth0 tso on sg on Actual changes: tx-scatter-gather-fraglist: off [requested on] tx-tcp-ecn-segmentation: off [requested on] tx-tcp-mangleid-segmentation: on tx-tcp6-segmentation: off [requested on]
root@debian:~# ethtool -k eth0 | grep tcp-segment tcp-segmentation-offload: on tx-tcp-segmentation: on root@debian:~#
root@debian:~# ethtool -K eth0 tso on Actual changes: tx-tcp-ecn-segmentation: off [requested on] tx-tcp6-segmentation: off [requested on]
root@debian:~# ethtool -k eth0 | grep tcp-segment tcp-segmentation-offload: on tx-tcp-segmentation: on root@debian:~#
root@debian:~# iperf -c 192.168.178.140 ------------------------------------------------------------ Client connecting to 192.168.178.140, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 60142 connected with 192.168.178.140 port 5001 (icwnd/mss/irtt=14/1448/4444) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0057 sec 986 MBytes 826 Mbits/sec root@debian:~#ServerVM iperf -s
root@debianVM:/home/administrator# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 5001 connected with 192.168.178.136 port 60142 (icwnd/mss/irtt=14/1448/2134) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0043 sec 986 MBytes 826 Mbits/sec
root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 5001 connected with 192.168.178.140 port 42070 (icwnd/mss/irtt=14/1448/2074) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0142 sec 106 MBytes 88.8 Mbits/sec
root@debianVM:/home/administrator# iperf -c 192.168.178.136 ------------------------------------------------------------ Client connecting to 192.168.178.136, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 42070 connected with 192.168.178.136 port 5001 (icwnd/mss/irtt=14/1448/1451) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0233 sec 106 MBytes 88.7 Mbits/sec root@debianVM:/home/administrator#
root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.5.7-kirkwood-tld-1 (root@tldDebian) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: Zyxel NSA320 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=orion_nand:0x100000(uboot),0x80000(uboot_env_stock) init=/bin/systemd [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 491984K/524288K available (12288K kernel code, 1755K rwdata, 5416K rodata, 1024K init, 301K bss, 32304K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000002] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000049] Switching to timer-based delay loop, resolution 5ns [ 0.000654] Console: colour dummy device 80x30 [ 0.000727] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=2000000) [ 0.000759] CPU: Testing write buffer coherency: ok [ 0.000900] pid_max: default: 32768 minimum: 301 [ 0.009640] LSM: initializing lsm=capability,integrity [ 0.012118] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.012158] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.024743] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.025122] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.025612] Setting up static identity map for 0x100000 - 0x100058 [ 0.025974] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.026411] rcu: Hierarchical SRCU implementation. [ 0.026428] rcu: Max phase no-delay instances is 1000. [ 0.029465] devtmpfs: initialized [ 0.041243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.041289] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.044110] prandom: seed boundary self test passed [ 0.048357] prandom: 100 self tests passed [ 0.048373] pinctrl core: initialized pinctrl subsystem [ 0.052212] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.053219] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.058637] audit: initializing netlink subsys (disabled) [ 0.059715] audit: type=2000 audit(0.050:1): state=initialized audit_enabled=0 res=1 [ 0.061493] thermal_sys: Registered thermal governor 'step_wise' [ 0.061655] cpuidle: using governor ladder [ 0.061738] cpuidle: using governor menu [ 0.062420] Feroceon L2: Enabling L2 [ 0.062459] Feroceon L2: Cache support initialised. [ 0.074699] No ATAGs? [ 0.430065] raid6: int32x8 gen() 110 MB/s [ 0.770065] raid6: int32x4 gen() 106 MB/s [ 1.120068] raid6: int32x2 gen() 136 MB/s [ 1.460067] raid6: int32x1 gen() 98 MB/s [ 1.460081] raid6: using algorithm int32x2 gen() 136 MB/s [ 1.800067] raid6: .... xor() 86 MB/s, rmw enabled [ 1.800079] raid6: using intx1 recovery algorithm [ 1.801797] SCSI subsystem initialized [ 1.802153] libata version 3.00 loaded. [ 1.802559] usbcore: registered new interface driver usbfs [ 1.802632] usbcore: registered new interface driver hub [ 1.802770] usbcore: registered new device driver usb [ 1.803127] pps_core: LinuxPPS API ver. 1 registered [ 1.803137] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.803171] PTP clock support registered [ 1.806118] vgaarb: loaded [ 1.806977] clocksource: Switched to clocksource orion_clocksource [ 1.816501] VFS: Disk quotas dquot_6.6.0 [ 1.816938] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.862788] NET: Registered PF_INET protocol family [ 1.863135] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.865987] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.866230] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.866274] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.866357] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.866847] TCP: Hash tables configured (established 4096 bind 4096) [ 1.867599] MPTCP token hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.867846] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.867882] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.868796] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.869988] RPC: Registered named UNIX socket transport module. [ 1.870003] RPC: Registered udp transport module. [ 1.870010] RPC: Registered tcp transport module. [ 1.870016] RPC: Registered tcp-with-tls transport module. [ 1.870021] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.870043] PCI: CLS 0 bytes, default 32 [ 1.873086] Trying to unpack rootfs image as initramfs... [ 2.854329] Freeing initrd memory: 5656K [ 3.707918] Initialise system trusted keyrings [ 3.708012] Key type blacklist registered [ 3.709468] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 3.709654] zbud: loaded [ 3.728856] NFS: Registering the id_resolver key type [ 3.728910] Key type id_resolver registered [ 3.728920] Key type id_legacy registered [ 3.729116] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.729138] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 3.730764] jffs2: version 2.2. (NAND) (SUMMARY) \xc2\xa9 2001-2006 Red Hat, Inc. [ 3.731703] fuse: init (API version 7.38) [ 3.733178] orangefs_debugfs_init: called with debug mask: :none: :0: [ 3.733522] orangefs_init: module version upstream loaded [ 3.733916] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled [ 3.902058] jitterentropy: Initialization failed with host not compliant with requirements: 9 [ 3.902098] xor: measuring software checksum speed [ 3.910935] arm4regs : 1119 MB/sec [ 3.925613] 8regs : 671 MB/sec [ 3.935967] 32regs : 952 MB/sec [ 3.935977] xor: using function: arm4regs (1119 MB/sec) [ 3.935992] async_tx: api initialized (async) [ 3.936009] Key type asymmetric registered [ 3.936017] Asymmetric key parser 'x509' registered [ 3.988656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 3.989110] io scheduler bfq registered [ 4.178225] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 4.180446] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.181973] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 4.183093] mvebu-pcie mbus@f1000000:pcie@82000000: host bridge /mbus@f1000000/pcie@82000000 ranges: [ 4.183136] mvebu-pcie mbus@f1000000:pcie@82000000: Parsing ranges property... [ 4.183178] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0x00f1040000..0x00f1041fff -> 0x0000040000 [ 4.183224] mvebu-pcie mbus@f1000000:pcie@82000000: MEM 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 4.183254] mvebu-pcie mbus@f1000000:pcie@82000000: IO 0xffffffffffffffff..0x00fffffffe -> 0x0100000000 [ 4.183962] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 4.183982] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.184002] pci_bus 0000:00: root bus resource [mem 0xf1040000-0xf1041fff] (bus address [0x00040000-0x00041fff]) [ 4.184019] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 4.184034] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 4.184049] pci_bus 0000:00: scanning bus [ 4.184153] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 4.184605] pci 0000:00:01.0: vgaarb: pci_notify [ 4.186105] pci_bus 0000:00: fixups for bus [ 4.186126] PCI: bus0: Fast back to back transfers disabled [ 4.186141] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 0 [ 4.186157] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.186177] pci 0000:00:01.0: scanning [bus 00-00] behind bridge, pass 1 [ 4.186378] pci_bus 0000:01: scanning bus [ 4.186443] pci_bus 0000:01: fixups for bus [ 4.186452] PCI: bus1: Fast back to back transfers enabled [ 4.186463] pci_bus 0000:01: bus scan returning with max=01 [ 4.186475] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 4.186496] pci_bus 0000:00: bus scan returning with max=01 [ 4.186518] pci 0000:00:01.0: PCI bridge to [bus 01] [ 4.186617] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.186655] pcieport 0000:00:01.0: assign IRQ: got 0 [ 4.186687] pcieport 0000:00:01.0: enabling bus mastering [ 4.186722] pcieport 0000:00:01.0: vgaarb: pci_notify [ 4.187758] mv_xor f1060800.xor: Marvell shared XOR driver [ 4.249623] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.254478] mv_xor f1060900.xor: Marvell shared XOR driver [ 4.319641] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 4.324778] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.327552] printk: console [ttyS0] disabled [ 4.328240] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 28, base_baud = 12500000) is a 16550A [ 4.328311] printk: console [ttyS0] enabled [ 5.336870] loop: module loaded [ 5.341182] sata_mv f1080000.sata: version 1.28 [ 5.341921] sata_mv f1080000.sata: slots 32 ports 2 [ 5.352556] scsi host0: sata_mv [ 5.358160] scsi host1: sata_mv [ 5.362516] ata1: SATA max UDMA/133 irq 29 [ 5.367418] ata2: SATA max UDMA/133 irq 29 [ 5.373638] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1 [ 5.380786] nand: Samsung NAND 128MiB 3,3V 8-bit [ 5.386133] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 5.394493] Scanning device for bad blocks [ 5.419170] Bad eraseblock 205 at 0x0000019a0000 [ 5.426304] Bad eraseblock 224 at 0x000001c00000 [ 5.432387] Bad eraseblock 232 at 0x000001d00000 [ 5.451877] Bad eraseblock 379 at 0x000002f60000 [ 5.461924] Bad eraseblock 428 at 0x000003580000 [ 5.476692] Bad eraseblock 526 at 0x0000041c0000 [ 5.488010] Bad eraseblock 588 at 0x000004980000 [ 5.526881] Bad eraseblock 936 at 0x000007500000 [ 5.540670] 2 cmdlinepart partitions found on MTD device orion_nand [ 5.547691] Creating 2 MTD partitions on "orion_nand": [ 5.553562] 0x000000000000-0x000000100000 : "uboot" [ 5.560064] 0x000000100000-0x000000180000 : "uboot_env_stock" [ 5.568196] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 5.576779] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 5.614818] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 5.624673] mv643xx_eth: Set the PHY to fix link down [ 5.625629] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address c8:6c:87:9b:2f:78 [ 5.641762] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.648126] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 5.656786] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.687004] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.694221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 [ 5.703292] ata1: SATA link down (SStatus 0 SControl F300) [ 5.709553] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.717606] usb usb1: Product: EHCI Host Controller [ 5.723215] usb usb1: Manufacturer: Linux 6.5.7-kirkwood-tld-1 ehci_hcd [ 5.730722] usb usb1: SerialNumber: f1050000.ehci [ 5.737418] hub 1-0:1.0: USB hub found [ 5.741950] hub 1-0:1.0: 1 port detected [ 5.747692] usbcore: registered new interface driver usb-storage [ 5.755091] mousedev: PS/2 mouse device common for all mice [ 5.763100] rtc-mv f1010300.rtc: registered as rtc0 [ 5.768961] rtc-mv f1010300.rtc: setting system clock to 2024-03-08T20:34:35 UTC (1709930075) [ 5.778541] i2c_dev: i2c /dev entries driver [ 5.786963] rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable. [ 5.795467] rtc-pcf8563 0-0051: registered as rtc1 [ 5.803407] device-mapper: uevent: version 1.0.3 [ 5.809394] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.819378] device-mapper: multipath round-robin: version 1.2.0 loaded [ 5.826654] device-mapper: multipath queue-length: version 0.2.0 loaded [ 5.834103] device-mapper: multipath service-time: version 0.3.0 loaded [ 5.841570] device-mapper: dm-log-userspace: version 1.3.0 loaded [ 5.851917] ledtrig-cpu: registered to indicate activity on CPUs [ 5.858873] hid: raw HID events driver (C) Jiri Kosina [ 5.865188] drop_monitor: Initializing network drop monitor service [ 5.873867] NET: Registered PF_INET6 protocol family [ 5.882057] Segment Routing with IPv6 [ 5.886453] RPL Segment Routing with IPv6 [ 5.891385] In-situ OAM (IOAM) with IPv6 [ 5.896194] NET: Registered PF_PACKET protocol family [ 5.902401] Key type dns_resolver registered [ 5.926941] registered taskstats version 1 [ 5.932100] Loading compiled-in X.509 certificates [ 5.960216] Key type .fscrypt registered [ 5.964942] Key type fscrypt-provisioning registered [ 5.977395] Key type big_key registered [ 6.027082] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.036406] Key type encrypted registered [ 6.061628] ata2: SATA link down (SStatus 0 SControl F300) [ 6.156426] "cryptomgr_test" (103) uses obsolete ecb(arc4) skcipher [ 6.238918] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 6.257007] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.264893] usb 1-1: Product: USB2.0 Hub [ 6.288329] hub 1-1:1.0: USB hub found [ 6.297016] hub 1-1:1.0: 4 ports detected [ 6.627010] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 6.798039] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0817, bcdDevice= 0.01 [ 6.817000] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.825058] usb 1-1.2: Product: Intenso Alu Line [ 6.847017] usb 1-1.2: Manufacturer: is817 [ 6.851846] usb 1-1.2: SerialNumber: 201404301986 [ 6.868053] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.887656] scsi host2: usb-storage 1-1.2:1.0 [ 7.928469] scsi 2:0:0:0: Direct-Access Intenso Alu Line 1.00 PQ: 0 ANSI: 6 [ 7.949089] sd 2:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 7.967452] sd 2:0:0:0: [sda] Write Protect is off [ 7.973008] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 7.977037] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 8.003055] sda: sda1 sda2 [ 8.017649] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 8.588302] clk: Disabling unused clocks [ 8.596801] Freeing unused kernel image (initmem) memory: 1024K [ 8.617841] Checked W+X mappings: passed, no W+X pages found [ 8.624251] Run /init as init process [ 8.628696] with arguments: [ 8.628711] /init [ 8.628721] with environment: [ 8.628729] HOME=/ [ 8.628738] TERM=linux [ 10.156494] usbcore: registered new interface driver uas [ 21.109729] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.157719] EXT4-fs (sda1): mounted filesystem c5bf84c2-5718-419d-9e09-4c162eede70b ro with ordered data mode. Quota mode: none. [ 25.191942] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 25.608415] orion_wdt: Initial timeout 21 sec [ 26.337203] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 26.431137] marvell-cesa f1030000.crypto: CESA device successfully registered [ 28.059048] random: crng init done [ 28.326523] EXT4-fs (sda1): re-mounted c5bf84c2-5718-419d-9e09-4c162eede70b r/w. Quota mode: none. [ 31.186654] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 35.009875] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled root@debian:~#
Re: NSA 320 possible messedup Env March 08, 2024 03:14PM |
Admin Registered: 14 years ago Posts: 19,325 |
dmesg | tail -50On the Debian VM
dmesg | tail -50
Re: NSA 320 possible messedup Env March 08, 2024 03:22PM |
Registered: 11 months ago Posts: 52 |
root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 5001 connected with 192.168.178.140 port 44698 (icwnd/mss/irtt=14/1448/4005) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.1691 sec 108 MBytes 88.8 Mbits/sec
root@debianVM:/home/administrator# iperf -c 192.168.178.136 ------------------------------------------------------------ Client connecting to 192.168.178.136, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 44698 connected with 192.168.178.136 port 5001 (icwnd/mss/irtt=14/1448/3776) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.1871 sec 108 MBytes 88.6 Mbits/sec root@debianVM:/home/administrator#
root@debian:~# dmesg | tail -50 [ 6.437616] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 6.498916] sda: sda1 [ 6.507309] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.647000] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 6.817931] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0817, bcdDevice= 0.01 [ 6.836990] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.845048] usb 1-1.2: Product: Intenso Alu Line [ 6.866992] usb 1-1.2: Manufacturer: is817 [ 6.871817] usb 1-1.2: SerialNumber: 201404301986 [ 6.888112] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.907648] scsi host2: usb-storage 1-1.2:1.0 [ 7.928361] scsi 2:0:0:0: Direct-Access Intenso Alu Line 1.00 PQ: 0 ANSI: 6 [ 7.948974] sd 2:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 7.967468] sd 2:0:0:0: [sdb] Write Protect is off [ 7.973022] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 7.977027] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 8.003078] sdb: sdb1 sdb2 [ 8.017691] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 8.676144] clk: Disabling unused clocks [ 8.684736] Freeing unused kernel image (initmem) memory: 1024K [ 8.697836] Checked W+X mappings: passed, no W+X pages found [ 8.704252] Run /init as init process [ 8.708699] with arguments: [ 8.708714] /init [ 8.708723] with environment: [ 8.708732] HOME=/ [ 8.708741] TERM=linux [ 10.277316] usbcore: registered new interface driver uas [ 21.917371] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 21.978037] EXT4-fs (sdb1): mounted filesystem c5bf84c2-5718-419d-9e09-4c162eede70b ro with ordered data mode. Quota mode: none. [ 26.052570] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 26.485803] orion_wdt: Initial timeout 21 sec [ 26.858488] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 27.008442] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 27.211255] marvell-cesa f1030000.crypto: CESA device successfully registered [ 27.334585] random: crng init done [ 29.341152] EXT4-fs (sdb1): re-mounted c5bf84c2-5718-419d-9e09-4c162eede70b r/w. Quota mode: none. [ 32.228118] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 35.872214] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 40.256996] sched: RT throttling activated [ 384.197834] ata2: SATA link down (SStatus 0 SControl F300) [ 389.537843] ata2: SATA link down (SStatus 0 SControl F300) [ 389.544097] ata2: limiting SATA link speed to <unknown> [ 394.897850] ata2: SATA link down (SStatus 0 SControl F3F0) [ 394.904108] ata2.00: disable device [ 394.908752] ata2.00: detaching (SCSI 1:0:0:0) [ 394.956338] sd 1:0:0:0: [sda] Synchronizing SCSI cache [ 394.962320] sd 1:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 394.987393] sd 1:0:0:0: [sda] Stopping disk [ 394.992396] sd 1:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK root@debian:~#
root@debianVM:/home/administrator# dmesg | tail -50 [ 2.272569] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 2.273898] systemd[1]: Finished systemd-remount-fs.service - Remount Root an d Kernel File Systems. [ 2.274128] systemd[1]: systemd-firstboot.service - First Boot Wizard was ski pped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.274163] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotE mpty=/sys/fs/pstore). [ 2.274968] systemd[1]: Starting systemd-random-seed.service - Load/Save Rand om Seed... [ 2.275868] systemd[1]: Starting systemd-sysusers.service - Create System Use rs... [ 2.313568] lp: driver loaded but no devices found [ 2.314972] systemd[1]: Finished systemd-random-seed.service - Load/Save Rand om Seed. [ 2.315224] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.322596] systemd[1]: Mounted run-vmblock\x2dfuse.mount - VMware vmblock fu se mount. [ 2.325039] ppdev: user-space parallel port driver [ 2.370457] systemd[1]: Finished systemd-sysusers.service - Create System Use rs. [ 2.379276] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 2.388049] systemd[1]: Finished systemd-modules-load.service - Load Kernel M odules. [ 2.389203] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variab les... [ 2.481835] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variab les. [ 2.545946] systemd[1]: Finished keyboard-setup.service - Set the console key board layout. [ 2.569260] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.593025] systemd-journald[253]: Received client request to flush runtime j ournal. [ 2.714752] audit: type=1400 audit(1709591954.608:2): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="lsb_release" pid=301 comm="apparm or_parser" [ 2.720243] audit: type=1400 audit(1709591954.616:3): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe" pid=306 comm="ap parmor_parser" [ 2.720247] audit: type=1400 audit(1709591954.616:4): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=306 co mm="apparmor_parser" [ 2.737630] audit: type=1400 audit(1709591954.632:5): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-c lient.action" pid=307 comm="apparmor_parser" [ 2.737636] audit: type=1400 audit(1709591954.632:6): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-h elper" pid=307 comm="apparmor_parser" [ 2.737638] audit: type=1400 audit(1709591954.632:7): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient -script" pid=307 comm="apparmor_parser" [ 2.737640] audit: type=1400 audit(1709591954.632:8): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=307 co mm="apparmor_parser" [ 2.829046] audit: type=1400 audit(1709591954.724:9): apparmor="STATUS" opera tion="profile_load" profile="unconfined" name="/usr/bin/evince" pid=308 comm="ap parmor_parser" [ 2.829052] audit: type=1400 audit(1709591954.724:10): apparmor="STATUS" oper ation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helpe r" pid=308 comm="apparmor_parser" [ 3.009028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.009052] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.136618] ACPI: AC: AC Adapter [ACAD] (on-line) [ 3.382687] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:9 98396k FS [ 3.437006] vmw_vmci 0000:00:07.7: Using capabilities 0xc [ 3.471882] Guest personality initialized and is active [ 3.471912] VMCI host device registered (name=vmci, major=10, minor=124) [ 3.471913] Initialized host personality [ 3.482005] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.582639] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 3.608305] cryptd: max_cpu_qlen set to 1000 [ 3.634844] AVX version of gcm_enc/dec engaged. [ 3.634863] AES CTR mode by8 optimization enabled [ 3.975100] NET: Registered PF_VSOCK protocol family [ 4.449502] NET: Registered PF_QIPCRTR protocol family [ 4.630749] vmxnet3 0000:0b:00.0 ens192: intr type 3, mode 0, 2 vectors alloc ated [ 4.631292] vmxnet3 0000:0b:00.0 ens192: NIC Link is Up 10000 Mbps [ 7.824914] rfkill: input handler disabled [ 34.198595] rfkill: input handler enabled [ 37.328434] rfkill: input handler disabled [ 228.143423] [drm] vmwgfx: mob memory overflow. Consider increasing guest RAM and graphicsMemory. [ 228.143603] [drm] vmwgfx: increasing guest mob limits to 24576 kB. root@debianVM:/home/administrator#
Re: NSA 320 possible messedup Env March 08, 2024 03:35PM |
Registered: 11 months ago Posts: 52 |
root@debian:~# iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 128 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.136 port 5001 connected with 192.168.178.140 port 48564 (icwnd/mss/irtt=14/1448/4483) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0201 sec 94.5 MBytes 79.1 Mbits/sec
root@debianVM:/home/administrator# iperf -c 192.168.178.136 ------------------------------------------------------------ Client connecting to 192.168.178.136, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 1] local 192.168.178.140 port 48564 connected with 192.168.178.136 port 5001 (icwnd/mss/irtt=14/1448/3820) [ ID] Interval Transfer Bandwidth [ 1] 0.0000-10.0370 sec 94.5 MBytes 79.0 Mbits/sec root@debianVM:/home/administrator#
root@debian:~# dmesg | tail -50 [ 5.902358] Key type dns_resolver registered [ 5.926901] registered taskstats version 1 [ 5.932067] Loading compiled-in X.509 certificates [ 5.960198] Key type .fscrypt registered [ 5.964928] Key type fscrypt-provisioning registered [ 5.977393] Key type big_key registered [ 6.027083] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 6.036570] Key type encrypted registered [ 6.061779] ata2: SATA link down (SStatus 0 SControl F300) [ 6.156355] "cryptomgr_test" (103) uses obsolete ecb(arc4) skcipher [ 6.238854] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 6.257008] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.264888] usb 1-1: Product: USB2.0 Hub [ 6.288265] hub 1-1:1.0: USB hub found [ 6.297017] hub 1-1:1.0: 4 ports detected [ 6.627009] usb 1-1.2: new high-speed USB device number 3 using orion-ehci [ 6.797975] usb 1-1.2: New USB device found, idVendor=1f75, idProduct=0817, bcdDevice= 0.01 [ 6.817000] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.825051] usb 1-1.2: Product: Intenso Alu Line [ 6.847018] usb 1-1.2: Manufacturer: is817 [ 6.851848] usb 1-1.2: SerialNumber: 201404301986 [ 6.868109] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.887657] scsi host2: usb-storage 1-1.2:1.0 [ 7.928406] scsi 2:0:0:0: Direct-Access Intenso Alu Line 1.00 PQ: 0 ANSI: 6 [ 7.949147] sd 2:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) [ 7.967511] sd 2:0:0:0: [sda] Write Protect is off [ 7.973064] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 7.977038] sd 2:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 8.003115] sda: sda1 sda2 [ 8.017657] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 8.588264] clk: Disabling unused clocks [ 8.596758] Freeing unused kernel image (initmem) memory: 1024K [ 8.617844] Checked W+X mappings: passed, no W+X pages found [ 8.624254] Run /init as init process [ 8.628698] with arguments: [ 8.628712] /init [ 8.628722] with environment: [ 8.628731] HOME=/ [ 8.628740] TERM=linux [ 10.147350] usbcore: registered new interface driver uas [ 21.321004] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 21.388591] EXT4-fs (sda1): mounted filesystem c5bf84c2-5718-419d-9e09-4c162eede70b ro with ordered data mode. Quota mode: none. [ 28.014389] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 28.341267] orion_wdt: Initial timeout 21 sec [ 29.029614] marvell-cesa f1030000.crypto: CESA device successfully registered [ 29.289436] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 29.587071] random: crng init done [ 31.053319] EXT4-fs (sda1): re-mounted c5bf84c2-5718-419d-9e09-4c162eede70b r/w. Quota mode: none. [ 33.889948] mv643xx_eth: Set the PHY back to auto-negotiation mode [ 37.695068] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled root@debian:~#
root@debianVM:/home/administrator# dmesg | tail -50 [ 2.272569] EXT4-fs (sda1): re-mounted. Quota mode: none. [ 2.273898] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 2.274128] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.274163] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 2.274968] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 2.275868] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 2.313568] lp: driver loaded but no devices found [ 2.314972] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 2.315224] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 2.322596] systemd[1]: Mounted run-vmblock\x2dfuse.mount - VMware vmblock fuse mount. [ 2.325039] ppdev: user-space parallel port driver [ 2.370457] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ 2.379276] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 2.388049] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 2.389203] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 2.481835] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 2.545946] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 2.569260] systemd[1]: Started systemd-journald.service - Journal Service. [ 2.593025] systemd-journald[253]: Received client request to flush runtime journal. [ 2.714752] audit: type=1400 audit(1709591954.608:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=301 comm="apparmor_parser" [ 2.720243] audit: type=1400 audit(1709591954.616:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=306 comm="apparmor_parser" [ 2.720247] audit: type=1400 audit(1709591954.616:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=306 comm="apparmor_parser" [ 2.737630] audit: type=1400 audit(1709591954.632:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=307 comm="apparmor_parser" [ 2.737636] audit: type=1400 audit(1709591954.632:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=307 comm="apparmor_parser" [ 2.737638] audit: type=1400 audit(1709591954.632:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=307 comm="apparmor_parser" [ 2.737640] audit: type=1400 audit(1709591954.632:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=307 comm="apparmor_parser" [ 2.829046] audit: type=1400 audit(1709591954.724:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=308 comm="apparmor_parser" [ 2.829052] audit: type=1400 audit(1709591954.724:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=308 comm="apparmor_parser" [ 3.009028] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.009052] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 3.136618] ACPI: AC: AC Adapter [ACAD] (on-line) [ 3.382687] Adding 998396k swap on /dev/sda5. Priority:-2 extents:1 across:998396k FS [ 3.437006] vmw_vmci 0000:00:07.7: Using capabilities 0xc [ 3.471882] Guest personality initialized and is active [ 3.471912] VMCI host device registered (name=vmci, major=10, minor=124) [ 3.471913] Initialized host personality [ 3.482005] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 3.582639] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 3.608305] cryptd: max_cpu_qlen set to 1000 [ 3.634844] AVX version of gcm_enc/dec engaged. [ 3.634863] AES CTR mode by8 optimization enabled [ 3.975100] NET: Registered PF_VSOCK protocol family [ 4.449502] NET: Registered PF_QIPCRTR protocol family [ 4.630749] vmxnet3 0000:0b:00.0 ens192: intr type 3, mode 0, 2 vectors allocated [ 4.631292] vmxnet3 0000:0b:00.0 ens192: NIC Link is Up 10000 Mbps [ 7.824914] rfkill: input handler disabled [ 34.198595] rfkill: input handler enabled [ 37.328434] rfkill: input handler disabled [ 228.143423] [drm] vmwgfx: mob memory overflow. Consider increasing guest RAM and graphicsMemory. [ 228.143603] [drm] vmwgfx: increasing guest mob limits to 24576 kB. root@debianVM:/home/administrator#