Help goflexnet

I'm getting crazy

U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:58:11)
Seagate GoFlex Net

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0

NAND read: device 0 offset 0x100000, size 0x300000
 3145728 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-2.6.22.18
   Created:      2009-10-14  20:23:19 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1978544 Bytes = 1.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
Using machid 0xc11 from environment

Starting kernel ...

Uncompressing Linux..........................................................................
.................................................. done, booting the kernel.

and then stops
I can only get in with the serial

U-Boot 2014.07-tld-2 (Sep 20 2014 - 00:58:11)
Seagate GoFlex Net

SoC:   Kirkwood 88F6281_A1
DRAM:  128 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0
88E1116 Initialized on egiga0
Hit any key to stop autoboot:  0
GoFlexNet>  printenv
arcNumber=2678
baudrate=115200
bootargs_root=root=/dev/mtdblock2 ro
bootcmd=nand read.e 0x800000 0x100000 0x300000; setenv bootargs $(console) $(bootargs_root); bootm 0x800000
bootcmd_pogo=fsload uboot-original-mtd0.kwb; go 0x800200
bootcmd_usb=run usb_init; run usb_load_uimage; run set_bootargs_usb; run usb_boot;
bootdelay=3
ceboardver=DISCOVERY:0.1
ceserialno=NA1Y0EG1
cesvcid=5RFAJDGYNLPLDUHN4BWUWC3EKJ
console=console=ttyS0,115200
ethact=egiga0
ethaddr=00:10:75:26:3D:9F
ipaddr=192.168.2.199
led_error=orange blinking
led_exit=green off
led_init=green blinking
machid=c11
mainlineLinux=yes
mtdids=nand0=orion_nand
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
partition=nand0,2
serverip=192.168.2.20
set_bootargs_usb=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts
stderr=serial
stdin=serial
stdout=serial
usb_boot=if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000;else bootm 0x800000;fi;
usb_device=0:1
usb_init=usb start
usb_load_uimage=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage
usb_root=/dev/sda1
usb_rootdelay=10
usb_rootfstype=ext2
x_bootargs=console=ttyS0,115200 mtdparts=orion_nand:1M(u-boot),1M@1M(second_stage_u-boot),3M@2M(kernel),251M@5M(rootfs) rw
x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2
x_bootcmd_kernel=nand read 0x6400000 0x200000 0x300000
x_bootcmd_usb=usb start

Environment size: 1520/131068 bytes
GoFlexNet>

and thre is the tftp-server working

plese HELP

pennello,

What are you trying to boot with? Do you have rootfs on USB, or SATA?

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Hi bodhi

good question

The usb is gone

is there any way to make it bootable without any usb?

if it doesn't make sense how can i make a new one?

thanks to be there



Edited 1 time(s). Last edit at 04/30/2015 04:57PM by pennello.

pennello Wrote:
-------------------------------------------------------
> Hi bodhi
>
> good question
>
> The usb is gone
>
> is there any way to make it bootable without any
> usb?

Yes, but it will boot into stock OS or rescue system without USB.


> if it doesn't make sense how can i make a new
> one?
>

See this rootfs thread to create USB rootfs: http://forum.doozan.com/read.php?2,12096

The easiest rootfs to use is the 3.16.0-kirkwood-tld-2. Scroll down to the section:

Quote

Updated 02 Sept 2014:

Rootfs Debian-3.16.0-kirkwood-tld-2

After that, you can upgrade kernel, jessie, ...

But if you want to go straight to the latest, use 3.18.5

Quote

Updated 24 Feb 2015:

This rootfs is the first Debian jessie rootfs in my Kirkwood kernel/rootfs release series, and to keep in sync with kernel Linux-3.18.5-kirkwood-tld-1.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

Tomorrow I'll try with the 3.18.5 and we see how it goes.
thanks

Hi bodhi

Well, I tried to create usb but I couldn't with serial cable

Can I bring it back to the original?

with these files?

nanddump
rootfs-mtd2-dump
uboot-mtd0-dump
uboot-original
uImage-mtd1-dump

pennello,

You need to create the USB rootfs using another Linux box. If you don't have one, then you can download and boot with Linux Live CD on Windows or MAC.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)



Edited 1 time(s). Last edit at 05/04/2015 07:30PM by bodhi.