Pogoplug pink Boot loop Problems December 15, 2014 03:23PM |
Registered: 9 years ago Posts: 54 |
U-Boot 2011.12 (Feb 20 2012 - 21:21:59) Pogoplug E02 SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found ## Error: "force_rescue_bootcmd" not defined ## Error: "ubifs_bootcmd" not defined ## Error: "usb_bootcmd" not defined stopping USB.. ## Error: "rescue_bootcmd" not defined ## Error: "pogo_bootcmd" not defined resetting ...How can i fix it?
Re: Pogoplug pink Boot loop Problems December 15, 2014 03:30PM |
Registered: 9 years ago Posts: 54 |
u-boot>> printenv arcNumber=3542 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset bootdelay=5 console=ttyS0,115200 ethact=egiga0 ethaddr=02:50:43:e6:fc:df if_netconsole=ping $serverip ipaddr=192.168.178.61 machid=dd6 preboot=run if_netconsole start_netconsole serverip=192.168.178.24 start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 uImage; if ext2load usb $usb_device 0x1100000 uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi usb_init=usb start; if ext2load usb 0:1 0x800000 /boot/uImage; then setenv usb_device 0:1; setenv usb_root /dev/sda1; elif ext2load usb 1:1 0x800000 /boot/uImage; then setenv usb_device 1:1; setenv usb_root /dev/sdb1; elif ext2load usb 2:1 0x800000 /boot/uImage; then setenv usb_device 2:1; setenv usb_root /dev/sdc1; elif ext2load usb 3:1 0x800000 /boot/uImage; then setenv usb_device 3:1;setenv usb_root /dev/sdd1;fi; usb_rootfstype=ext3 usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done usb_scan_1=usb=0:1 dev=sda3 usb_scan_2=usb=1:1 dev=sdb3 usb_scan_3=usb=2:1 dev=sdc3 usb_scan_4=usb=3:1 dev=sdd3 Environment size: 1577/131068 bytes
Re: Pogoplug pink Boot loop Problems December 15, 2014 05:18PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Pogoplug pink Boot loop Problems December 16, 2014 05:35AM |
Registered: 9 years ago Posts: 54 |
Re: Pogoplug pink Boot loop Problems December 16, 2014 03:04PM |
Admin Registered: 13 years ago Posts: 18,821 |
Re: Pogoplug pink Boot loop Problems December 16, 2014 03:25PM |
Registered: 9 years ago Posts: 54 |