Re: Netgear Stora success March 16, 2017 05:23PM |
Registered: 7 years ago Posts: 36 |
Re: Netgear Stora success March 16, 2017 05:26PM |
Registered: 7 years ago Posts: 36 |
Re: Netgear Stora success March 16, 2017 05:35PM |
Admin Registered: 13 years ago Posts: 18,594 |
usb_load_uimage=ext2load usb 0:1 0x200000 /boot/uImage usb_load_uinitrd=ext2load usb 0:1 0x800000 /boot/uInitrd usb_boot=run usb_load_uimage; run usb_load_uinitrd; bootm 0x200000 0x800000 usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd usb_boot=run usb_load_uimage; run usb_load_uinitrd; bootm 0x800000 0x1100000 usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
Re: Netgear Stora success March 17, 2017 03:36AM |
Registered: 7 years ago Posts: 36 |
Marvell>> printenv ... usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd usb_boot=run usb_load_uimage; run usb_load_uinitrd; bootm 0x800000 0x1100000 usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot ... Marvell>> run usb_bootcmd (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found .... . ...... ............ ......................... ................................................... ...................................................................................................... ........................................................................................................ 3166745 bytes read .... . ...... ............ ......................... ................................................... ...................................................................................................... ................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 7179935 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.4.0-kirkwood-tld-1 Created: 2017-03-16 18:54:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3166681 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: initramfs-4.4.0-kirkwood-tld-1 Created: 2016-02-19 7:33:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7179871 Bytes = 6.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel.
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: RD-88F6281A LE U-Boot 1.1.4 (Sep 4 2009 - 09:36:11) Marvell version: 3.4.14 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CEE60 Soc: 88F6281 A0 (DDR2) CPU running @ 1000Mhz L2 running @ 333Mhz SysClock = 333Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 64MB DRAM CS[1] base 0x04000000 size 64MB DRAM Total size 128MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:256 MB CRC in Flash: 84c2e108, Calculated CRC: 84c2e108 CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled Module 0 is RGMII Module 1 is TDM USB 0: host mode PEX 0: interface detected no Link. Net: egiga0, egiga1 [PRIME] Hit any key to stop autoboot: 0 Marvell>> Marvell>> Marvell>> Marvell>> Marvell>> Marvell>> usb reset (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found Marvell>> run usb_boot .... . ...... ............ ......................... ................................................... ...................................................................................................... ........................................................................................................ 3166745 bytes read .... . ...... ............ ......................... ................................................... ...................................................................................................... ................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 7179935 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.4.0-kirkwood-tld-1 Created: 2017-03-16 18:54:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3166681 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: initramfs-4.4.0-kirkwood-tld-1 Created: 2016-02-19 7:33:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7179871 Bytes = 6.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 113620K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 17452K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07d7ef4 (8000 kB) [ 0.000000] .init : 0xc07d8000 - 0xc0822000 ( 296 kB) [ 0.000000] .data : 0xc0822000 - 0xc08b169c ( 574 kB) [ 0.000000] .bss : 0xc08b169c - 0xc08ff9d0 ( 313 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.008253] Console: colour dummy device 80x30 [ 0.012791] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.100740] pid_max: default: 32768 minimum: 301 [ 0.105542] Security Framework initialized [ 0.109837] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.116521] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.124679] Initializing cgroup subsys io [ 0.128845] Initializing cgroup subsys devices [ 0.133389] Initializing cgroup subsys freezer [ 0.137968] Initializing cgroup subsys net_cls [ 0.142578] CPU: Testing write buffer coherency: ok [ 0.148101] Setting up static identity map for 0x8200 - 0x8258 [ 0.154339] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.163821] devtmpfs: initialized [ 0.173405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.183878] prandom: seed boundary self test passed [ 0.193407] prandom: 100 self tests passed [ 0.197600] pinctrl core: initialized pinctrl subsystem [ 0.204567] NET: Registered protocol family 16 [ 0.209618] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.237994] cpuidle: using governor ladder [ 0.267987] cpuidle: using governor menu [ 0.272424] Feroceon L2: Enabling L2 [ 0.276110] Feroceon L2: Cache support initialised. [ 0.281549] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.298635] No ATAGs? [ 0.339746] vgaarb: loaded [ 0.343228] usbcore: registered new interface driver usbfs [ 0.348929] usbcore: registered new interface driver hub [ 0.354391] usbcore: registered new device driver usb [ 0.360806] clocksource: Switched to clocksource orion_clocksource [ 0.434279] NET: Registered protocol family 2 [ 0.439625] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.446810] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.453266] TCP: Hash tables configured (established 1024 bind 1024) [ 0.459750] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.465692] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.472271] NET: Registered protocol family 1 [ 0.477110] RPC: Registered named UNIX socket transport module. [ 0.483151] RPC: Registered udp transport module. [ 0.487919] RPC: Registered tcp transport module. [ 0.492713] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.499564] Unpacking initramfs... [ 1.275582] Freeing initrd memory: 7012K (c1100000 - c17d9000) [ 1.281622] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.289518] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.295796] audit: initializing netlink subsys (disabled) [ 1.301333] audit: type=2000 audit(1.290:1): initialized [ 1.307126] Initialise system trusted keyring [ 1.312039] zbud: loaded [ 1.314991] VFS: Disk quotas dquot_6.6.0 [ 1.319042] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.326770] NFS: Registering the id_resolver key type [ 1.331988] Key type id_resolver registered [ 1.336238] Key type id_legacy registered [ 1.340340] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.347135] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.353831] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.361581] Key type big_key registered [ 1.389469] Key type asymmetric registered [ 1.393917] Asymmetric key parser 'x509' registered [ 1.398963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.406579] io scheduler noop registered [ 1.410577] io scheduler deadline registered [ 1.415057] io scheduler cfq registered (default) [ 1.421520] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 1.429696] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated [ 1.437214] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated [ 1.445190] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00 [ 1.452252] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.458578] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 1.465532] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.471566] PCI: bus0: Fast back to back transfers disabled [ 1.477221] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.485551] PCI: bus1: Fast back to back transfers enabled [ 1.491224] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.496641] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.541649] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.549275] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.591628] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.599573] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.607696] console [ttyS0] disabled [ 1.611475] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 1.620521] console [ttyS0] enabled [ 1.620521] console [ttyS0] enabled [ 1.627669] bootconsole [earlycon0] disabled [ 1.627669] bootconsole [earlycon0] disabled [ 1.637900] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda [ 1.644326] nand: Samsung NAND 256MiB 3,3V 8-bit [ 1.648968] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.656610] Scanning device for bad blocks [ 1.687241] Bad eraseblock 246 at 0x000001ec0000 [ 1.734175] Bad eraseblock 640 at 0x000005000000 [ 1.745222] Bad eraseblock 700 at 0x000005780000 [ 1.750018] Bad eraseblock 702 at 0x0000057c0000 [ 1.815654] Bad eraseblock 1270 at 0x000009ec0000 [ 1.841197] Bad eraseblock 1464 at 0x00000b700000 [ 1.867369] Bad eraseblock 1664 at 0x00000d000000 [ 1.878499] Bad eraseblock 1724 at 0x00000d780000 [ 1.883413] Bad eraseblock 1726 at 0x00000d7c0000 [ 1.892184] Bad eraseblock 1764 at 0x00000dc80000 [ 1.935073] libphy: Fixed MDIO Bus: probed [ 1.939588] libphy: orion_mdio_bus: probed [ 1.949494] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 3.029597] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 3.038567] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.045206] ehci-pci: EHCI PCI platform driver [ 3.049760] ehci-orion: EHCI orion driver [ 3.054128] orion-ehci f1050000.ehci: EHCI Host Controller [ 3.059677] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 3.067659] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 3.090847] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 3.097153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.104014] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.111293] usb usb1: Product: EHCI Host Controller [ 3.116196] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd [ 3.122863] usb usb1: SerialNumber: f1050000.ehci [ 3.128493] hub 1-0:1.0: USB hub found [ 3.132369] hub 1-0:1.0: 1 port detected [ 3.137496] mousedev: PS/2 mouse device common for all mice [ 3.450850] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 3.603292] usb 1-1: New USB device found, idVendor=125f, idProduct=c83a [ 3.610044] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.617251] usb 1-1: Product: A-DATA USB Flash Drive [ 3.622268] usb 1-1: Manufacturer: A-DATA [ 3.626298] usb 1-1: SerialNumber: 06e7cf43be21fe [ 4.150844] rtc-mv f1010300.rtc: internal RTC not ticking [ 4.156516] i2c /dev entries driver [ 4.161244] rtc-pcf8563 0-0051: chip found, driver version 0.4.4 [ 4.173373] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 4.183351] hidraw: raw HID events driver (C) Jiri Kosina [ 4.189241] drop_monitor: Initializing network drop monitor service [ 4.195884] NET: Registered protocol family 17 [ 4.200666] Key type dns_resolver registered [ 4.205955] registered taskstats version 1 [ 4.210138] Loading compiled-in X.509 certificates [ 4.215054] zswap: loaded using pool lzo/zbud [ 4.229799] Key type encrypted registered [ 4.235863] rtc-pcf8563 0-0051: setting system clock to 2017-03-17 08:38:23 UTC (1489739903) [ 4.247750] Freeing unused kernel memory: 296K (c07d8000 - c0822000) Loading, please wait... [ 4.334489] systemd-udevd[80]: starting version 215 [ 4.352015] random: systemd-udevd urandom read with 7 bits of entropy available [ 4.555652] SCSI subsystem initialized [ 4.599354] sata_mv f1080000.sata: slots 32 ports 2 [ 4.609774] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.654024] scsi host0: sata_mv [ 4.660993] scsi host1: usb-storage 1-1:1.0 [ 4.674046] usbcore: registered new interface driver usb-storage [ 4.681028] scsi host2: sata_mv [ 4.684638] ata1: SATA max UDMA/133 irq 33 [ 4.688762] ata2: SATA max UDMA/133 irq 33 [ 4.720181] usbcore: registered new interface driver uas [ 5.240866] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.662410] scsi 1:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2 [ 5.681751] sd 1:0:0:0: [sda] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 5.690411] sd 1:0:0:0: [sda] Write Protect is off [ 5.695956] sd 1:0:0:0: [sda] Asking for cache data failed [ 5.701701] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 5.760911] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133 [ 5.767848] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.810904] ata1.00: configured for UDMA/133 [ 5.817741] sda: sda1 [ 5.824331] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 5.831379] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5 [ 5.841599] sd 0:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5.849167] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ 5.855881] sd 0:0:0:0: [sdb] Write Protect is off [ 5.860951] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.887087] sdb: sdb1 [ 5.891677] sd 0:0:0:0: [sdb] Attached SCSI disk [ 6.200854] ata2: SATA link down (SStatus 0 SControl F300) [ 6.226254] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 6.251393] sd 0:0:0:0: Attached scsi generic sg1 type 0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. modprobe: module unknown not found in modules.dep Begin: Checking file system ... fsck from util-linux 2.25.2 done. mount: can't find /root in /etc/fstab done. Target filesystem doesn't have requested /sbin/init. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory done. No init found. Try passing init= bootarg. modprobe: module i8042 not found in modules.dep [ 7.000633] uhci_hcd: USB Universal Host Controller Interface driver [ 7.017001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.034218] usbcore: registered new interface driver usbhid [ 7.039827] usbhid: USB HID core driver BusyBox v1.22.1 (Debian 1:1.22.0-9+deb8u1) built-in shell (ash) Enter 'help' for a list of built-in commands. /bin/sh: can't access tty; job control turned off (initramfs)
mount: mounting /dev on /root/dev failed: No such file or directory done. No init found. Try passing init= bootarg. modprobe: module i8042 not found in modules.dep
Re: Netgear Stora success March 17, 2017 04:20AM |
Admin Registered: 13 years ago Posts: 18,594 |
usb_load_uimage=ext2load usb 0:1 0x800000 /boot/uImage usb_load_uinitrd=ext2load usb 0:1 0x1100000 /boot/uInitrd usb_boot=run usb_load_uimage; run usb_load_uinitrd; bootm 0x800000 0x1100000 usb_bootcmd=usb start; run usb_init; run usb_set_bootargs; run usb_boot
setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=/dev/sda1'and then
printenv bootargs run usb_bootcmd
Re: Netgear Stora success March 17, 2017 05:08AM |
Registered: 7 years ago Posts: 36 |
Re: Netgear Stora success March 17, 2017 05:41AM |
Admin Registered: 13 years ago Posts: 18,594 |
Re: Netgear Stora success March 17, 2017 06:47AM |
Registered: 7 years ago Posts: 36 |
Re: Netgear Stora success March 17, 2017 04:42PM |
Admin Registered: 13 years ago Posts: 18,594 |
setenv usb_set_bootargs 'setenv bootargs console=$(console) root=$(usb_root) root=LABEL=rootfs'
Re: Netgear Stora success March 17, 2017 05:40PM |
Registered: 7 years ago Posts: 36 |
printenv usb_set_bootargs usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=$usb_rootdelay rootfstype=ext2
__ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: RD-88F6281A LE U-Boot 1.1.4 (Sep 4 2009 - 09:36:11) Marvell version: 3.4.14 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CEE60 Soc: 88F6281 A0 (DDR2) CPU running @ 1000Mhz L2 running @ 333Mhz SysClock = 333Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 64MB DRAM CS[1] base 0x04000000 size 64MB DRAM Total size 128MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:256 MB CRC in Flash: 40465a05, Calculated CRC: 40465a05 CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled Module 0 is RGMII Module 1 is TDM USB 0: host mode PEX 0: interface detected no Link. Net: egiga0, egiga1 [PRIME] Hit any key to stop autoboot: 0 Marvell>> Marvell>> printenv usb_set_bootargs usb_set_bootargs=setenv bootargs console=ttyS0,115200 root=/dev/sda1 rootdelay=$usb_rootdelay rootfstype=ext2 Marvell>> run usb_bootcmd (Re)start USB... USB: scanning bus for devices... 2 USB Device(s) found scanning bus for storage devices... 1 Storage Device(s) found .... . ...... ............ ......................... ................................................... ...................................................................................................... ........................................................................................................ 3166745 bytes read .... . ...... ............ ......................... ................................................... ...................................................................................................... ................................................................................................................................................................................................................. .............................................................................................................................................................................................................................................................................................. 7179935 bytes read ## Booting image at 00800000 ... Image Name: Linux-4.4.0-kirkwood-tld-1 Created: 2017-03-16 18:54:40 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3166681 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 01100000 ... Image Name: initramfs-4.4.0-kirkwood-tld-1 Created: 2016-02-19 7:33:04 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 7179871 Bytes = 6.8 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.0-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 PREEMPT Mon Jan 25 20:35:24 PST 2016 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine model: NETGEAR MS2000 / MS2110 aka Stora [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=$usb_rootdelay rootfstype=ext2 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 113620K/131072K available (6007K kernel code, 573K rwdata, 1992K rodata, 296K init, 312K bss, 17452K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc07d7ef4 (8000 kB) [ 0.000000] .init : 0xc07d8000 - 0xc0822000 ( 296 kB) [ 0.000000] .data : 0xc0822000 - 0xc08b169c ( 574 kB) [ 0.000000] .bss : 0xc08b169c - 0xc08ff9d0 ( 313 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000010] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000388] Console: colour dummy device 80x30 [ 0.000424] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.090107] pid_max: default: 32768 minimum: 301 [ 0.090235] Security Framework initialized [ 0.090325] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090350] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.091295] Initializing cgroup subsys io [ 0.091337] Initializing cgroup subsys devices [ 0.091379] Initializing cgroup subsys freezer [ 0.091409] Initializing cgroup subsys net_cls [ 0.091504] CPU: Testing write buffer coherency: ok [ 0.092027] Setting up static identity map for 0x8200 - 0x8258 [ 0.092402] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x2 [ 0.096757] devtmpfs: initialized [ 0.103048] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.103591] prandom: seed boundary self test passed [ 0.108096] prandom: 100 self tests passed [ 0.108129] pinctrl core: initialized pinctrl subsystem [ 0.109791] NET: Registered protocol family 16 [ 0.110421] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.140126] cpuidle: using governor ladder [ 0.170122] cpuidle: using governor menu [ 0.170618] Feroceon L2: Enabling L2 [ 0.170672] Feroceon L2: Cache support initialised. [ 0.171127] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.177676] No ATAGs? [ 0.211889] vgaarb: loaded [ 0.212337] usbcore: registered new interface driver usbfs [ 0.212437] usbcore: registered new interface driver hub [ 0.212514] usbcore: registered new device driver usb [ 0.213837] clocksource: Switched to clocksource orion_clocksource [ 0.281092] NET: Registered protocol family 2 [ 0.282031] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.282064] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.282089] TCP: Hash tables configured (established 1024 bind 1024) [ 0.282169] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.282198] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.282434] NET: Registered protocol family 1 [ 0.282918] RPC: Registered named UNIX socket transport module. [ 0.282932] RPC: Registered udp transport module. [ 0.282942] RPC: Registered tcp transport module. [ 0.282950] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.283283] Unpacking initramfs... [ 1.046809] Freeing initrd memory: 7012K (c1100000 - c17d9000) [ 1.046958] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.048289] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.048376] audit: initializing netlink subsys (disabled) [ 1.048435] audit: type=2000 audit(1.040:1): initialized [ 1.048863] Initialise system trusted keyring [ 1.049335] zbud: loaded [ 1.049691] VFS: Disk quotas dquot_6.6.0 [ 1.049761] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.050418] NFS: Registering the id_resolver key type [ 1.050462] Key type id_resolver registered [ 1.050473] Key type id_legacy registered [ 1.050505] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.050522] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.050790] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.051423] Key type big_key registered [ 1.075617] Key type asymmetric registered [ 1.075644] Asymmetric key parser 'x509' registered [ 1.075759] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.075784] io scheduler noop registered [ 1.075803] io scheduler deadline registered [ 1.075875] io scheduler cfq registered (default) [ 1.077497] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 1.078319] irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated [ 1.078845] irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated [ 1.079864] mvebu-pcie mbus:pcie-controller: PCI host bridge to bus 0000:00 [ 1.079888] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 1.079904] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 1.079921] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.080400] PCI: bus0: Fast back to back transfers disabled [ 1.080431] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.080683] PCI: bus1: Fast back to back transfers enabled [ 1.080790] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.081186] mv_xor f1060800.xor: Marvell shared XOR driver [ 1.114708] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.115002] mv_xor f1060900.xor: Marvell shared XOR driver [ 1.154660] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 1.155273] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 1.156977] console [ttyS0] disabled [ 1.157052] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 12500000) is a 16550A [ 1.804549] console [ttyS0] enabled [ 1.809594] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xda [ 1.816029] nand: Samsung NAND 256MiB 3,3V 8-bit [ 1.820671] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.828313] Scanning device for bad blocks [ 1.858923] Bad eraseblock 246 at 0x000001ec0000 [ 1.905825] Bad eraseblock 640 at 0x000005000000 [ 1.916865] Bad eraseblock 700 at 0x000005780000 [ 1.921668] Bad eraseblock 702 at 0x0000057c0000 [ 1.987239] Bad eraseblock 1270 at 0x000009ec0000 [ 2.012739] Bad eraseblock 1464 at 0x00000b700000 [ 2.038904] Bad eraseblock 1664 at 0x00000d000000 [ 2.050110] Bad eraseblock 1724 at 0x00000d780000 [ 2.055027] Bad eraseblock 1726 at 0x00000d7c0000 [ 2.063772] Bad eraseblock 1764 at 0x00000dc80000 [ 2.106775] libphy: Fixed MDIO Bus: probed [ 2.111298] libphy: orion_mdio_bus: probed [ 2.121174] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 3.202689] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 [ 3.211653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.218274] ehci-pci: EHCI PCI platform driver [ 3.222829] ehci-orion: EHCI orion driver [ 3.227104] orion-ehci f1050000.ehci: EHCI Host Controller [ 3.232652] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 3.240583] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000 [ 3.263878] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 3.270207] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.277068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.284347] usb usb1: Product: EHCI Host Controller [ 3.289250] usb usb1: Manufacturer: Linux 4.4.0-kirkwood-tld-1 ehci_hcd [ 3.295916] usb usb1: SerialNumber: f1050000.ehci [ 3.301561] hub 1-0:1.0: USB hub found [ 3.305437] hub 1-0:1.0: 1 port detected [ 3.310573] mousedev: PS/2 mouse device common for all mice [ 3.623878] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 3.776339] usb 1-1: New USB device found, idVendor=125f, idProduct=c83a [ 3.783098] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.790296] usb 1-1: Product: A-DATA USB Flash Drive [ 3.795321] usb 1-1: Manufacturer: A-DATA [ 3.799352] usb 1-1: SerialNumber: 06e7cf43be21fe [ 4.323878] rtc-mv f1010300.rtc: internal RTC not ticking [ 4.329559] i2c /dev entries driver [ 4.334291] rtc-pcf8563 0-0051: chip found, driver version 0.4.4 [ 4.346407] rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0 [ 4.356384] hidraw: raw HID events driver (C) Jiri Kosina [ 4.362287] drop_monitor: Initializing network drop monitor service [ 4.368941] NET: Registered protocol family 17 [ 4.373715] Key type dns_resolver registered [ 4.379054] registered taskstats version 1 [ 4.383225] Loading compiled-in X.509 certificates [ 4.388146] zswap: loaded using pool lzo/zbud [ 4.402825] Key type encrypted registered [ 4.408897] rtc-pcf8563 0-0051: setting system clock to 2017-03-17 23:37:50 UTC (1489793870) [ 4.420786] Freeing unused kernel memory: 296K (c07d8000 - c0822000) Loading, please wait... [ 4.510135] systemd-udevd[81]: starting version 215 [ 4.526482] random: systemd-udevd urandom read with 8 bits of entropy available [ 4.730384] SCSI subsystem initialized [ 4.776644] usb-storage 1-1:1.0: USB Mass Storage device detected [ 4.809217] sata_mv f1080000.sata: slots 32 ports 2 [ 4.821206] scsi host0: usb-storage 1-1:1.0 [ 4.836773] usbcore: registered new interface driver usb-storage [ 4.870024] scsi host1: sata_mv [ 4.877697] usbcore: registered new interface driver uas [ 4.892005] scsi host2: sata_mv [ 4.906287] ata1: SATA max UDMA/133 irq 33 [ 4.910413] ata2: SATA max UDMA/133 irq 33 [ 5.283890] ata1: SATA link down (SStatus 0 SControl F300) [ 5.653899] ata2: SATA link down (SStatus 0 SControl F300) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Waiting for root file system ... [ 5.825329] scsi 0:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2 [ 5.841417] sd 0:0:0:0: [sda] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) [ 5.852767] sd 0:0:0:0: [sda] Write Protect is off [ 5.858247] sd 0:0:0:0: [sda] Asking for cache data failed [ 5.863772] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.979908] sda: sda1 [ 5.986503] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.996877] sd 0:0:0:0: Attached scsi generic sg0 type 0 Begin: Running /scripts/local-block ... done. done. Begin: Checking root file system ... fsck from util-linux 2.25.2 rootfs: clean, 14836/247008 files, 198574/986880 blocks done. done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 8.507637] systemd-udevd[290]: starting version 215 . ok [....] Synthesizing the initial hotplug events...[ 8.820448] input: gpio-keys as /devices/platform/gpio-keys/input/input0 done. [....] Waiting for /dev to be fully populated...[ 9.065234] lm75 0-0048: hwmon0: sensor 'lm75' [ 9.119171] orion_wdt: Initial timeout 21 sec [ 9.200596] marvell-cesa: probe of f1030000.crypto failed with error -524 [ 9.318734] random: nonblocking pool is initialized done. [ ok ] Activating swap...done. [....] Checking root file system...fsck from util-linux 2.25.2 rootfs: clean, 14836/247008 files, 198574/986880 blocks done. [ ok ] Activating lvm and md swap...done. [....] Checking file systems...fsck from util-linux 2.25.2 done. [ ok ] Loading kernel modules...done. [ ok ] Cleaning up temporary files... /tmp. [ ok ] Mounting local filesystems...done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [ 13.593304] NET: Registered protocol family 10 [ 14.776511] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1 Copyright 2004-2014 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:50:43:00:02:02 Sending on LPF/eth0/00:50:43:00:02:02 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 [ 17.813774] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 17.823710] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPOFFER from 192.168.1.1 DHCPACK from 192.168.1.1 bound to 192.168.1.217 -- renewal in 38664 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1233 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [ ok ] Starting NTP server: ntpd. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1236 (klogd) . ok [ ok ] Starting OpenBSD Secure Shell server: sshd. Debian GNU/Linux 8 debian ttyS0 debian login:
Re: Netgear Stora success March 17, 2017 08:07PM |
Admin Registered: 13 years ago Posts: 18,594 |
Re: Netgear Stora success March 18, 2017 07:10AM |
Registered: 7 years ago Posts: 36 |
setenv usb_set_bootargs 'setenv bootargs console=$(console) root=$(usb_root) root=LABEL=rootfs'
Marvell>> setenv usb_root 'LABEL=rootfs' Marvell>> printenv usb_rootfstype usb_rootfstype=ext2 Marvell>> printenv usb_rootdelay usb_rootdelay=10 Marvell>>print usb_set_bootargs usb_set_bootargs=setenv bootargs $(console) root=$(usb_root) rootfstype=$(usb_rootfstype) rootdelay=$(usb_rootdelay)
Re: Netgear Stora success March 18, 2017 02:01PM |
Admin Registered: 13 years ago Posts: 18,594 |
> setenv usb_set_bootargs 'setenv bootargs console=$ > (console) root=$(usb_root) root=LABEL=rootfs' >>
> Marvell>> setenv usb_root 'LABEL=rootfs' > Marvell>> printenv usb_rootfstype > usb_rootfstype=ext2 > Marvell>> printenv usb_rootdelay > usb_rootdelay=10 > > Marvell>>print usb_set_bootargs > usb_set_bootargs=setenv bootargs $(console) root=$ > (usb_root) rootfstype=$(usb_rootfstype) rootdelay= > $(usb_rootdelay) >>