ZyXel NSA325 V1 - Erased NAND what now

Hey all,

I was playing with fire and made a fundamental mistake with the command erase nand in uBoot. I am trying to write/flash the uBoot now, but I think I managed to brick it completely. When connected to Serial, I don't have any input options. Can someone confirm if it is possible to restore or if it is impossible at that point.

Thanks for any reply :)

You can now do some research on kwboot / jtag...

vex88,

As David said above, you need to run kwboot to recover. No need for JTAG yet.

You need another Linux box to run kwboot from. See here for example:

https://forum.doozan.com/read.php?3,51739,51919#msg-51919

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)