Re: revive Medion oxnas stg-212 April 19, 2023 10:52PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 April 19, 2023 10:57PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 April 19, 2023 11:06PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 April 19, 2023 11:48PM |
Registered: 6 years ago Posts: 103 |
root@OpenWrt:# cat /proc/mtd dev: size erasesize name mtd0: 00040000 00020000 "stage1" mtd1: 00380000 00020000 "u-boot" mtd2: 00080000 00020000 "u-boot-env" mtd3: 009c0000 00020000 "kernel" mtd4: 07200000 00020000 "ubi"
root@OpenWrt:# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.188 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16554-1d4dea6d4f)) #0 SMP Sat Apr 16 12:59:34 2022 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x64000000 [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 15 pages/cpu s29772 r8192 d23476 u61440 [ 0.000000] pcpu-alloc: s29772 r8192 d23476 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 [ 0.000000] Bootloader command line (ignored): console=ttyS0,115200 elevator=cfq mac_adr=0x00,0x30,0xe0,0x00,0x00,0x01 mem=128M poweroutage=yes [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 55380K/131072K available (6144K kernel code, 171K rwdata, 788K rodata, 1024K init, 214K bss, 10156K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 32 irqs, parent IRQ: 16 [ 0.000000] random: get_random_bytes called from 0xc0800b88 with crng_init=0 [ 0.000020] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000071] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000087] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.000115] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.000279] GIC: PPI13 is secure or misconfigured [ 0.000335] GIC: PPI13 is secure or misconfigured [ 0.000453] Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992) [ 0.070315] pid_max: default: 32768 minimum: 301 [ 0.070686] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.070712] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.072140] CPU: Testing write buffer coherency: ok [ 0.074147] Setting up static identity map for 0x60100000 - 0x6010005c [ 0.074437] rcu: Hierarchical SRCU implementation. [ 0.075164] smp: Bringing up secondary CPUs ... [ 0.076270] GIC: PPI13 is secure or misconfigured [ 0.140697] smp: Brought up 1 node, 2 CPUs [ 0.140733] SMP: Total of 2 processors activated (598.42 BogoMIPS). [ 0.145697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.145733] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.152471] pinctrl core: initialized pinctrl subsystem [ 0.153390] NET: Registered protocol family 16 [ 0.157923] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.160588] cpuidle: using governor menu [ 0.160688] No ATAGs? [ 0.180733] pps_core: LinuxPPS API ver. 1 registered [ 0.180753] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.180792] PTP clock support registered [ 0.181990] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 0.183331] thermal_sys: Registered thermal governor 'step_wise' [ 0.183720] NET: Registered protocol family 2 [ 0.183912] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.184942] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.185024] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.185059] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.185098] TCP: Hash tables configured (established 1024 bind 1024) [ 0.185272] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.185328] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.185743] NET: Registered protocol family 1 [ 0.185802] PCI: CLS 0 bytes, default 32 [ 0.187699] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.200079] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.201052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.204044] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [ 0.208261] printk: console [ttyS0] disabled [ 0.208430] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 0.656263] printk: console [ttyS0] enabled [ 0.678149] brd: module loaded [ 0.692623] loop: module loaded [ 0.762209] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.768542] nand: Hynix H27U1G8F2BTR-BC [ 0.772423] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.779983] Scanning device for bad blocks [ 0.788595] Bad eraseblock 54 at 0x0000006c0000 [ 0.854643] Bad eraseblock 802 at 0x000006440000 [ 0.864238] Bad eraseblock 863 at 0x000006be0000 [ 0.882032] 5 fixed-partitions partitions found on MTD device 41000000.nand-controller [ 0.889917] Creating 5 MTD partitions on "41000000.nand-controller": [ 0.896279] 0x000000000000-0x000000040000 : "stage1" [ 0.903265] 0x000000040000-0x0000003c0000 : "u-boot" [ 0.909975] 0x0000003c0000-0x000000440000 : "u-boot-env" [ 0.917219] 0x000000440000-0x000000e00000 : "kernel" [ 0.924183] 0x000000e00000-0x000008000000 : "ubi" [ 0.932620] oxnas-dwmac 40400000.ethernet: IRQ eth_lpi not found [ 0.938746] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 0.944629] oxnas-dwmac 40400000.ethernet: no reset control found [ 1.012416] oxnas-dwmac 40400000.ethernet: User ID: 0x12, Synopsys ID: 0x35 [ 1.019368] oxnas-dwmac 40400000.ethernet: DWMAC1000 [ 1.024453] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 1.031731] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 1.039045] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 1.044106] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 1.050949] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 1.057280] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 1.064084] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 1.070671] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 1.076336] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 1.084175] oxnas-dwmac 40400000.ethernet: device MAC address be:16:90:e7:c8:ec [ 1.102077] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 1.114634] RTL8211E Gigabit Ethernet stmmac-0:07: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:07, irq=POLL) [ 1.129712] ledtrig-cpu: registered to indicate activity on CPUs [ 1.135912] hidraw: raw HID events driver (C) Jiri Kosina [ 1.142935] NET: Registered protocol family 10 [ 1.149048] Segment Routing with IPv6 [ 1.152936] NET: Registered protocol family 17 [ 1.157468] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.170442] 8021q: 802.1Q VLAN Support v1.8 [ 1.181457] UBI: auto-attach mtd4 [ 1.184872] ubi0: attaching mtd4 [ 1.322554] ubi0: scanning is finished [ 1.336294] ubi0: attached mtd4 (name "ubi", size 114 MiB) [ 1.341762] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 1.348697] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 1.355404] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 [ 1.362196] ubi0: good PEBs: 910, bad PEBs: 2, corrupted PEBs: 0 [ 1.368174] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 1.375395] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1170219428 [ 1.384517] ubi0: available PEBs: 0, total reserved PEBs: 910, PEBs reserved for bad PEB handling: 18 [ 1.395320] block ubiblock0_0: created from ubi0:0(rootfs) [ 1.400791] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 1.407831] hctosys: unable to open rtc device (rtc0) [ 1.407869] ubi0: background thread "ubi_bgt0d" started, PID 49 [ 1.425431] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 1.434334] Freeing unused kernel memory: 1024K [ 1.472263] Run /sbin/init as init process [ 1.857671] init: Console is alive [ 2.659238] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 2.745464] usbcore: registered new interface driver usbfs [ 2.751001] usbcore: registered new interface driver hub [ 2.756472] usbcore: registered new device driver usb [ 2.763184] Button Hotplug driver version 0.4.1 [ 2.888808] SGI XFS with security attributes, no debug enabled [ 2.908587] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.921387] SCSI subsystem initialized [ 2.928330] ehci-fsl: Freescale EHCI Host controller driver [ 2.935185] ehci-platform: EHCI generic platform driver [ 2.949073] libata version 3.00 loaded. [ 3.235837] scsi host0: sata_oxnas [ 3.295936] ata1: SATA max UDMA/133 irq 57 [ 3.300354] sata_oxnas: resetting SATA core [ 3.644008] ata1: SATA link down (SStatus 0 SControl 300) [ 3.852042] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 3.857564] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 3.866071] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 3.902031] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 3.909278] hub 1-0:1.0: USB hub found [ 3.913169] hub 1-0:1.0: 2 ports detected [ 3.920942] input: keys as /devices/platform/keys/input/input0 [ 3.927441] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 3.942886] init: - preinit - [ 4.332098] usb 1-2: new high-speed USB device number 2 using oxnas-ehci [ 4.541020] random: procd: uninitialized urandom read (4 bytes read) [ 4.827097] random: jshn: uninitialized urandom read (4 bytes read) [ 4.876746] random: jshn: uninitialized urandom read (4 bytes read) [ 4.944092] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] [ 4.962094] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 4.969479] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 4.978155] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 4.984583] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode [ 8.152721] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 8.160993] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.286755] mount_root: loading kmods from internal overlay [ 9.312816] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 9.321638] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 9.639554] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 9.645606] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 128 [ 9.684188] UBIFS (ubi0:1): recovery needed [ 9.800064] UBIFS (ubi0:1): recovery completed [ 9.805483] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.813347] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.823275] UBIFS (ubi0:1): FS size: 109541376 bytes (104 MiB, 849 LEBs), journal size 5548032 bytes (5 MiB, 43 LEBs) [ 9.833881] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) [ 9.840471] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D792E31B-6D8C-41C5-8C3F-B28695846406, small LPT model [ 9.852669] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 9.862036] block: extroot: not configured [ 9.866503] UBIFS (ubi0:1): un-mount UBI device 0 [ 9.871234] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops [ 9.883599] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 9.889730] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 129 [ 9.977413] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 9.985282] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.995189] UBIFS (ubi0:1): FS size: 109541376 bytes (104 MiB, 849 LEBs), journal size 5548032 bytes (5 MiB, 43 LEBs) [ 10.005785] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB) [ 10.012405] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D792E31B-6D8C-41C5-8C3F-B28695846406, small LPT model [ 10.204236] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 10.213460] block: extroot: not configured [ 10.219427] mount_root: switching to ubifs overlay [ 10.233292] urandom-seed: Seeding with /etc/urandom.seed [ 10.336944] oxnas-dwmac 40400000.ethernet eth0: Link is Down [ 10.355371] procd: - early - [ 10.974056] procd: - ubus - [ 11.034672] urandom_read: 1 callbacks suppressed [ 11.034690] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.047513] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.054899] random: ubusd: uninitialized urandom read (4 bytes read) [ 11.064780] procd: - init - [ 11.977349] urngd: v1.0.2 started. [ 12.095505] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.160550] crng init done [ 12.163366] random: 3 urandom warning(s) missed due to ratelimiting [ 12.187788] xt_time: kernel timezone is -0000 [ 12.216540] kmodloader: done loading kernel modules from /etc/modules.d/* [ 17.306119] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] [ 17.341196] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 17.348702] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 17.357442] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 17.363937] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode [ 17.382359] br-lan: port 1(eth0) entered blocking state [ 17.387619] br-lan: port 1(eth0) entered disabled state [ 17.393361] device eth0 entered promiscuous mode [ 22.552719] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 22.561003] br-lan: port 1(eth0) entered blocking state [ 22.566300] br-lan: port 1(eth0) entered forwarding state [ 22.572771] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 219.594603] br-lan: port 1(eth0) entered disabled state [ 219.602585] device eth0 left promiscuous mode [ 219.607032] br-lan: port 1(eth0) entered disabled state [ 219.655393] oxnas-dwmac 40400000.ethernet eth0: Link is Down [ 221.594938] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] [ 221.632217] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 221.639656] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 221.648560] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 221.654999] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode [ 221.683136] br-lan: port 1(eth0) entered blocking state [ 221.688363] br-lan: port 1(eth0) entered disabled state [ 221.694307] device eth0 entered promiscuous mode [ 224.792778] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 224.801057] br-lan: port 1(eth0) entered blocking state [ 224.806353] br-lan: port 1(eth0) entered forwarding state [ 224.812277] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [16718.032076] kmodloader: loading kernel modules from /etc/modules.d/* [16718.104424] usb-storage 1-2:1.0: USB Mass Storage device detected [16718.111751] scsi host1: usb-storage 1-2:1.0 [16718.117196] usbcore: registered new interface driver usb-storage [16718.123712] kmodloader: done loading kernel modules from /etc/modules.d/* [16719.137584] scsi 1:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0 [16719.252014] sd 1:0:0:0: [sda] 1984000 512-byte logical blocks: (1.02 GB/969 MiB) [16719.260748] sd 1:0:0:0: [sda] Write Protect is off [16719.265669] sd 1:0:0:0: [sda] Mode Sense: 03 00 00 00 [16719.272250] sd 1:0:0:0: [sda] No Caching mode page found [16719.277667] sd 1:0:0:0: [sda] Assuming drive cache: write through [16719.290961] sda: sda1 [16719.299978] sd 1:0:0:0: [sda] Attached SCSI removable disk [16831.740759] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [16831.895567] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Re: revive Medion oxnas stg-212 April 20, 2023 12:58PM |
Registered: 6 years ago Posts: 103 |
Stage-1 Bootloader Tue Aug 9 16:44:00 CST 2011 Attempting to set PLLA to 750MHz ... plla_ctrl0 : 0x0000000A plla_ctrl1 : 0x000F0000 plla_ctrl2 : 0x001D01A0 plla_ctrl3 : 0x00000017 PLLA Set Setup memory, testing Reading NAND, Image 0 Hdr len: 0x0001A94C Hdr CRC: 0xF0019DAC OK U-Boot 1.1.2 (Jun 24 2011 - 09:41:57) U-Boot code: 60D00000 -> 60D1A94C BSS: -> 60D1F004 RAM Configuration: Bank #0: 60000000 128 MB SRAM Configuration: 64KB at 0x50000000 NAND:128 MiB In: serial Out: serial Err: serial Setting Linux mem= boot arg value Hit any key to stop autoboot: 0 Loading from device 0: 128MiB 3,3V 8-bit (offset 0x440000) Image Name: ARM OpenWrt Linux-5.4.188 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3575077 Bytes = 3.4 MB Load Address: 60008000 Entry Point: 60008000 ## Booting image at 61000000 ... Image Name: ARM OpenWrt Linux-5.4.188 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3575077 Bytes = 3.4 MB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK OK Starting kernel ...final conclusion: spending hundrets of hours on an defective device! :-D but learning quite a lot about u-boots, rootfs, kernels, nand, envs, mtds and so on. bodhi, thanks again for all your time, patience and support, going this way with me. back to productive usage of the new device now (finally!). ;-) let me know if you need anything else to know about stg-212/oxnas and i'm giving my best to contribute.
Re: revive Medion oxnas stg-212 April 20, 2023 03:30PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 April 20, 2023 09:14PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 April 20, 2023 10:27PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 April 22, 2023 06:52AM |
Registered: 6 years ago Posts: 103 |
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS DRAM: 128 MiB IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512) NAND: 128 MiB reading u-boot.env In: serial Out: serial Err: serial Net: mii0 ## Error: "safeboot" not defined Hit any key to stop autoboot: 0 4609927 bytes read in 613 ms (7.2 MiB/s) 9479 bytes read in 7 ms (1.3 MiB/s) magic: 0xd00dfeed totalsize: 0x2507 (9479) off_dt_struct: 0x38 off_dt_strings: 0x217c off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x38b size_dt_struct: 0x2144 number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4609863 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2b506 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212 [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 15 pages/cpu s29548 r8192 d23700 u61440 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: earlyprintk console=ttyS0,115200 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 119028K/131072K available (7168K kernel code, 199K rwdata, 1524K rodata, 1024K init, 245K bss, 12044K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff800000 ( 880 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB) [ 0.000000] .init : 0xc0a00000 - 0xc0b00000 (1024 kB) [ 0.000000] .data : 0xc0b00000 - 0xc0b31f68 ( 200 kB) [ 0.000000] .bss : 0xc0b383b8 - 0xc0b757c0 ( 246 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ c8804000, 32 irqs, parent IRQ: 16 [ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.008171] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.018900] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.025057] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.033592] GIC: PPI13 is secure or misconfigured [ 0.038400] GIC: PPI13 is secure or misconfigured [ 0.043333] Console: colour dummy device 80x30 [ 0.047874] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.094817] pid_max: default: 32768 minimum: 301 [ 0.099778] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.106462] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.114629] CPU: Testing write buffer coherency: ok [ 0.158563] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.165391] Hierarchical SRCU implementation. [ 0.208460] smp: Bringing up secondary CPUs ... [ 0.258577] GIC: PPI13 is secure or misconfigured [ 0.318776] smp: Brought up 1 node, 2 CPUs [ 0.327708] SMP: Total of 2 processors activated (638.97 BogoMIPS). [ 0.334748] devtmpfs: initialized [ 0.344199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.354155] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.360673] prandom: seed boundary self test passed [ 0.370099] prandom: 100 self tests passed [ 0.374264] pinctrl core: initialized pinctrl subsystem [ 0.380326] NET: Registered protocol family 16 [ 0.386496] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.395960] cpuidle: using governor ladder [ 0.400253] cpuidle: using governor menu [ 0.423751] vgaarb: loaded [ 0.427056] SCSI subsystem initialized [ 0.431726] usbcore: registered new interface driver usbfs [ 0.437352] usbcore: registered new interface driver hub [ 0.442977] usbcore: registered new device driver usb [ 0.448279] pps_core: LinuxPPS API ver. 1 registered [ 0.453388] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.462653] PTP clock support registered [ 0.467694] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 0.491392] NET: Registered protocol family 2 [ 0.496719] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.503825] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.510300] TCP: Hash tables configured (established 1024 bind 1024) [ 0.516869] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.522851] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.529512] NET: Registered protocol family 1 [ 0.534766] RPC: Registered named UNIX socket transport module. [ 0.540805] RPC: Registered udp transport module. [ 0.545571] RPC: Registered tcp transport module. [ 0.550374] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.558632] Initialise system trusted keyrings [ 0.563189] Key type blacklist registered [ 0.567552] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 0.581068] zbud: loaded [ 0.588741] NFS: Registering the id_resolver key type [ 0.593884] Key type id_resolver registered [ 0.598231] Key type id_legacy registered [ 0.602332] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.609136] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.616424] fuse init (API version 7.26) [ 0.621460] orangefs_debugfs_init: called with debug mask: :none: :0: [ 0.628311] orangefs_init: module version upstream loaded [ 2.705267] Key type asymmetric registered [ 2.709506] Asymmetric key parser 'x509' registered [ 2.714544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.722058] io scheduler noop registered [ 2.726046] io scheduler deadline registered [ 2.730516] io scheduler cfq registered (default) [ 2.737064] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.745047] console [ttyS0] disabled [ 2.748907] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 2.757875] console [ttyS0] enabled [ 2.757875] console [ttyS0] enabled [ 2.764894] bootconsole [earlycon0] disabled [ 2.764894] bootconsole [earlycon0] disabled [ 2.784988] loop: module loaded [ 2.790026] scsi host0: sata_oxnas [ 2.793733] ata1: SATA max UDMA/133 irq 57 [ 2.797995] sata_oxnas: resetting SATA core [ 2.867932] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 2.874265] nand: Hynix H27U1G8F2BTR-BC [ 2.878138] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 2.885688] Scanning device for bad blocks [ 2.894251] Bad eraseblock 54 at 0x0000006c0000 [ 2.959961] Bad eraseblock 802 at 0x000006440000 [ 2.969530] Bad eraseblock 863 at 0x000006be0000 [ 2.987276] 2 ofpart partitions found on MTD device 41000000.nand-controller [ 2.994327] Creating 2 MTD partitions on "41000000.nand-controller": [ 3.000706] 0x000000000000-0x000000e00000 : "boot" [ 3.007157] 0x000000e00000-0x000008000000 : "ubi" [ 3.015121] libphy: Fixed MDIO Bus: probed [ 3.019704] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 3.025523] oxnas-dwmac 40400000.ethernet: no reset control found [ 3.097781] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 3.102881] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 3.108608] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 3.115929] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 3.122762] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 3.129420] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 3.136742] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 3.141908] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 3.148794] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 3.155056] oxnas-dwmac 40400000.ethernet (unnamed net_device) (uninitialized): device MAC address ae:ba:19:c7:74:bb [ 3.165568] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.182924] libphy: stmmac: probed [ 3.186332] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 3.195827] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 3.206338] PPP generic driver version 2.4.2 [ 3.210992] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.217497] ehci-pci: EHCI PCI platform driver [ 3.307752] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.314327] ata1.00: supports DRM functions and may not be fully accessible [ 3.321323] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR070, max UDMA/133 [ 3.328294] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.427765] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 3.433303] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 3.441223] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 3.467763] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 3.474096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.480916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.488143] usb usb1: Product: EHCI Host Controller [ 3.492997] usb usb1: Manufacturer: Linux 4.14.180-oxnas-tld-1 ehci_hcd [ 3.499614] usb usb1: SerialNumber: 40200100.ehci [ 3.505136] hub 1-0:1.0: USB hub found [ 3.509071] hub 1-0:1.0: 2 ports detected [ 3.514112] usbcore: registered new interface driver cdc_wdm [ 3.519956] usbcore: registered new interface driver usb-storage [ 3.526105] usbcore: registered new interface driver usbserial [ 3.532101] usbcore: registered new interface driver usbserial_generic [ 3.538705] usbserial: USB Serial support registered for generic [ 3.545000] mousedev: PS/2 mouse device common for all mice [ 3.550794] i2c /dev entries driver [ 3.555691] hidraw: raw HID events driver (C) Jiri Kosina [ 3.561344] usbcore: registered new interface driver usbhid [ 3.566894] usbhid: USB HID core driver [ 3.572295] NET: Registered protocol family 10 [ 3.578296] Segment Routing with IPv6 [ 3.582033] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.589818] NET: Registered protocol family 17 [ 3.594362] Key type dns_resolver registered [ 3.599856] registered taskstats version 1 [ 3.603937] Loading compiled-in X.509 certificates [ 3.608872] zswap: loaded using pool lzo/zbud [ 3.621570] Key type big_key registered [ 3.628241] Key type encrypted registered [ 3.634314] hctosys: unable to open rtc device (rtc0) [ 8.357793] ata1.00: qc timeout (cmd 0x47) [ 8.361879] sata_oxnas: resetting SATA core [ 8.699655] ata1.00: READ LOG DMA EXT failed, trying PIO [ 8.704954] ata1.00: ATA Identify Device Log not supported [ 8.710464] ata1.00: Security Log not supported [ 8.715008] ata1.00: failed to set xfermode (err_mask=0x40) [ 9.217748] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9.224314] ata1.00: supports DRM functions and may not be fully accessible [ 9.233704] ata1.00: supports DRM functions and may not be fully accessible [ 9.242762] ata1.00: configured for UDMA/133 [ 9.247618] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R070 PQ: 0 ANSI: 5 [ 9.256965] ata1.00: Enabling discard_zeroes_data [ 9.262609] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB) [ 9.270302] sd 0:0:0:0: [sda] Write Protect is off [ 9.275289] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.285468] ata1.00: Enabling discard_zeroes_data [ 9.292016] sda: sda1 sda2 sda3 [ 9.296878] ata1.00: Enabling discard_zeroes_data [ 9.303009] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.308096] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 9.315548] Please append a correct "root=" boot option; here are the available partitions: [ 9.323980] 1f00 14336 mtdblock0 [ 9.323988] (driver?) [ 9.330544] 1f01 116736 mtdblock1 [ 9.330552] (driver?) [ 9.337054] 0800 268617384 sda [ 9.337059] driver: sd [ 9.343173] 0801 16384 sda1 00008000-01 [ 9.343180] [ 9.349557] 0802 4194304 sda2 00008000-02 9.349565] [ 9.355896] 0803 264405672 sda3 00008000-03 [ 9.355904] [ 9.362283] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 9.370516] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1 [ 9.377612] Hardware name: Generic DT based system [ 9.382407] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14) [ 9.390128] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0) [ 9.397335] [<c07384cc>] (dump_stack) from [<c0111b88>] (panic+0xec/0x268) [ 9.404198] [<c0111b88>] (panic) from [<c0a012bc>] (mount_block_root+0x1e0/0x2a8) [ 9.411653] [<c0a012bc>] (mount_block_root) from [<c0a0146c>] (mount_root+0xe8/0x128) [ 9.419456] [<c0a0146c>] (mount_root) from [<c0a015dc>] (prepare_namespace+0x130/0x194) [ 9.427430] [<c0a015dc>] (prepare_namespace) from [<c0a00e5c>] (kernel_init_freeable+0x17c/0x1c4) [ 9.436267] [<c0a00e5c>] (kernel_init_freeable) from [<c074b198>] (kernel_init+0x8/0x110) [ 9.444413] [<c074b198>] (kernel_init) from [<c01029b8>] (ret_from_fork+0x14/0x3c) [ 9.451968] CPU0: stopping [ 9.454673] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1 [ 9.461770] Hardware name: Generic DT based system [ 9.466557] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14) [ 9.474275] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0) [ 9.481477] [<c07384cc>] (dump_stack) from [<c01082a8>] (handle_IPI+0x190/0x1dc) [ 9.488847] [<c01082a8>] (handle_IPI) from [<c01014c8>] (gic_handle_irq+0x7c/0x8c) [ 9.496391] [<c01014c8>] (gic_handle_irq) from [<c0106278>] (__irq_svc+0x58/0x8c) [ 9.503836] Exception stack(0xc0b01f28 to 0xc0b01f70) [ 9.508866] 1f20: 00000001 00000000 00000000 00000000 00000000 ffffe000 [ 9.517012] 1f40: c0b03ae4 c0b03a88 00000000 00000000 c0a39e68 c08f607c 00000000 c0b01f78 [ 9.525150] 1f60: c0103278 c010327c 60000113 ffffffff [ 9.530186] [<c0106278>] (__irq_svc) from [<c010327c>] (arch_cpu_idle+0x28/0x30) [ 9.537559] [<c010327c>] (arch_cpu_idle) from [<c0149f5c>] (do_idle+0x180/0x1d4) [ 9.544931] [<c0149f5c>] (do_idle) from [<c014a270>] (cpu_startup_entry+0x18/0x1c) [ 9.552473] [<c014a270>] (cpu_startup_entry) from [<c0a00c50>] (start_kernel+0x368/0x3f8) [ 9.560619] [<c0a00c50>] (start_kernel) from [<60008074>] (0x60008074) [ 9.567127] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
OX820 # printenv SET_dtb=fdt addr ${fdtaddr} ; fdt header autoload=no baudrate=115200 bootcmd=run ideboot bootdelay=3 bootnew=bootm 60000000 - 61000000 bootold=bootm 60000000 console=console=ttyS0,115200n8 ethact=mii0 ethaddr=06:05:C2:E8:D1:88 ext2_dtb=ext2load ide 0:2 61000000 /boot/dts/ox820-stg212.dtb ext2_ideboot=run ext2_uimage ; run ext2_dtb ; run SET_dtb ; run bootnew ext2_uimage=ext2load ide 0:2 60000000 /boot/uImage ext4_dtb=ext4load ide 0:2 61000000 /boot/dts/ox820-stg212.dtb ext4_ideboot=run ext4_uimage ; run ext4_dtb ; run SET_dtb ; run bootnew ext4_uimage=ext4load ide 0:2 60000000 /boot/uImage fdtaddr=61000000 filesize=1b79 ideboot=run ext2_ideboot idebootold=${loadold} ;${bootold} imgaddr=60000000 ipaddr=192.168.0.10 keypressed=1 mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net console preboot=run safeboot serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;echo switch to serial console stderr=serial stdin=serial stdout=serial updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400i guess all requirements are fullfilled!? having rootfs partition with /boot/uImage and uInitrd (ok, i just see - they have to be on partition 1, thats not the case with booting from rescue disk, as partition 1 includes "newer" u-boot so far)... but not sure if this also is valid for 2013 u-boot?
Re: revive Medion oxnas stg-212 April 22, 2023 08:19AM |
Registered: 6 years ago Posts: 103 |
U-Boot SPL 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) Boot device: SATA Attempting to set PLLA to 800 MHz ... plla_ctrl0 : 0000030a plla_ctrl1 : 00400000 plla_ctrl2 : 007f0068 plla_ctrl3 : 00000193 PLLA Set Bus 0: OK Device 0: reading bootargs.bin reading u-boot.img reading u-boot.img U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS DRAM: 128 MiB IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512) NAND: 128 MiB reading u-boot.env In: serial Out: serial Err: serial Net: mii0 ## Error: "safeboot" not defined Hit any key to stop autoboot: 0 4102704 bytes read in 545 ms (7.2 MiB/s) 7033 bytes read in 7 ms (980.5 KiB/s) magic: 0xd00dfeed totalsize: 0x1b79 (7033) DRAM: 128 MiB IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512) NAND: 128 MiB reading u-boot.env In: serial Out: serial Err: serial Net: mii0 ## Error: "safeboot" not defined Hit any key to stop autoboot: 0 4102704 bytes read in 545 ms (7.2 MiB/s) 7033 bytes read in 7 ms (980.5 KiB/s) magic: 0xd00dfeed totalsize: 0x1b79 (7033) off_dt_struct: 0x38 off_dt_strings: 0x18d4 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x2a5 size_dt_struct: 0x189c number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-3.17.0-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4102640 Bytes = 3.9 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 off_dt_struct: 0x38 off_dt_strings: 0x18d4 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 boot_cpuid_phys: 0x0 size_dt_strings: 0x2a5 size_dt_struct: 0x189c number mem_rsv: 0x0 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-3.17.0-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4102640 Bytes = 3.9 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2ab78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 7 pages/cpu @c7ee3000 s6592 r8192 d13888 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2ab78 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.17.0-oxnas-tld-1 (root@tldDebian) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Sat Oct 25 15:59:43 PDT 2014 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Pogoplug Pro [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map [ 0.000000] Start Ox820 platform [ 0.000000] PERCPU: Embedded 7 pages/cpu @c7ee3000 s6592 r8192 d13888 u32768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 ubi.mtd=data,512 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 121756K/131072K available (5686K kernel code, 286K rwdata, 1680K rodata, 174K init, 233K bss, 9316K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0739db0 (7368 kB) [ 0.000000] .init : 0xc073a000 - 0xc07659c0 ( 175 kB) [ 0.000000] .data : 0xc0766000 - 0xc07adb00 ( 287 kB) [ 0.000000] .bss : 0xc07adb00 - 0xc07e809c ( 234 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/sda2 rootfstype=ext4 ubi.mtd=data,512 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 121756K/131072K available (5686K kernel code, 286K rwdata, 1680K rodata, 174K init, 233K bss, 9316K reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : 0xc0008000 - 0xc0739db0 (7368 kB) [ 0.000000] .init : 0xc073a000 - 0xc07659c0 ( 175 kB) [ 0.000000] .data : 0xc0766000 - 0xc07adb00 ( 287 kB) [ 0.000000] .bss : 0xc07adb00 - 0xc07e809c ( 234 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:160 [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000192] Console: colour dummy device 80x30 [ 0.000220] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050058] pid_max: default: 32768 minimum: 301 [ 0.050229] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050250] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051118] Initializing cgroup subsys net_cls [ 0.051182] CPU: Testing write buffer coherency: ok [ 0.051589] Setting up static identity map for 0x60567fa0 - 0x60567fd8 [ 0.110474] CPU1: Booted secondary processor [ 0.170160] Brought up 2 CPUs [ 0.170186] SMP: Total of 2 processors activated. [ 0.171166] devtmpfs: initialized [ 0.175861] prandom: seed boundary self test passed [ 0.180072] prandom: 100 self tests passed [ 0.180098] pinctrl core: initialized pinctrl subsystem [ 0.182878] NET: Registered protocol family 16 [ 0.183441] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.000015] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949670400ns [ 0.000192] Console: colour dummy device 80x30 [ 0.000220] Calibrating delay loop... 319.48 BogoMIPS (lpj=1597440) [ 0.050058] pid_max: default: 32768 minimum: 301 [ 0.050229] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.050250] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.051118] Initializing cgroup subsys net_cls [ 0.051182] CPU: Testing write buffer coherency: ok [ 0.051589] Setting up static identity map for 0x60567fa0 - 0x60567fd8 [ 0.110474] CPU1: Booted secondary processor [ 0.170160] Brought up 2 CPUs [ 0.170186] SMP: Total of 2 processors activated. [ 0.171166] devtmpfs: initialized [ 0.175861] prandom: seed boundary self test passed [ 0.180072] prandom: 100 self tests passed [ 0.180098] pinctrl core: initialized pinctrl subsystem [ 0.182878] NET: Registered protocol family 16 [ 0.183441] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.187816] gpio-oxnas 44000000.gpio: at address c8846000 [ 0.188113] gpio-oxnas 44100000.gpio: at address c8848000 [ 0.188695] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.201090] vgaarb: loaded [ 0.201635] SCSI subsystem initialized [ 0.202516] usbcore: registered new interface driver usbfs [ 0.202621] usbcore: registered new interface driver hub [ 0.202828] usbcore: registered new device driver usb [ 0.202969] pps_core: LinuxPPS API ver. 1 registered [ 0.202982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.203031] PTP clock support registered [ 0.204554] cfg80211: Calling CRDA to update world regulatory domain [ 0.205071] Switched to clocksource rps_clocksource_timer [ 0.219850] NET: Registered protocol family 2 [ 0.221125] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.221171] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.221207] TCP: Hash tables configured (established 1024 bind 1024) [ 0.221301] TCP: reno registered [ 0.187816] gpio-oxnas 44000000.gpio: at address c8846000 [ 0.188113] gpio-oxnas 44100000.gpio: at address c8848000 [ 0.188695] pinctrl-oxnas pinctrl: initialized OX820 pinctrl driver [ 0.201090] vgaarb: loaded [ 0.201635] SCSI subsystem initialized [ 0.202516] usbcore: registered new interface driver usbfs [ 0.202621] usbcore: registered new interface driver hub [ 0.202828] usbcore: registered new device driver usb [ 0.202969] pps_core: LinuxPPS API ver. 1 registered [ 0.202982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.203031] PTP clock support registered [ 0.204554] cfg80211: Calling CRDA to update world regulatory domain [ 0.205071] Switched to clocksource rps_clocksource_timer [ 0.219850] NET: Registered protocol family 2 [ 0.221125] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.221171] TCP bind hash table entries: 1024 (order: 1, 8192 bytes) [ 0.221207] TCP: Hash tables configured (established 1024 bind 1024) [ 0.221301] TCP: reno registered [ 0.221332] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.221376] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.221708] NET: Registered protocol family 1 [ 0.222233] RPC: Registered named UNIX socket transport module. [ 0.222254] RPC: Registered udp transport module. [ 0.222266] RPC: Registered tcp transport module. [ 0.222279] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.223792] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.244234] NFS: Registering the id_resolver key type [ 0.244303] Key type id_resolver registered [ 0.244316] Key type id_legacy registered [ 0.244357] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.244380] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.245271] fuse init (API version 7.23) [ 0.246640] msgmni has been set to 237 [ 0.247152] Key type big_key registered [ 0.251302] alg: No test for stdrng (krng) [ 0.324999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.221332] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.221376] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.221708] NET: Registered protocol family 1 [ 0.222233] RPC: Registered named UNIX socket transport module. [ 0.222254] RPC: Registered udp transport module. [ 0.222266] RPC: Registered tcp transport module. [ 0.222279] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.223792] futex hash table entries: 512 (order: 2, 16384 bytes) [ 0.244234] NFS: Registering the id_resolver key type [ 0.244303] Key type id_resolver registered [ 0.244316] Key type id_legacy registered [ 0.244357] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.244380] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.245271] fuse init (API version 7.23) [ 0.246640] msgmni has been set to 237 [ 0.247152] Key type big_key registered [ 0.251302] alg: No test for stdrng (krng) [ 0.324999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.325032] io scheduler noop registered [ 0.325056] io scheduler deadline registered [ 0.325414] io scheduler cfq registered (default) [ 0.326046] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.327431] console [ttyS0] disabled [ 0.327526] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 0.817943] console [ttyS0] enabled [ 0.823393] scsi host0: sata_oxnas [ 0.827438] ata1: SATA max UDMA/133 irq 50 [ 0.831869] ox820sata: reseting SATA core [ 0.841712] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.848040] nand: Hynix H27U1G8F2BTR-BC [ 0.857507] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 0.863173] Scanning device for bad blocks [ 0.871784] Bad eraseblock 54 at 0x0000006c0000 [ 0.936890] Bad eraseblock 802 at 0x000006440000 [ 0.946414] Bad eraseblock 863 at 0x000006be0000 [ 0.964016] 2 ofpart partitions found on MTD device 41000000.nand [ 0.325032] io scheduler noop registered [ 0.325056] io scheduler deadline registered [ 0.325414] io scheduler cfq registered (default) [ 0.326046] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.327431] console [ttyS0] disabled [ 0.327526] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 0.817943] console [ttyS0] enabled [ 0.823393] scsi host0: sata_oxnas [ 0.827438] ata1: SATA max UDMA/133 irq 50 [ 0.831869] ox820sata: reseting SATA core [ 0.841712] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 0.848040] nand: Hynix H27U1G8F2BTR-BC [ 0.857507] nand: 128MiB, SLC, page size: 2048, OOB size: 64 [ 0.863173] Scanning device for bad blocks [ 0.871784] Bad eraseblock 54 at 0x0000006c0000 [ 0.936890] Bad eraseblock 802 at 0x000006440000 [ 0.946414] Bad eraseblock 863 at 0x000006be0000 [ 0.964016] 2 ofpart partitions found on MTD device 41000000.nand [ 0.970076] Creating 2 MTD partitions on "41000000.nand": [ 0.975467] 0x000000000000-0x000000e00000 : "boot" [ 0.981729] 0x000000e00000-0x000008000000 : "data" [ 0.988480] stmmaceth 40400000.ethernet: no reset control found [ 0.994414] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 0.999436] Ring mode enabled [ 1.002488] DMA HW capability register supported [ 1.006988] Enhanced/Alternate descriptors [ 1.011330] Enabled extended descriptors [ 1.015319] RX Checksum Offload Engine supported (type 2) [ 1.020784] TX Checksum insertion supported [ 1.025029] Wake-Up On Lan supported [ 1.028666] Enable RX Mitigation via HW Watchdog Timer [ 1.037378] libphy: stmmac: probed [ 1.040814] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 1.047139] eth0: PHY ID 001cc915 at 3 IRQ POLL (stmmac-0:03) [ 1.053030] PPP generic driver version 2.4.2 [ 1.057815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.970076] Creating 2 MTD partitions on "41000000.nand": [ 0.975467] 0x000000000000-0x000000e00000 : "boot" [ 0.981729] 0x000000e00000-0x000008000000 : "data" [ 0.988480] stmmaceth 40400000.ethernet: no reset control found [ 0.994414] stmmac - user ID: 0x12, Synopsys ID: 0x35 [ 0.999436] Ring mode enabled [ 1.002488] DMA HW capability register supported [ 1.006988] Enhanced/Alternate descriptors [ 1.011330] Enabled extended descriptors [ 1.015319] RX Checksum Offload Engine supported (type 2) [ 1.020784] TX Checksum insertion supported [ 1.025029] Wake-Up On Lan supported [ 1.028666] Enable RX Mitigation via HW Watchdog Timer [ 1.037378] libphy: stmmac: probed [ 1.040814] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 1.047139] eth0: PHY ID 001cc915 at 3 IRQ POLL (stmmac-0:03) [ 1.053030] PPP generic driver version 2.4.2 [ 1.057815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.064445] ehci-pci: EHCI PCI platform driver [ 1.069455] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.075051] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.082867] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100 [ 1.100577] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.106867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.113676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120896] usb usb1: Product: EHCI Host Controller [ 1.125752] usb usb1: Manufacturer: Linux 3.17.0-oxnas-tld-1 ehci_hcd [ 1.132190] usb usb1: SerialNumber: 40200100.ehci [ 1.137789] hub 1-0:1.0: USB hub found [ 1.141642] hub 1-0:1.0: 2 ports detected [ 1.146306] usbcore: registered new interface driver cdc_acm [ 1.151976] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.160056] usbcore: registered new interface driver cdc_wdm [ 1.165905] usbcore: registered new interface driver usb-storage [ 1.172162] usbcore: registered new interface driver usbserial [ 1.178042] usbcore: registered new interface driver usbserial_generic [ 1.064445] ehci-pci: EHCI PCI platform driver [ 1.069455] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 1.075051] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 1.082867] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100 [ 1.100577] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 1.106867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.113676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.120896] usb usb1: Product: EHCI Host Controller [ 1.125752] usb usb1: Manufacturer: Linux 3.17.0-oxnas-tld-1 ehci_hcd [ 1.132190] usb usb1: SerialNumber: 40200100.ehci [ 1.137789] hub 1-0:1.0: USB hub found [ 1.141642] hub 1-0:1.0: 2 ports detected [ 1.146306] usbcore: registered new interface driver cdc_acm [ 1.151976] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.160056] usbcore: registered new interface driver cdc_wdm [ 1.165905] usbcore: registered new interface driver usb-storage [ 1.172162] usbcore: registered new interface driver usbserial [ 1.178042] usbcore: registered new interface driver usbserial_generic [ 1.184655] usbserial: USB Serial support registered for generic [ 1.190993] mousedev: PS/2 mouse device common for all mice [ 1.196559] i2c /dev entries driver [ 1.201259] usbcore: registered new interface driver usbhid [ 1.206807] usbhid: USB HID core driver [ 1.211051] TCP: cubic registered [ 1.215557] NET: Registered protocol family 10 [ 1.221399] sit: IPv6 over IPv4 tunneling driver [ 1.227048] NET: Registered protocol family 17 [ 1.231810] Key type dns_resolver registered [ 1.238589] UBI: attaching mtd1 to ubi0 [ 1.360040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.370600] ata1.00: supports DRM functions and may not be fully accessible [ 1.377541] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR070, max UDMA/133 [ 1.384494] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.392038] ata1.00: supports DRM functions and may not be fully accessible [ 1.399516] ata1.00: configured for UDMA/133 [ 1.403064] UBI: scanning is finished [ 1.184655] usbserial: USB Serial support registered for generic [ 1.190993] mousedev: PS/2 mouse device common for all mice [ 1.196559] i2c /dev entries driver [ 1.201259] usbcore: registered new interface driver usbhid [ 1.206807] usbhid: USB HID core driver [ 1.211051] TCP: cubic registered [ 1.215557] NET: Registered protocol family 10 [ 1.221399] sit: IPv6 over IPv4 tunneling driver [ 1.227048] NET: Registered protocol family 17 [ 1.231810] Key type dns_resolver registered [ 1.238589] UBI: attaching mtd1 to ubi0 [ 1.360040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.370600] ata1.00: supports DRM functions and may not be fully accessible [ 1.377541] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR070, max UDMA/133 [ 1.384494] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.392038] ata1.00: supports DRM functions and may not be fully accessible [ 1.399516] ata1.00: configured for UDMA/133 [ 1.403064] UBI: scanning is finished [ 1.407964] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R070 PQ: 0 ANSI: 5 [ 1.422597] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB) [ 1.430563] UBI: attached mtd1 (name "data", size 114 MiB) to ubi0 [ 1.436730] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 1.444080] sd 0:0:0:0: [sda] Write Protect is off [ 1.449064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.450585] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 1.450593] UBI: VID header offset: 512 (aligned 512), data offset: 2048 [ 1.450598] UBI: good PEBs: 910, bad PEBs: 2, corrupted PEBs: 0 [ 1.450603] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 1.450613] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1170219428 [ 1.450618] UBI: available PEBs: 0, total reserved PEBs: 910, PEBs reserved for bad PEB handling: 18 [ 1.450639] UBI: background thread "ubi_bgt0d" started, PID 50 [ 1.510448] sda: sda1 sda2 sda3 [ 1.516152] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.525626] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 1.532736] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 1.542187] devtmpfs: mounted [ 1.407964] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R070 PQ: 0 ANSI: 5 [ 1.422597] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB) [ 1.430563] UBI: attached mtd1 (name "data", size 114 MiB) to ubi0 [ 1.436730] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes [ 1.444080] sd 0:0:0:0: [sda] Write Protect is off [ 1.449064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.450585] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512 [ 1.450593] UBI: VID header offset: 512 (aligned 512), data offset: 2048 [ 1.450598] UBI: good PEBs: 910, bad PEBs: 2, corrupted PEBs: 0 [ 1.450603] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 1.450613] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1170219428 [ 1.450618] UBI: available PEBs: 0, total reserved PEBs: 910, PEBs reserved for bad PEB handling: 18 [ 1.450639] UBI: background thread "ubi_bgt0d" started, PID 50 [ 1.510448] sda: sda1 sda2 sda3 [ 1.516152] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.525626] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 1.532736] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 1.542187] devtmpfs: mounted [ 1.545492] Freeing unused kernel memory: 172K (c073a000 - c0765000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.537799] udevd[168]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [ 4.448017] EXT4-fs (sda2): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.20.1 rootfs: clean, 12139/262144 files, 246654/1048576 blocks done. [ 4.682385] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ok ] Cleaning up temporary files... /tmp /lib/init/rw. [ ok ] Loading kernel modules...done. [....] Activating lvm and md swap...[ 9.231667] Adding 524284k swap on /swapfile1. Priority:-1 extents:7 across:868348k SS done. [....] Checking file systems...fsck from util-linux 2.20.1 home: clean, 11/16531456 files, 1052633/66101418 blocks [ 1.545492] Freeing unused kernel memory: 172K (c073a000 - c0765000) INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.537799] udevd[168]: starting version 175 . ok [ ok ] Synthesizing the initial hotplug events...done. [ ok ] Waiting for /dev to be fully populated...done. [ 4.448017] EXT4-fs (sda2): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.20.1 rootfs: clean, 12139/262144 files, 246654/1048576 blocks done. [ 4.682385] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ ok ] Cleaning up temporary files... /tmp /lib/init/rw. [ ok ] Loading kernel modules...done. [....] Activating lvm and md swap...[ 9.231667] Adding 524284k swap on /swapfile1. Priority:-1 extents:7 across:868348k SS done. [....] Checking file systems...fsck from util-linux 2.20.1 home: clean, 11/16531456 files, 1052633/66101418 blocks done. [....] Mounting local filesystems...[ 9.852400] random: nonblocking pool is initialized done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:6a:1d:17 Sending on LPF/eth0/74:f0:6d:6a:1d:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 14.920729] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 done. [....] Mounting local filesystems...[ 9.852400] random: nonblocking pool is initialized done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:6a:1d:17 Sending on LPF/eth0/74:f0:6d:6a:1d:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 14.920729] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.209 -- renewal in 348851 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting NTP server: ntpd. [ ok ] Starting rpcbind daemon...[....] Already running.. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1701 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... done. [....] Mounting local filesystems...[ 9.852400] random: nonblocking pool is initialized done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:6a:1d:17 Sending on LPF/eth0/74:f0:6d:6a:1d:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 14.920729] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.209 -- renewal in 348851 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting NTP server: ntpd. [ ok ] Starting rpcbind daemon...[....] Already running.. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1701 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd... done. [....] Mounting local filesystems...[ 9.852400] random: nonblocking pool is initialized done. [ ok ] Activating swapfile swap...done. [ ok ] Cleaning up temporary files.... [ ok ] Setting kernel variables ...done. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/74:f0:6d:6a:1d:17 Sending on LPF/eth0/74:f0:6d:6a:1d:17 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 [ 14.920729] stmmaceth 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.209 -- renewal in 348851 seconds. done. [ ok ] Starting rpcbind daemon.... [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Cleaning up temporary files.... INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [ ok ] Starting NTP server: ntpd. [ ok ] Starting rpcbind daemon...[....] Already running.. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 1701 (syslogd) . ok [ ok ] Starting system message bus: dbus. [ ok ] Starting NFS common utilities: statd idmapd. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. [ ok ] Starting OpenBSD Secure Shell server: sshd. [warn] Not starting NFS kernel daemon: no exports. ... (warning). [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd.. 1706 (klogd) . ok Debian GNU/Linux 7 debian ttyS0 debian login:
Re: revive Medion oxnas stg-212 April 22, 2023 02:40PM |
Admin Registered: 13 years ago Posts: 19,102 |
## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4609863 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2b506 ... OK
Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212
> [ 9.362283] Kernel panic - not syncing: VFS: > Unable to mount root fs on unknown-block(0,0)
cd /media/sdb1/boot cp -a uImage uImage.stg_212 cp -a uImage.orig uImage sync
Re: revive Medion oxnas stg-212 April 22, 2023 03:25PM |
Registered: 6 years ago Posts: 103 |
## Flattened Device Tree blob at 61000000with
OX820 # printenv SET_dtb=fdt addr ${fdtaddr} ; fdt header autoload=no baudrate=115200 bootcmd=run ideboot bootdelay=3 bootnew=bootm 60000000 - 61000000 bootold=bootm 60000000 console=console=ttyS0,115200n8 ethact=mii0 ethaddr=06:05:C2:E8:D1:88 ext2_dtb=ext2load ide 0:2 61000000 /boot/dts/ox820-stg212.dtb ext2_ideboot=run ext2_uimage ; run ext2_dtb ; run SET_dtb ; run bootnew ext2_uimage=ext2load ide 0:2 60000000 /boot/uImage ext4_dtb=ext4load ide 0:2 61000000 /boot/dts/ox820-stg212.dtb ext4_ideboot=run ext4_uimage ; run ext4_dtb ; run SET_dtb ; run bootnew ext4_uimage=ext4load ide 0:2 60000000 /boot/uImage fdtaddr=61000000 filesize=1b79 ideboot=run ext2_ideboot idebootold=${loadold} ;${bootold} imgaddr=60000000 ipaddr=192.168.0.10 keypressed=1 mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand:14m(boot),-(data) netcon=echo switch to net console;setenv stderr nc;setenv stdin nc;setenv stdout nc;echo switch to net console preboot=run safeboot serialcon=echo switch to serial console;setenv stderr serial;setenv stdin serial;setenv stdout serial;echo switch to serial console stderr=serial stdin=serial stdout=serial updboot=bootp;tftp 60000000 u-boot.img;ide write 60000000 400 400and just decompressed Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 to rootfs, without depending DTB to uImage!?
## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4600384 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2b506 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212
[ 9.372572] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 9.380800] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1 [ 9.387898] Hardware name: Generic DT based system [ 9.392693] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14) [ 9.400417] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0) [ 9.407623] [<c07384cc>] (dump_stack) from [<c0111b88>] (panic+0xec/0x268) [ 9.414484] [<c0111b88>] (panic) from [<c0a012bc>] (mount_block_root+0x1e0/0x2a8) [ 9.421941] [<c0a012bc>] (mount_block_root) from [<c0a0146c>] (mount_root+0xe8/0x128) [ 9.429744] [<c0a0146c>] (mount_root) from [<c0a015dc>] (prepare_namespace+0x130/0x194) [ 9.437716] [<c0a015dc>] (prepare_namespace) from [<c0a00e5c>] (kernel_init_freeable+0x17c/0x1c4) [ 9.446556] [<c0a00e5c>] (kernel_init_freeable) from [<c074b198>] (kernel_init+0x8/0x110) [ 9.454702] [<c074b198>] (kernel_init) from [<c01029b8>] (ret_from_fork+0x14/0x3c) [ 9.462259] CPU0: stopping [ 9.464965] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.180-oxnas-tld-1 #1 [ 9.472061] Hardware name: Generic DT based system [ 9.476848] [<c01095b0>] (unwind_backtrace) from [<c01053bc>] (show_stack+0x10/0x14) [ 9.484564] [<c01053bc>] (show_stack) from [<c07384cc>] (dump_stack+0xb4/0xd0) [ 9.491763] [<c07384cc>] (dump_stack) from [<c01082a8>] (handle_IPI+0x190/0x1dc) [ 9.499128] [<c01082a8>] (handle_IPI) from [<c01014c8>] (gic_handle_irq+0x7c/0x8c) [ 9.506667] [<c01014c8>] (gic_handle_irq) from [<c0106278>] (__irq_svc+0x58/0x8c) [ 9.514109] Exception stack(0xc0b01f28 to 0xc0b01f70) [ 9.519139] 1f20: 00000001 00000000 00000000 00000000 00000000 ffffe000 [ 9.527280] 1f40: c0b03ae4 c0b03a88 00000000 00000000 c0a39e68 c08f607c 00000000 c0b01f78 [ 9.535418] 1f60: c0103278 c010327c 60000013 ffffffff [ 9.540454] [<c0106278>] (__irq_svc) from [<c010327c>] (arch_cpu_idle+0x28/0x30) [ 9.547827] [<c010327c>] (arch_cpu_idle) from [<c0149f5c>] (do_idle+0x180/0x1d4) [ 9.555194] [<c0149f5c>] (do_idle) from [<c014a270>] (cpu_startup_entry+0x18/0x1c) [ 9.562739] [<c014a270>] (cpu_startup_entry) from [<c0a00c50>] (start_kernel+0x368/0x3f8) [ 9.570882] [<c0a00c50>] (start_kernel) from [<60008074>] (0x60008074) [ 9.577390] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Re: revive Medion oxnas stg-212 April 22, 2023 03:59PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
here is, what i didn't expect. booting from sata with "schnee's rescue disk". 3 partitions "BOOT" (vfat), "rootfs" (ext2), "home" (ext2) and stock u-boot. deleted all files on "rootfs" after successful first boot (Debian 3.17.0) which then crashed after automatic upgrade to kernel 4.1.0!
extracted Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 to empty "rootfs" and created uImage with embedded DTB for oxnas820-stg212.
U-Boot 2013.10-ga72eb8f-dirty (Feb 19 2014 - 15:21:12) for OXNAS
DRAM: 128 MiB
IDE: Bus 0: OK
Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8
Type: Hard Disk
Supports 48-bit addressing
Capacity: 262321.6 MB = 256.1 GB (537234768 x 512)
NAND: 128 MiB
reading u-boot.env
In: serial
Out: serial
Err: serial
Net: mii0
## Error: "safeboot" not defined
Hit any key to stop autoboot: 0
4609927 bytes read in 613 ms (7.2 MiB/s)
9479 bytes read in 7 ms (1.3 MiB/s)
magic: 0xd00dfeed
totalsize: 0x2507 (9479)
off_dt_struct: 0x38
off_dt_strings: 0x217c
off_mem_rsvmap: 0x28
version: 17
last_comp_version: 16
boot_cpuid_phys: 0x0
size_dt_strings: 0x38b
size_dt_struct: 0x2144
number mem_rsv: 0x0
## Booting kernel from Legacy Image at 60000000 ...
Image Name: Linux-4.14.180-oxnas-tld-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4609863 Bytes = 4.4 MiB
Load Address: 60008000
Entry Point: 60008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 61000000
Booting using the fdt blob at 0x61000000
Loading Kernel Image ... OK
Loading Device Tree to 67e26000, end 67e2b506 ... OK
Starting kernel ...
Re: revive Medion oxnas stg-212 April 22, 2023 04:08PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 April 22, 2023 04:11PM |
Registered: 6 years ago Posts: 103 |
OX820 # ext2load ide 0:2 60000000 /boot/uImage 4600448 bytes read in 611 ms (7.2 MiB/s) OX820 # bootm 60000000 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4600384 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK Loading Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Error: unrecognized/unsupported machine ID (r1 = 0x00000480). Available machine support: ID (hex) NAME ffffffff Generic DT based system Please check your kernel config and/or bootloader.or
OX820 # ext2load ide 0:2 60000000 /boot/uImage 4600448 bytes read in 611 ms (7.2 MiB/s) OX820 # ext2load ide 0:2 61000000 /boot/dts/ox820-stg212.dtb 9479 bytes read in 7 ms (1.3 MiB/s) OX820 # bootm 60000000 - 61000000 ## Booting kernel from Legacy Image at 60000000 ... Image Name: Linux-4.14.180-oxnas-tld-1 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4600384 Bytes = 4.4 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 61000000 Booting using the fdt blob at 0x61000000 Loading Kernel Image ... OK Loading Device Tree to 67e26000, end 67e2b506 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.180-oxnas-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP PREEMPT Wed May 13 02:38:34 PDT 2020 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212leads to same kernel panic (unable to mount rootfs).
Re: revive Medion oxnas stg-212 April 22, 2023 04:47PM |
Admin Registered: 13 years ago Posts: 19,102 |
bootm $uimage_address bootm $uimage_address $uinitrd_address
bootm $uimage_address $uinitrd_address $dtb_address bootm $uimage_address - $dtb_address
printenvIf the kernel kernel stops booting at that "Kernel panic - not syncing: VFS: Unable to mount root", then recheck your uImage and the u-boot envs being used for booting. Checking uImage is easy just list the /boot folder and see which version is being used.
ls -lart /boot
Re: revive Medion oxnas stg-212 April 22, 2023 06:09PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 April 25, 2023 03:02AM |
Registered: 6 years ago Posts: 103 |
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0Environment from "uboot.2015.10-tld-2.ox820.bodhi.tar" fitted to match ox820-stg212.dtb on SSD with just 1 partition ext3 "rootfs". ext4 isn't working! ext4ls lists folder structure but fails to list their contents, uImage, uInitrd and dtb can't be read - booting fails of course.
OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=3 bootdev=usb device=0:1 devices=usb ide disks=0 1 2 3 dtb_file=/boot/dts/ox820-stg212.dtb ethact=dwmac.40400000 ethaddr=06:05:C2:E8:D1:88 if_netconsole=ping $serverip ipaddr=192.168.0.10 load_dtb=echo loading DTB $dtb_file ...; load $bootdev $device 0x62c00000 $dtb_file load_initrd=echo loading uInitrd ...; load $bootdev $device 0x60e00000 /boot/uInitrd load_uimage=echo loading uImage ...; load $bootdev $device 0x60500000 /boot/uImage mainlineLinux=yes mtdids=nand0=41000000.nand mtdparts=mtdparts=41000000.nand-controller:14m(boot),-(data) preboot_nc=setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi scan_disk=echo running scan_disk ...; scan_done=0; setenv scan_usb "usb start"; setenv scan_ide "ide reset"; setenv scan_mmc "mmc rescan"; for dev in $devices; do if test $scan_done -eq 0; then echo Scan device $dev; run scan_$dev; for disknum in $disks; do if test $scan_done -eq 0; then echo device $dev $disknum:1; if load $dev $disknum:1 0x60500000 /boot/uImage 1; then scan_done=1; echo Found bootable drive on $dev $disknum; setenv device $disknum:1; setenv bootdev $dev; fi; fi; done; fi; done serverip=192.168.0.220 set_bootargs=setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts $custom_params start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version; stderr=serial stdin=serial stdout=serial uenv_import=echo importing envs ...; env import -t 0x60510000 $filesize uenv_init_devices=setenv init_usb "usb start"; setenv init_ide "ide reset"; setenv init_mmc "mmc rescan"; for devtype in $devices; do run init_$devtype; done; uenv_load=run uenv_init_devices; setenv uenv_loaded 0; for devtype in $devices; do for disknum in 0; do run uenv_read_disk; done; done; uenv_read=echo loading envs from $devtype $disknum ...; if load $devtype $disknum:1 0x60500000 /boot/uEnv.txt; then setenv uenv_loaded 1; fi uenv_read_disk=if test $devtype -eq mmc; then if $devtype part; then run uenv_read; fi; else if $devtype part $disknum; then run uenv_read; fi; fi usb_custom_params=zswap.enabled=1 usb_ready_retry=15 Environment size: 2723/131068 bytesBooting "Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2" incl. "linux-5.4.224-oxnas-tld-1.bodhi.tar.bz2" with swapfile, updated to Debian 11 bullseye from SSD on IDE 0:1 ext3 "rootfs"
U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Reset IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512) no USB devices available Partition Map for IDE device 0 -- Partition Type: DOS Part Start Sector Num Sectors UUID Type 1 2048 537232720 81436d1c-01 83 loading envs from ide 0 ... ** File not found /boot/uEnv.txt ** running scan_disk ... Scan device usb device usb 0:1 ** Bad device usb 0 ** device usb 1:1 ** Bad device usb 1 ** device usb 2:1 ** Bad device usb 2 ** device usb 3:1 ** Bad device usb 3 ** Scan device ide Reset IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512) device ide 0:1 1 bytes read in 7 ms (0 Bytes/s) Found bootable drive on ide 0 loading uImage ... 5589656 bytes read in 716 ms (7.4 MiB/s) loading uInitrd ... 6437498 bytes read in 827 ms (7.4 MiB/s) loading DTB /boot/dts/ox820-stg212.dtb ... 9339 bytes read in 8 ms (1.1 MiB/s) ## Booting kernel from Legacy Image at 60500000 ... Image Name: Linux-5.4.224-oxnas-tld-1 Created: 2023-04-24 15:23:34 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5589592 Bytes = 5.3 MiB Load Address: 60008000 Entry Point: 60008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 60e00000 ... Image Name: initramfs-5.4.224-oxnas-tld-1 Created: 2023-04-24 16:00:40 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6437434 Bytes = 6.1 MiB Load Address: 60000000 Entry Point: 60000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 62c00000 Booting using the fdt blob at 0x62c00000 Loading Kernel Image ... OK Loading Ramdisk to 67803000, end 67e26a3a ... OK Loading Device Tree to 677fd000, end 6780247a ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000][ T0] Booting Linux on physical CPU 0x0 [ 0.000000][ T0] Linux version 5.4.224-oxnas-tld-1 (root@tldDebian) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1.0 SMP PREEMPT Mon Nov 14 15:48:26 PST 2022 [ 0.000000][ T0] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000][ T0] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000][ T0] OF: fdt: Machine model: MitraStar Technology Corp. STG-212 [ 0.000000][ T0] Memory policy: Data cache writealloc [ 0.000000][ T0] percpu: Embedded 15 pages/cpu s30636 r8192 d22612 u61440 [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand-controller:14m(boot),-(data) [ 0.000000][ T0] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000][ T0] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000][ T0] Memory: 110672K/131072K available (8192K kernel code, 234K rwdata, 2068K rodata, 1024K init, 258K bss, 20400K reserved, 0K cma-reserved) [ 0.000000][ T0] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation. [ 0.000000][ T0] Tasks RCU enabled. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000][ T0] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 32 irqs, parent IRQ: 16 [ 0.000017][ T0] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000048][ T0] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000064][ T0] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.000092][ T0] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.000248][ T0] GIC: PPI13 is secure or misconfigured [ 0.000304][ T0] GIC: PPI13 is secure or misconfigured [ 0.000634][ T0] Console: colour dummy device 80x30 [ 0.000706][ T0] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050393][ T0] pid_max: default: 32768 minimum: 301 [ 0.051100][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051128][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051394][ T0] *** VALIDATE tmpfs *** [ 0.052748][ T0] *** VALIDATE proc *** [ 0.052958][ T0] *** VALIDATE cgroup1 *** [ 0.052984][ T0] *** VALIDATE cgroup2 *** [ 0.053184][ T0] CPU: Testing write buffer coherency: ok [ 0.055680][ T1] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.056010][ T1] rcu: Hierarchical SRCU implementation. [ 0.057024][ T1] smp: Bringing up secondary CPUs ... [ 0.058273][ T0] GIC: PPI13 is secure or misconfigured [ 0.110661][ T1] smp: Brought up 1 node, 2 CPUs [ 0.110699][ T1] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.111866][ T1] devtmpfs: initialized [ 0.118525][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.118579][ T1] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.118725][ T1] prandom: seed boundary self test passed [ 0.123025][ T1] prandom: 100 self tests passed [ 0.123046][ T1] pinctrl core: initialized pinctrl subsystem [ 0.125258][ T1] NET: Registered protocol family 16 [ 0.127093][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.130135][ T1] cpuidle: using governor ladder [ 0.130211][ T1] cpuidle: using governor menu [ 6.081943][ T1] vgaarb: loaded [ 6.082890][ T1] SCSI subsystem initialized [ 6.083724][ T1] usbcore: registered new interface driver usbfs [ 6.083824][ T1] usbcore: registered new interface driver hub [ 6.083906][ T1] usbcore: registered new device driver usb [ 6.084147][ T1] pps_core: LinuxPPS API ver. 1 registered [ 6.084162][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 6.084195][ T1] PTP clock support registered [ 6.086010][ T1] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 6.086069][ T1] *** VALIDATE bpf *** [ 6.086599][ T1] *** VALIDATE ramfs *** [ 6.106621][ T1] NET: Registered protocol family 2 [ 6.106880][ T1] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 6.107886][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 6.108188][ T1] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 6.108234][ T1] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 6.108270][ T1] TCP: Hash tables configured (established 1024 bind 1024) [ 6.108503][ T1] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108556][ T1] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108864][ T1] NET: Registered protocol family 1 [ 6.110182][ T1] RPC: Registered named UNIX socket transport module. [ 6.110210][ T1] RPC: Registered udp transport module. [ 6.110223][ T1] RPC: Registered tcp transport module. [ 6.110236][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.110259][ T1] PCI: CLS 0 bytes, default 32 [ 6.110714][ T1] Unpacking initramfs... [ 6.844464][ T1] Freeing initrd memory: 6288K [ 6.845824][ T1] Initialise system trusted keyrings [ 6.846195][ T1] Key type blacklist registered [ 6.846612][ T1] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 6.860024][ T1] zbud: loaded [ 6.866104][ T1] NFS: Registering the id_resolver key type [ 6.866181][ T1] Key type id_resolver registered [ 6.866199][ T1] Key type id_legacy registered [ 6.866232][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.866250][ T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.866265][ T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.867729][ T1] fuse: init (API version 7.31) [ 6.868001][ T1] *** VALIDATE fuse *** [ 6.868029][ T1] *** VALIDATE fuse *** [ 6.868948][ T1] orangefs_debugfs_init: called with debug mask: :none: :0: [ 6.869268][ T1] orangefs_init: module version upstream loaded [ 6.917921][ T1] Key type asymmetric registered [ 6.917957][ T1] Asymmetric key parser 'x509' registered [ 6.918051][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 6.925386][ T1] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 6.926983][ T1] printk: console [ttyS0] disabled [ 6.927162][ T1] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 7.566814][ T1] printk: console [ttyS0] enabled [ 7.587381][ T1] loop: module loaded [ 7.593610][ T1] scsi host0: sata_oxnas [ 7.598535][ T1] ata1: SATA max UDMA/133 irq 57 [ 7.603440][ T75] sata_oxnas: resetting SATA core [ 7.666242][ T1] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.673267][ T1] nand: Hynix H27U1G8F2BTR-BC [ 7.677849][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.686192][ T1] Scanning device for bad blocks [ 7.695311][ T1] Bad eraseblock 54 at 0x0000006c0000 [ 7.760005][ T1] Bad eraseblock 802 at 0x000006440000 [ 7.770140][ T1] Bad eraseblock 863 at 0x000006be0000 [ 7.788249][ T1] 2 cmdlinepart partitions found on MTD device 41000000.nand-controller [ 7.796421][ T1] Creating 2 MTD partitions on "41000000.nand-controller": [ 7.803445][ T1] 0x000000000000-0x000000e00000 : "boot" [ 7.809909][ T1] 0x000000e00000-0x000008000000 : "data" [ 7.817505][ T1] oxnas-dwmac 40400000.ethernet: IRQ eth_lpi not found [ 7.824322][ T1] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 7.830904][ T1] oxnas-dwmac 40400000.ethernet: no reset control found [ 7.906401][ T1] oxnas-dwmac 40400000.ethernet: User ID: 0x12, Synopsys ID: 0x35 [ 7.914042][ T1] oxnas-dwmac 40400000.ethernet: DWMAC1000 [ 7.919823][ T1] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 7.927820][ T1] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 7.935792][ T1] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 7.941537][ T1] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 7.949107][ T1] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 7.956072][ T1] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 7.963535][ T1] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 7.970841][ T1] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 7.977200][ T1] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 7.985725][ T1] oxnas-dwmac 40400000.ethernet: device MAC address ae:14:bb:64:9a:ea [ 8.038801][ T1] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 8.049021][ T1] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 8.060244][ T1] PPP generic driver version 2.4.2 [ 8.065523][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.072803][ T1] ehci-pci: EHCI PCI platform driver [ 8.126064][ T75] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8.133222][ T75] ata1.00: supports DRM functions and may not be fully accessible [ 8.140922][ T75] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR070, max UDMA/133 [ 8.148590][ T75] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 8.158315][ T75] ata1.00: supports DRM functions and may not be fully accessible [ 8.286069][ T1] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 8.292272][ T1] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 8.300904][ T1] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 8.336061][ T1] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 8.343078][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.352071][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.359992][ T1] usb usb1: Product: EHCI Host Controller [ 8.365542][ T1] usb usb1: Manufacturer: Linux 5.4.224-oxnas-tld-1 ehci_hcd [ 8.372761][ T1] usb usb1: SerialNumber: 40200100.ehci [ 8.379136][ T1] hub 1-0:1.0: USB hub found [ 8.383641][ T1] hub 1-0:1.0: 2 ports detected [ 8.389742][ T1] usbcore: registered new interface driver cdc_wdm [ 8.396262][ T1] usbcore: registered new interface driver usb-storage [ 8.403238][ T1] usbcore: registered new interface driver usbserial_generic [ 8.410595][ T1] usbserial: USB Serial support registered for generic [ 8.417996][ T1] mousedev: PS/2 mouse device common for all mice [ 8.424371][ T1] i2c /dev entries driver [ 8.430254][ T1] hidraw: raw HID events driver (C) Jiri Kosina [ 8.436615][ T1] usbcore: registered new interface driver usbhid [ 8.442856][ T1] usbhid: USB HID core driver [ 8.449221][ T1] NET: Registered protocol family 10 [ 8.456291][ T1] Segment Routing with IPv6 [ 8.460736][ T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.469685][ T1] NET: Registered protocol family 17 [ 8.475304][ T1] Key type dns_resolver registered [ 8.481016][ T1] registered taskstats version 1 [ 8.485795][ T1] Loading compiled-in X.509 certificates [ 8.491586][ T1] zswap: loaded using pool lzo/zbud [ 8.497310][ T1] Key type ._fscrypt registered [ 8.502003][ T1] Key type .fscrypt registered [ 8.596582][ T1] Key type big_key registered [ 8.640622][ T1] Key type encrypted registered [ 8.649843][ T1] hctosys: unable to open rtc device (rtc0) [ 23.516088][ T75] ata1.00: qc timeout (cmd 0x47) [ 23.520865][ T75] sata_oxnas: resetting SATA core [ 23.867942][ T75] ata1.00: READ LOG DMA EXT failed, trying PIO [ 23.873932][ T75] ata1.00: ATA Identify Device Log not supported [ 23.880148][ T75] ata1.00: Security Log not supported [ 23.885376][ T75] ata1.00: configured for UDMA/133 [ 23.890375][ T75] sata_oxnas: resetting SATA core [ 25.616061][ T75] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.623203][ T75] ata1.00: supports DRM functions and may not be fully accessible [ 25.633231][ T75] ata1.00: supports DRM functions and may not be fully accessible [ 25.642933][ T75] ata1.00: configured for UDMA/133 [ 25.648586][ T7] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R070 PQ: 0 ANSI: 5 [ 25.658670][ T54] ata1.00: Enabling discard_zeroes_data [ 25.665049][ T54] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB) [ 25.673433][ T54] sd 0:0:0:0: [sda] Write Protect is off [ 25.679214][ T54] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.690152][ T54] ata1.00: Enabling discard_zeroes_data [ 25.697382][ T54] sda: sda1 [ 25.702072][ T54] ata1.00: Enabling discard_zeroes_data [ 25.708807][ T54] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.715668][ T1] Freeing unused kernel memory: 1024K [ 25.737297][ T1] Checked W+X mappings: passed, no W+X pages found [ 25.743633][ T1] Run /init as init process Loading, please wait... Starting version 247.3-7+deb11u1 [ 26.488522][ T118] gpio-41 (i2c-gpio): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 26.488878][ T121] input: keys as /devices/platform/keys/input/input0 [ 26.531870][ T118] gpio-42 (i2c-gpio): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 26.585052][ T118] i2c-gpio i2c-gpio: using lines 41 (SDA) and 42 (SCL) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Begin: Will now check root file system ... fsck from util-linux 2.36.1 [/sbin/fsck.ext3 (1) -- /dev/sda1] fsck.ext3 -a -C0 /dev/sda1 rootfs: clean, 19000/16793600 files, 1871362/67154090 blocks done. [ 37.364904][ T147] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 37.513815][ T147] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.96 booting Using makefile-style concurrent boot in runlevel S. Starting hotplug events dispatcher: systemd-udevd. Synthesizing the initial hotplug events (subsystems)...done. Synthesizing the initial hotplug events (devices)...done. Waiting for /dev to be fully populated...done. [ 41.401538][ T440] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro Checking file systems...done. Loading kernel modules...done. Cleaning up temporary files... /tmp. [ 44.166062][ T708] Adding 524284k swap on /swapfile. Priority:-2 extents:11 across:195181948k SSFS Mounting local filesystems...done. Activating swapfile swap, if any...done. Cleaning up temporary files.... [ 44.722352][ T795] random: dd: uninitialized urandom read (32 bytes read) Starting Setting kernel variables: sysctl. [ 45.179911][ T836] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] [ 45.193405][ T836] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 45.201533][ T836] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 45.210949][ T836] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 45.218071][ T836] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode Configuring network interfaces...Internet Systems Consortium DHCP Client 4.4.1 Copyright 2004-2018 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/5a:ea:2e:cb:64:fd Sending on LPF/eth0/5a:ea:2e:cb:64:fd Sending on Socket/fallback DHCPREQUEST for 192.168.0.214 on eth0 to 255.255.255.255 port 67 [ 48.316733][ T838] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 48.325685][ T838] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 51.200983][ T851] random: mktemp: uninitialized urandom read (6 bytes read) [ 51.283192][ T859] random: mktemp: uninitialized urandom read (6 bytes read) DHCPREQUEST for 192.168.0.214 on eth0 to 255.255.255.255 port 67 DHCPACK of 192.168.0.214 from 192.168.0.1 invoke-rc.d: could not determine current runlevel bound to 192.168.0.214 -- renewal in 335997 seconds. done. Starting RPC port mapper daemon: rpcbind. Starting NFS common utilities: statd idmapd. Cleaning up temporary files.... INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd... 992 (syslogd) . Starting NFS common utilities: statd idmapd. [ 53.431905][ T1048] random: dbus-daemon: uninitialized urandom read (12 bytes read) Not starting NFS kernel daemon: no exports. ... (warning). [ 53.516718][ T1048] random: dbus-daemon: uninitialized urandom read (12 bytes read) Starting system message bus: dbus. Starting NTP server: ntpd. [ 53.938526][ T1083] random: avahi-daemon: uninitialized urandom read (4 bytes read) Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Starting busybox' klogd implementation : klogdStarting /sbin/klogd... 1028 (klogd) . [ 57.906334][ C1] random: crng init done [ 57.910425][ C1] random: 1 urandom warning(s) missed due to ratelimiting Starting OpenBSD Secure Shell server: sshd. Debian GNU/Linux 11 debian ttyS0 debian login:
root@debian:~# cat /proc/cpuinfo processor : 0 model name : ARMv6-compatible processor rev 5 (v6l) BogoMIPS : 339.14 Features : half thumb fastmult edsp java tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xb02 CPU revision : 5 processor : 1 model name : ARMv6-compatible processor rev 5 (v6l) BogoMIPS : 339.14 Features : half thumb fastmult edsp java tls CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xb02 CPU revision : 5 Hardware : Generic DT based system Revision : 0000 Serial : 0000000000000000
root@debian:~# cat /proc/mtd dev: size erasesize name mtd0: 00e00000 00020000 "boot" mtd1: 07200000 00020000 "data"
root@debian:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.4.224-oxnas-tld-1 (root@tldDebian) (gcc version 10.2.1 20210110 (Debian 10.2.1-6)) #1.0 SMP PREEMPT Mon Nov 14 15:48:26 PST 2022 [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5787d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: MitraStar Technology Corp. STG-212 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 256 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 15 pages/cpu s30636 r8192 d22612 u61440 [ 0.000000] pcpu-alloc: s30636 r8192 d22612 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512 [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 mtdparts=41000000.nand-controller:14m(boot),-(data) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 110672K/131072K available (8192K kernel code, 234K rwdata, 2068K rodata, 1024K init, 258K bss, 20400K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 32 irqs, parent IRQ: 16 [ 0.000017] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 21474835200ns [ 0.000048] clocksource: oxnas_rps_clocksource_timer: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 19112603332 ns [ 0.000064] timer_oxnas_rps: Registered clocksource rate 390625Hz [ 0.000092] timer_oxnas_rps: Registered clock event rate 6250000Hz prescaler 0 period 62500 [ 0.000248] GIC: PPI13 is secure or misconfigured [ 0.000304] GIC: PPI13 is secure or misconfigured [ 0.000634] Console: colour dummy device 80x30 [ 0.000706] Calibrating delay loop... 339.14 BogoMIPS (lpj=1695744) [ 0.050393] pid_max: default: 32768 minimum: 301 [ 0.051100] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051128] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.051394] *** VALIDATE tmpfs *** [ 0.052748] *** VALIDATE proc *** [ 0.052958] *** VALIDATE cgroup1 *** [ 0.052984] *** VALIDATE cgroup2 *** [ 0.053184] CPU: Testing write buffer coherency: ok [ 0.055680] Setting up static identity map for 0x60100000 - 0x60100038 [ 0.056010] rcu: Hierarchical SRCU implementation. [ 0.057024] smp: Bringing up secondary CPUs ... [ 0.058273] GIC: PPI13 is secure or misconfigured [ 0.110661] smp: Brought up 1 node, 2 CPUs [ 0.110699] SMP: Total of 2 processors activated (678.29 BogoMIPS). [ 0.111866] devtmpfs: initialized [ 0.118525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.118579] futex hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.118725] prandom: seed boundary self test passed [ 0.123025] prandom: 100 self tests passed [ 0.123046] pinctrl core: initialized pinctrl subsystem [ 0.125258] NET: Registered protocol family 16 [ 0.127093] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.130135] cpuidle: using governor ladder [ 0.130211] cpuidle: using governor menu [ 6.081943] vgaarb: loaded [ 6.082890] SCSI subsystem initialized [ 6.083315] libata version 3.00 loaded. [ 6.083724] usbcore: registered new interface driver usbfs [ 6.083824] usbcore: registered new interface driver hub [ 6.083906] usbcore: registered new device driver usb [ 6.084147] pps_core: LinuxPPS API ver. 1 registered [ 6.084162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 6.084195] PTP clock support registered [ 6.086010] clocksource: Switched to clocksource oxnas_rps_clocksource_timer [ 6.086069] *** VALIDATE bpf *** [ 6.086599] *** VALIDATE ramfs *** [ 6.106621] NET: Registered protocol family 2 [ 6.106880] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 6.107886] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 6.108188] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 6.108234] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 6.108270] TCP: Hash tables configured (established 1024 bind 1024) [ 6.108503] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108556] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 6.108864] NET: Registered protocol family 1 [ 6.110182] RPC: Registered named UNIX socket transport module. [ 6.110210] RPC: Registered udp transport module. [ 6.110223] RPC: Registered tcp transport module. [ 6.110236] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.110259] PCI: CLS 0 bytes, default 32 [ 6.110714] Unpacking initramfs... [ 6.844464] Freeing initrd memory: 6288K [ 6.845824] Initialise system trusted keyrings [ 6.846195] Key type blacklist registered [ 6.846612] workingset: timestamp_bits=30 max_order=15 bucket_order=0 [ 6.860024] zbud: loaded [ 6.866104] NFS: Registering the id_resolver key type [ 6.866181] Key type id_resolver registered [ 6.866199] Key type id_legacy registered [ 6.866232] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 6.866250] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 6.866265] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 6.867729] fuse: init (API version 7.31) [ 6.868001] *** VALIDATE fuse *** [ 6.868029] *** VALIDATE fuse *** [ 6.868948] orangefs_debugfs_init: called with debug mask: :none: :0: [ 6.869268] orangefs_init: module version upstream loaded [ 6.917921] Key type asymmetric registered [ 6.917957] Asymmetric key parser 'x509' registered [ 6.918051] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 6.925386] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 6.926983] printk: console [ttyS0] disabled [ 6.927162] 44200000.serial: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A [ 7.566814] printk: console [ttyS0] enabled [ 7.587381] loop: module loaded [ 7.593610] scsi host0: sata_oxnas [ 7.598535] ata1: SATA max UDMA/133 irq 57 [ 7.603440] sata_oxnas: resetting SATA core [ 7.666242] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 [ 7.673267] nand: Hynix H27U1G8F2BTR-BC [ 7.677849] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 7.686192] Scanning device for bad blocks [ 7.695311] Bad eraseblock 54 at 0x0000006c0000 [ 7.760005] Bad eraseblock 802 at 0x000006440000 [ 7.770140] Bad eraseblock 863 at 0x000006be0000 [ 7.788249] 2 cmdlinepart partitions found on MTD device 41000000.nand-controller [ 7.796421] Creating 2 MTD partitions on "41000000.nand-controller": [ 7.803445] 0x000000000000-0x000000e00000 : "boot" [ 7.809909] 0x000000e00000-0x000008000000 : "data" [ 7.817505] oxnas-dwmac 40400000.ethernet: IRQ eth_lpi not found [ 7.824322] oxnas-dwmac 40400000.ethernet: PTP uses main clock [ 7.830904] oxnas-dwmac 40400000.ethernet: no reset control found [ 7.906401] oxnas-dwmac 40400000.ethernet: User ID: 0x12, Synopsys ID: 0x35 [ 7.914042] oxnas-dwmac 40400000.ethernet: DWMAC1000 [ 7.919823] oxnas-dwmac 40400000.ethernet: DMA HW capability register supported [ 7.927820] oxnas-dwmac 40400000.ethernet: RX Checksum Offload Engine supported [ 7.935792] oxnas-dwmac 40400000.ethernet: COE Type 2 [ 7.941537] oxnas-dwmac 40400000.ethernet: TX Checksum insertion supported [ 7.949107] oxnas-dwmac 40400000.ethernet: Wake-Up On Lan supported [ 7.956072] oxnas-dwmac 40400000.ethernet: Enhanced/Alternate descriptors [ 7.963535] oxnas-dwmac 40400000.ethernet: Enabled extended descriptors [ 7.970841] oxnas-dwmac 40400000.ethernet: Ring mode enabled [ 7.977200] oxnas-dwmac 40400000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 7.985725] oxnas-dwmac 40400000.ethernet: device MAC address ae:14:bb:64:9a:ea [ 8.038801] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 8.049021] mdio_bus stmmac-0:03: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:03, irq=POLL) [ 8.060244] PPP generic driver version 2.4.2 [ 8.065523] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.072803] ehci-pci: EHCI PCI platform driver [ 8.126064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8.133222] ata1.00: supports DRM functions and may not be fully accessible [ 8.140922] ata1.00: ATA-10: Crucial_CT275MX300SSD1, M0CR070, max UDMA/133 [ 8.148590] ata1.00: 537234768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 8.158315] ata1.00: supports DRM functions and may not be fully accessible [ 8.286069] oxnas-ehci 40200100.ehci: EHCI Host Controller [ 8.292272] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1 [ 8.300904] oxnas-ehci 40200100.ehci: irq 52, io mem 0x40200100 [ 8.336061] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00 [ 8.343078] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04 [ 8.352071] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.359992] usb usb1: Product: EHCI Host Controller [ 8.365542] usb usb1: Manufacturer: Linux 5.4.224-oxnas-tld-1 ehci_hcd [ 8.372761] usb usb1: SerialNumber: 40200100.ehci [ 8.379136] hub 1-0:1.0: USB hub found [ 8.383641] hub 1-0:1.0: 2 ports detected [ 8.389742] usbcore: registered new interface driver cdc_wdm [ 8.396262] usbcore: registered new interface driver usb-storage [ 8.403238] usbcore: registered new interface driver usbserial_generic [ 8.410595] usbserial: USB Serial support registered for generic [ 8.417996] mousedev: PS/2 mouse device common for all mice [ 8.424371] i2c /dev entries driver [ 8.430254] hidraw: raw HID events driver (C) Jiri Kosina [ 8.436615] usbcore: registered new interface driver usbhid [ 8.442856] usbhid: USB HID core driver [ 8.449221] NET: Registered protocol family 10 [ 8.456291] Segment Routing with IPv6 [ 8.460736] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.469685] NET: Registered protocol family 17 [ 8.475304] Key type dns_resolver registered [ 8.481016] registered taskstats version 1 [ 8.485795] Loading compiled-in X.509 certificates [ 8.491586] zswap: loaded using pool lzo/zbud [ 8.497310] Key type ._fscrypt registered [ 8.502003] Key type .fscrypt registered [ 8.596582] Key type big_key registered [ 8.640622] Key type encrypted registered [ 8.649843] hctosys: unable to open rtc device (rtc0) [ 23.516088] ata1.00: qc timeout (cmd 0x47) [ 23.520865] sata_oxnas: resetting SATA core [ 23.867942] ata1.00: READ LOG DMA EXT failed, trying PIO [ 23.873932] ata1.00: ATA Identify Device Log not supported [ 23.880148] ata1.00: Security Log not supported [ 23.885376] ata1.00: configured for UDMA/133 [ 23.890375] sata_oxnas: resetting SATA core [ 25.616061] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.623203] ata1.00: supports DRM functions and may not be fully accessible [ 25.633231] ata1.00: supports DRM functions and may not be fully accessible [ 25.642933] ata1.00: configured for UDMA/133 [ 25.648586] scsi 0:0:0:0: Direct-Access ATA Crucial_CT275MX3 R070 PQ: 0 ANSI: 5 [ 25.658670] ata1.00: Enabling discard_zeroes_data [ 25.665049] sd 0:0:0:0: [sda] 537234768 512-byte logical blocks: (275 GB/256 GiB) [ 25.673433] sd 0:0:0:0: [sda] Write Protect is off [ 25.678978] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.679214] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.690152] ata1.00: Enabling discard_zeroes_data [ 25.697382] sda: sda1 [ 25.702072] ata1.00: Enabling discard_zeroes_data [ 25.708807] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.715668] Freeing unused kernel memory: 1024K [ 25.737297] Checked W+X mappings: passed, no W+X pages found [ 25.743633] Run /init as init process [ 26.488522] gpio-41 (i2c-gpio): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 26.488878] input: keys as /devices/platform/keys/input/input0 [ 26.531870] gpio-42 (i2c-gpio): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 26.585052] i2c-gpio i2c-gpio: using lines 41 (SDA) and 42 (SCL) [ 37.364904] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 37.513815] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 41.401538] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 44.166062] Adding 524284k swap on /swapfile. Priority:-2 extents:11 across:195181948k SSFS [ 44.722352] random: dd: uninitialized urandom read (32 bytes read) [ 45.179911] oxnas-dwmac 40400000.ethernet eth0: PHY [stmmac-0:00] driver [Generic PHY] [ 45.193405] oxnas-dwmac 40400000.ethernet eth0: No Safety Features support found [ 45.201533] oxnas-dwmac 40400000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 45.210949] oxnas-dwmac 40400000.ethernet eth0: registered PTP clock [ 45.218071] oxnas-dwmac 40400000.ethernet eth0: configuring for phy/rgmii link mode [ 48.316733] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 48.325685] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 51.200983] random: mktemp: uninitialized urandom read (6 bytes read) [ 51.283192] random: mktemp: uninitialized urandom read (6 bytes read) [ 53.431905] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 53.516718] random: dbus-daemon: uninitialized urandom read (12 bytes read) [ 53.938526] random: avahi-daemon: uninitialized urandom read (4 bytes read) [ 57.906334] random: crng init done [ 57.910425] random: 1 urandom warning(s) missed due to ratelimitinganything missing? ;-)
Re: revive Medion oxnas stg-212 April 25, 2023 04:57AM |
Registered: 6 years ago Posts: 103 |
[ 5434.888911][ T3749] oxnas-dwmac 40400000.ethernet eth0: Link is Down [ 5438.009594][ T3749] oxnas-dwmac 40400000.ethernet eth0: Link is Up - 1Gbps/Full - flow control offalso apt-get update often needs to be started, as apt cache quite often fails with segmentation fault or cache crc error!?
Re: revive Medion oxnas stg-212 April 25, 2023 02:49PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 April 25, 2023 03:33PM |
Admin Registered: 13 years ago Posts: 19,102 |
apt-get clean dpkg --clear-avail apt-get update
Re: revive Medion oxnas stg-212 April 26, 2023 12:49AM |
Registered: 6 years ago Posts: 103 |
Quote
Ext4 should work. Probably you did not format the Ext4 file system with "lazy_itable_init=0" option. Ext4 rootfs must be finalized before it can be used for booting.
Quote
Try
apt-get clean
dpkg --clear-avail
apt-get update
Re: revive Medion oxnas stg-212 April 26, 2023 10:53AM |
Registered: 6 years ago Posts: 103 |
mkfs.ext4 -E lazy_itable_init=0 -L rootfs /dev/sda1didn't work out...
OX820> ide reset Reset IDE: Bus 0: OK Device 0: Model: Crucial_CT275MX300SSD1 Firm: M0CR070 Ser#: 17251799E2D8 Type: Hard Disk Supports 48-bit addressing Capacity: 262321.6 MB = 256.1 GB (537234768 x 512)
OX820> ext4ls ide 0:1 / <DIR> 4096 . <DIR> 4096 .. <DIR> 16384 lost+found 196077630 Debian-4.14.180-oxnas-tld-1-rootfs-bodhi.tar.bz2 <DIR> 4096 opt <DIR> 0 boot <DIR> 0 sbin <DIR> 4096 bin <DIR> 0 mnt <DIR> 0 root <DIR> 4096 sys <DIR> 0 media <DIR> 0 srv <DIR> 0 lib <DIR> 0 dev <DIR> 0 etc <DIR> 0 tmp <DIR> 0 var <DIR> 0 proc <DIR> 0 usr <DIR> 0 run <DIR> 0 home
OX820> ext4ls ide 0:1 /boot OX820>not sure why it reads 1st level of folders but not their content. crazy... bin, sys, opt and lost+found were read - on another reboot just lost+found!? all have the same owner and user rights. mysterious!
Re: revive Medion oxnas stg-212 April 26, 2023 02:55PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 May 02, 2023 04:04PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 May 02, 2023 04:35PM |
Admin Registered: 13 years ago Posts: 19,102 |
Re: revive Medion oxnas stg-212 May 02, 2023 05:59PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 May 02, 2023 06:19PM |
Admin Registered: 13 years ago Posts: 19,102 |
Quote
Updated 16 May 2014
I've uploaded the 2013.10 u-Boot image for Pogoplug V3 Oxnas
.....
Download U-Boot image at Dropbox:
uboot.2013.10-tld-3.ox820.bodhi.tar
md5
c916498ff7396cc81c9c9aa0a2d714d3
This archive contains the following 3 files:
uboot.spl.2013.10.ox820.mtd0.img
uboot.2013.10-tld-3.ox820.mtd0.img
pogopro_uboot_env.img
Re: revive Medion oxnas stg-212 May 03, 2023 01:18PM |
Registered: 6 years ago Posts: 103 |
Re: revive Medion oxnas stg-212 May 03, 2023 06:47PM |
Admin Registered: 13 years ago Posts: 19,102 |