Is there a GUI interface for Arch, Debian squeeze or thereabouts?

I'm too scared to partition my only working USB stick with samba, but eventually I'll have to find a way. Seems 30% of my 4GB USB stick is used on Arch Linux, which is probably way too much. Eventually i'll get the courage to try the Samba technique, and of course soon I'll be happy to try the Debian, now that it's so interesting to swap out USB sticks for a different boot/user experience.

I guess what I'm asking is, what's a good way to view and navigate the contents of what's installed?

JoeyPogoPlugE02 Wrote:
-------------------------------------------------------
> I'm too scared to partition my only working USB
> stick with samba, but eventually I'll have to find
> a way. Seems 30% of my 4GB USB stick is used on
> Arch Linux, which is probably way too much.
> Eventually i'll get the courage to try the Samba
> technique, and of course soon I'll be happy to try
> the Debian, now that it's so interesting to swap
> out USB sticks for a different boot/user
> experience.
>
> I guess what I'm asking is, what's a good way to
> view and navigate the contents of what's
> installed?

No need for separate partition. Samba will fit just fine.
For desktop: lightVNC, xfce, xrdp.

All these will fit on a 4G, with a lot of room to spare.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> No need for separate partition. Samba will fit
> just fine.
> For desktop: lightVNC, xfce, xrdp.
>
> All these will fit on a 4G, with a lot of room to
> spare.

Speaking of GUI, do you know if the current 3.18 kernel support USB display adapters with DisplayLink chipsets? I recall seeing a reference to it in a post (maybe from Arch Linux?) from a couple years ago but much has changed (obviously) since then. Just curious if a Plug could be used with one.



Edited 1 time(s). Last edit at 02/20/2015 05:33PM by LeggoMyEggo.

Leggo,

I dont use display so not sure.

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)

bodhi Wrote:
-------------------------------------------------------
> Leggo,
>
> I dont use display so not sure.

It would be a nice experniment to see if the little mighty headless 'Plug could actually pull it off. I'll have to try it with one of my Oxnas plugs.

hey you guys thanks a lot! For now and a brief while, I'll guinea pig Arch Linux and then once some things are squared away hopefully get on debian next week and do that right. Concerning Arch Linux (Arch being the reason i posted in this forum) has all kinds of incomplete website tutorials out there. Even at the Arch Linux site. I'd like to share a link that makes sense to by newbness state of mind:
un-WARNING: previous I thought the following link was somewhat bad, but the only thing that doesn't work is webmin. Samba good
http://www.entechlog.com/2014/08/pogopluge02-v4-arch-linux-samba-webmin.html

Some good news to report:
1. Samba works great
2. The freeware Partition Wizard, in Windows, copied the USB partitions to another stick and other than re-telling Samba to start and then auto start, everything seems to work.This is preliminary of course. I'll be testing ways to copy partitions because it makes some sense.

Webmin is another story. For arch linux I'm having a downer getting it working. Could be because my IP for the pogoplug is 192.168.178.100 and my localhost and 192.168.1 internal config number isn't good fer it. I'm not IP-literate.

I'm getting better at WinSCP and putty if anyone has a suggestion. Thanks a lot if you do :-)



Edited 3 time(s). Last edit at 02/21/2015 11:46PM by JoeyPogoPlugE02.

Look around this guy's website for some help http://blog.qnology.com/2014/11/debian-on-pogoplug-tutorial-webmin.html

http://blog.qnology.com/2013/03/tutorial-pogoplug-e02-with-arch-linux.html >>>>> see the webmin section with this guidance:

pacman -Sy webmin perl-net-ssleay nano

#allow any IP to connect
sed -i 's^127.0.0.1^0.0.0.0^' /etc/webmin/miniserv.conf

#start webmin
systemctl start webmin

#auto start after reboot
systemctl enable webmin

#https://PogoplugIPAddress:10000



Edited 2 time(s). Last edit at 02/24/2015 12:08PM by LeggoMyEggo.