udev problem with PEARL display at dockstar / lcd4linux

Dear all,

context: PEARL Display at Dockstar on Debian Wheezy

I have problems with udev while connecting the PEARL display to a dockstar. The problem is not lcd4linux, that works and the display is immediately in hack-mode after connecting via usb. So a "/usr/local/bin/lcd4linux" on the commandline works out of the box.

The 70-dpf.rules in /etc/udev/rules.d that was written should not be a problem too, because the same config works on another computer (notebook, same OS, same display, same config of lcd4linux):

SUBSYSTEM=="usb", ACTION=="add", ENV{ID_MODEL_ID}=="0102", ENV{ID_VENDOR_ID}=="1908", RUN+="/usr/local/bin/lcd4linux"
SUBSYSTEM=="usb", ACTION=="remove", ENV{ID_MODEL_ID}=="0102", ENV{ID_VENDOR_ID}=="1908", RUN+="/usr/bin/killall lcd4linux"

Now for lsusb:

lsusb -v

Bus 001 Device 004: ID 1908:0102 GEMBIRD
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0         8
  idVendor           0x1908 GEMBIRD
  idProduct          0x0102
  bcdDevice            2.00
  iManufacturer           2 hackfin
  iProduct                3 USB-Display
  iSerial                 1 0.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              200mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              4 libusb
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x1a68
  (Bus Powered)
  Debug Mode

That seems to be ok too. Now for udev (debug mode /var/log/syslog):

Jul  1 16:35:20 seadock kernel: [ 1809.696161] usb 1-1.4: new full-speed USB device number 9 using orion-ehci
Jul  1 16:35:21 seadock kernel: [ 1809.825768] usb 1-1.4: New USB device found, idVendor=1908, idProduct=0102
Jul  1 16:35:21 seadock udevd[8645]: seq 636 queued, 'add' 'usb'
Jul  1 16:35:21 seadock udevd[8645]: passed 319 bytes to netlink monitor 0xba2320
Jul  1 16:35:21 seadock udevd[8664]: seq 636 running
Jul  1 16:35:21 seadock udevd[8664]: device 0xba3b58 has devpath '/devices/platform/orion-ehci.0/usb1/1-1/1-1.4'
Jul  1 16:35:21 seadock udevd[8664]: no db file to read /run/udev/data/c189:8: No such file or directory
Jul  1 16:35:21 seadock udevd[8664]: IMPORT builtin 'usb_id' /lib/udev/rules.d/91-permissions.rules:30
Jul  1 16:35:21 seadock udevd[8664]: ID_VENDOR=hackfin
Jul  1 16:35:21 seadock udevd[8664]: ID_VENDOR_ENC=hackfin
Jul  1 16:35:21 seadock udevd[8664]: ID_VENDOR_ID=1908
Jul  1 16:35:21 seadock udevd[8664]: ID_MODEL=USB-Display
Jul  1 16:35:21 seadock udevd[8664]: ID_MODEL_ENC=USB-Display
Jul  1 16:35:21 seadock udevd[8664]: ID_MODEL_ID=0102
Jul  1 16:35:21 seadock udevd[8664]: ID_REVISION=0200
Jul  1 16:35:21 seadock udevd[8664]: ID_SERIAL=hackfin_USB-Display_0.1
Jul  1 16:35:21 seadock udevd[8664]: ID_SERIAL_SHORT=0.1
Jul  1 16:35:21 seadock udevd[8664]: ID_BUS=usb
Jul  1 16:35:21 seadock udevd[8664]: ID_USB_INTERFACES=:ff0000:
Jul  1 16:35:21 seadock udevd[8664]: MODE 0664 /lib/udev/rules.d/91-permissions.rules:36
Jul  1 16:35:21 seadock udevd[8664]: no node name set, will use kernel supplied name 'bus/usb/001/009'
Jul  1 16:35:21 seadock udevd[8664]: creating device node '/dev/bus/usb/001/009', devnum=189:8, mode=01664, uid=0, gid=0
Jul  1 16:35:21 seadock udevd[8664]: preserve file '/dev/bus/usb/001/009', because it has correct dev_t
Jul  1 16:35:21 seadock udevd[8664]: set permissions /dev/bus/usb/001/009, 021664, uid=0, gid=0
Jul  1 16:35:21 seadock udevd[8664]: creating symlink '/dev/char/189:8' to '../bus/usb/001/009'
Jul  1 16:35:21 seadock udevd[8645]: seq 637 queued, 'add' 'usb'
Jul  1 16:35:21 seadock udevd[8664]: created db file '/run/udev/data/c189:8' for '/devices/platform/orion-ehci.0/usb1/1-1/1-1.4'
Jul  1 16:35:21 seadock udevd[8664]: passed -1 bytes to netlink monitor 0xba3a00
Jul  1 16:35:21 seadock udevd[8664]: seq 636 processed with 0
Jul  1 16:35:21 seadock udevd[8645]: seq 636 done with 0
Jul  1 16:35:21 seadock udevd[8645]: passed 341 bytes to netlink monitor 0xba2320
Jul  1 16:35:21 seadock udevd[8664]: seq 637 running
Jul  1 16:35:21 seadock udevd[8664]: device 0xbaa7b0 has devpath '/devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0'
Jul  1 16:35:21 seadock udevd[8664]: no db file to read /run/udev/data/+usb:1-1.4:1.0: No such file or directory
Jul  1 16:35:21 seadock udevd[8664]: RUN '/sbin/modprobe -b $env{MODALIAS}' /lib/udev/rules.d/80-drivers.rules:7
Jul  1 16:35:21 seadock kernel: [ 1809.832698] usb 1-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Jul  1 16:35:21 seadock kernel: [ 1809.840069] usb 1-1.4: Product: USB-Display
Jul  1 16:35:21 seadock kernel: [ 1809.844272] usb 1-1.4: Manufacturer: hackfin
Jul  1 16:35:21 seadock kernel: [ 1809.848574] usb 1-1.4: SerialNumber: 0.1
Jul  1 16:35:21 seadock udevd[8888]: starting '/sbin/modprobe -b usb:v1908p0102d0200dcFFdscFFdpFFicFFisc00ip00'
Jul  1 16:35:21 seadock udevd[8664]: '/sbin/modprobe -b usb:v1908p0102d0200dcFFdscFFdpFFicFFisc00ip00'(err) 'FATAL: Module usb:v1908p0102d0200dcFFdscFFdpFFicFFisc00ip00 not found.'
Jul  1 16:35:21 seadock udevd[8664]: '/sbin/modprobe -b
usb:v1908p0102d0200dcFFdscFFdpFFicFFisc00ip00' [8888] exit with return code 1
Jul  1 16:35:21 seadock udevd[8664]: passed -1 bytes to netlink monitor 0xba3a00
Jul  1 16:35:21 seadock udevd[8664]: seq 637 processed with 0
Jul  1 16:35:21 seadock udevd[8645]: seq 637 done with 0

It seems the written 70-..rules was not used.

What's wrong and how to fix it?
Any package missing?

here the error while disconnecting the display:

Jul  1 16:40:21 seadock kernel: [ 2110.520891] usb 1-1.4: USB disconnect, device number 9
Jul  1 16:40:21 seadock udevd[8645]: seq 638 queued, 'remove' 'usb'
Jul  1 16:40:21 seadock udevd[8645]: passed 344 bytes to netlink monitor 0xba2320
Jul  1 16:40:21 seadock udevd[8664]: seq 638 running
Jul  1 16:40:21 seadock udevd[8664]: no db file to read /run/udev/data/+usb:1-1.4:1.0: No such file or directory
Jul  1 16:40:21 seadock udevd[8664]: passed -1 bytes to netlink monitor 0xba3a00
Jul  1 16:40:21 seadock udevd[8664]: seq 638 processed with 0
Jul  1 16:40:21 seadock udevd[8645]: seq 638 done with 0
Jul  1 16:40:21 seadock udevd[8645]: seq 639 queued, 'remove' 'usb'
Jul  1 16:40:21 seadock udevd[8645]: passed 322 bytes to netlink monitor 0xba2320
Jul  1 16:40:21 seadock udevd[8664]: seq 639 running
Jul  1 16:40:21 seadock udevd[8664]: device 0xbaa7b0 filled with db file data
Jul  1 16:40:21 seadock udevd[8664]: RUN '/usr/bin/killall lcd4linux' /etc/udev/rules.d/70-dpf.rules:14
Jul  1 16:40:21 seadock udevd[8664]: device node '/dev/bus/usb/001/009' not found
Jul  1 16:40:21 seadock udevd[8664]: removing device node '/dev/bus/usb/001/009'
Jul  1 16:40:21 seadock udevd[8998]: starting '/usr/bin/killall lcd4linux'
Jul  1 16:40:21 seadock udevd[8664]: '/usr/bin/killall lcd4linux'(err) 'lcd4linux: no process found'
Jul  1 16:40:21 seadock udevd[8664]: '/usr/bin/killall lcd4linux' [8998] exit with return code 1
Jul  1 16:40:21 seadock udevd[8664]: passed -1 bytes to netlink monitor 0xba3a00
Jul  1 16:40:21 seadock udevd[8664]: seq 639 processed with 0
Jul  1 16:40:21 seadock udevd[8645]: seq 639 done with 0

thanks,
best
lcg