Welcome! Log In Create A New Profile

Advanced

LED daemon for Pogoplug Debian

Posted by BuckNaked 
LED daemon for Pogoplug Debian
July 13, 2017 12:18AM
I've written an LED daemon for Pogoplugs running Debian. The daemon flashes the front panel green LED in either International Morse code or ASCII to display a text message. Display speed is settable from 5 words per minute to 30 WPM.

It was written primarily for entertainment but may serve a useful purpose on systems that are not monitored frequently. If the system locks up and the daemon stops running, no more blinking lights on the Pogoplug.

It was developed on a Pogoplug E02 running bodhi's Debian 4.4.0-kirkwood-tld-1. The LED control device and control commands may be different on other linux systems or other devices. This can be adapted readily by editing the definitions in the source file. A test program is supplied to confirm that it will (or will not) work out-of-the-box.

It can be downloaded at the link below. Note that the host site is strongly protected against bots and scrapers, so it may not be accessible everywhere. If anyone wants to re-host the software inside or outside the US they are welcome to do so.

http://www.miim.com/software/linux/pogoleds.html
Re: LED daemon for Pogoplug Debian
July 13, 2017 07:30AM
@bodhi
one for the WIKI methinks :)
Re: LED daemon for Pogoplug Debian
July 13, 2017 09:34PM
Gravelrash Wrote:
-------------------------------------------------------
> @bodhi
> one for the WIKI methinks :)

It surely is :) imagine you are on a deserted island with a solar powered pogoplug :))

-bodhi
===========================
Forum Wiki
bodhi's corner (buy bodhi a beer)
Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message: