Ok. I'm pleased to report that I was able to get my PP V3 up and running. It ended up being a problem with the uBoot env variables. The configuration that finally worked is listed below: autoload=no baudrate=115200 boot_nand=run load_nand boot || run load_nand2 boot bootargs=console=ttyS0,115200n8 bootcmd=run dt_bootcmd_usb bootdelay=5 console=console=ttyS0,115200n8 dt_bootcmd_uby thebladerunner@gmail.com - uBoot
I've been following Robert's struggle for the past few posts and seem to be having the same issue. I have at least 6 pogoplugs i've been working with and on over the last couple of years. I've successfully installed Debian on a V3 and a V3Pro. I borked a V4 while trying to get a decent serial connection soldered onto the board. I'm back to working on another of the V3by thebladerunner@gmail.com - uBoot
I recently acquired 3 PPV3 devices with the B01 revision. They all work perfectly. Along with my arudino projects and raspberrypi projects I've decided to add these low powered devices. I am a long time user of Debian on a lot of different hardware platforms and would like to install it on at least one of these devices. That said, I'm new to this forum and I'm having a hard timeby thebladerunner@gmail.com - Debian