Hi guys, you all did a great job. Currently I use a NSA325 on Debian Stretch/ Kirkwood kernel 4.x and want to upgrade to NAS326. Do you think it is possible to change the kernel to MVEBU, do the installation stuff with kwboot, change the hdd's and everything is done. Or is there a reason to setup a completely new System from bodhi's rootfs? Thx Ottoby ottok - Debian
Hi bodhi, the hashs for linux-4.12.4-mvebu-tld-1-bodhi.tar.bz2 do not match. Can you check it, please. Thx Ottoby ottok - Debian
Hi marcint43, have you flashed the uboot from bodhi? After I flashed the latest uboot on my NSA325v2, my WOL MAC was switched to the default MAC 00:50:43:00:xx:xx. I' ve tried to change the MAC in the uboot settings, without success. But the WOL on the default MAC works fine for me now.by ottok - Debian
Hello, same problem here. After I flashed the current uboot on my NSA325, I'm not able to boot into the stock firmware. Booting with flash drive to debian works without any problems. The kernel ist loaded from nand to memory, but the system freeze after booting. Can someone help me, to find out the correct parameters? I have attached the screenlog with more details. mtdparby ottok - uBoot
Hi Blackclaw, I don't use a raid1 on debian, but i use my 2 JBOD partitions which was created with the Zyxel Firmware. You have to use mdadm to assemble the partitions into the file filesystem as /dev/md0 and /dev/md1 the you can mount the partitions to /mnt. Please check the manual for the correct parameters. - Good Luck! I've tried different settings to boot into the old Firmwarby ottok - uBoot
Hello, after I flashed the current uboot on my NSA325, I'm not able to boot into the stock firmware. Booting with flash drive to debian works without any problems. The kernel ist loaded from nand to memory, but the system freeze after booting. Can someone help me, to find out the correct parameters? I have attached the screenlog with more details. mtdparts=mtdparts=orion_nandby ottok - uBoot