hello, many tks for your response. Well, i will need some help from the community because i am not able to understand all that actions to do. 1-fsck is ok 2-backup your USB rootfs. ==> what do you mean by backup the roots ? 3. If you can boot into Debian, then download and install new kernel from this thread (the latest is linux-3.14.0-kirkwood-tld-2-bodhi.tar.bz2 dated 21 April 2014):by acognard - Debian
hi bodhy, hi all, here are the results. root@DockStar:/boot# ls -lart total 18640 -rw-r--r-- 1 root root 4537126 1 janv. 1970 initrd.img-2.6.32-5-kirkwood -rw-r--r-- 1 root root 1435696 1 janv. 1970 uImage -rw-r--r-- 1 root root 4537190 1 janv. 1970 uInitrd -rw-r--r-- 1 root root 4536740 9 sept. 2013 uInitrd.bak -rw-r--r-- 1 root root 1437272 9 sept. 2013 uImage.bak -rby acognard - Debian
Hi all, i am facing an issue while upgrading my debian on a Dockstar. apt-get upgrade -y Lecture des listes de paquets... Fait Construction de l'arbre des dépendances Lecture des informations d'état... Fait 0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour. 1 partiellement installés ou enlevés. Après cette opération, 0 o d'espace disquby acognard - Debian
Hi all, the problem was from my switch. Any way, another issue : # fw_setenv arcNumber 2998 # Starting debootstrap installation /usr/sbin/debootstrap: line 406: in_path: not found /usr/sbin/debootstrap: line 406: in_path: not found /usr/sbin/debootstrap: line 462: in_path: not found /usr/sbin/debootstrap: line 462: in_path: not found /usr/sbin/debootstrap: lby acognard - Rescue System
Hi all, i am facing a new issue. I did many times before a complete reinstallation of debian on my external usb hdd whithout any problem. Today, i plugged the dockstar (without any usb) & wanted to play back debian . I got hte errors bellow : rescue:/tmp# wget http://projects.doozan.com/debian/dockstar.debian-squeeze.sh wget: bad address 'projects.doozan.com' rescue:/tmp#by acognard - Rescue System
well, a carriage return appeared in /usr/bin/mkimage -A arm -O linux -T ramdisk -C gzip -a 0x00000000 -e 0x00000000 -n initramfs -d /boot/initrd.img-2.6.32-dockstar /boot/uInitrd so it was not correctly played :(. it was so stupid ! sincerly. Arnaudby acognard - Rescue System
hi all, solved ! finaly, a copy/paste in my procedure was bad ! tks all. Arnaudby acognard - Rescue System
hi all, any more information. # nc -l -u -p 6666 U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 3 USB Device(s) found scanning bus for storage devices... Device NOT ready Request Sense returned 00 00 00 1 Storageby acognard - Rescue System
Pazos, this is quiet strange because, before applying the rescue script, the DS was booting on the usb and not without it. now, it boots on DS, and not on USB stick :( Anyway, in this status (rescue applyied), can i install a new debian on a empty external usb hard drive ? Tks. Arnaudby acognard - Rescue System
hi here it is rescue:~# fw_printenv ethact=egiga0 bootdelay=3 baudrate=115200 mainlineLinux=yes console=ttyS0,115200 led_init=green blinking led_exit=green off led_error=orange blinking mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) mtdids=nand0=orion_nand partition=nand0,2 stdin=serial stdout=serial stderr=serial rescue_set_bootargs=setenv bootargs consby acognard - Rescue System
hi all done, but don't know what is the aim of this. now my DS does not boot anymore on my usb disk :( i launched the install_rescue.sh script, and all was ok. therefore, i rebooted it. and now, it works only on "rescue:~# ". what did i missed ? i did not see anything wrong during install rescue run. Many tks. Arnaudby acognard - Rescue System
re 1/ by 'Jeff's rescue system v.2' did you mean using this script ? cd /tmp wget http://jeff.doozan.com/debian/rescue/install_rescue.sh chmod +x install_rescue.sh ./install_rescue.sh is that all i have to do ? Tks. Arnaudby acognard - Rescue System
hi pazos, many tks for your help, but it is quiet difficult to understand what you mean for the newbit i am. What you suggest is 1/replace pogoplug firmware using a script (eff's rescue system v.2). ok, this seems to be what i have to do. will try to find this scipt. 2/keep pogo firmware. no, but i am not really sure to understand what it is. will look for on google. will let youby acognard - Rescue System
Hi all, (sorry for my english :)) i am facing a new issue with my ds. using another VM linux, i use nc -l -u -p 6666 to see boot log without any usb disk. but it turns around 1. U-Boot 2010.09 (Oct 23 2010 - 11:49:22) 2. Marvell-Dockstar/Pogoplug by Jeff Doozan 3. Hit any key to stop autoboot: 4 i hit return key 1. Marvell>> ls 2. ls 3. drwxr-xrby acognard - Rescue System
1 up... i am still without having any success using my hdd... any help ? any idea ? Many tks. Arnaudby acognard - Debian
Hi all, i am facing a new issue while using boot from usb hdd seagate. U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan Hit any key to stop autoboot: 0 (Re)start USB... USB: Register 10011 NbrPorts 1 USB EHCI 1.00 scanning bus for devices... 4 USB Device(s) found scanning bus for storage devices... 1 Storage Dby acognard - Debian