any update? just purchased a pogo pro biz.by cHIbINAb - uBoot
Success! Thank you very much! debian login: root Password: Linux debian 6.5.7-kirkwood-tld-1 #2 PREEMPT Wed Oct 18 21:14:11 PDT 2023 armv5tel The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY,by cHIbINAb - uBoot
OK, I think I followed the instructions properly this time. Let me know, thanks again! PogoE02> setenv usb_set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 earlyprintk=serial' PogoE02> setenv load_uimage 'ext2load usb 0:1 0x800000 /boot/uImage' PogoE02> setenv load_uinitrd 'ext2load usb 0:1 0x2100000 /boot/uInitrd' Poby cHIbINAb - uBoot
Thanx! I'm getting a new error. PogoE02> printenv baudrate=115200 bootcmd=usb start; setenv letter 9;for type in usb; do for disk in 0 1 2 3; do if ${type} part ${disk};then setexpr letter $letter + 1;run load;fi;done;done; bootdelay=3 bootm=echo Booting from ${disk} ...; run setargs; bootm ${loadaddr}; bootz=echo Booting from ${disk} ...; run setargs; bootz ${loadaddr} - ${fdby cHIbINAb - uBoot
Hey guys need help, I left this project incomplete a while ago. What are the next steps I need to do to get this running linux? Thanx in advanced. U-Boot 2014.04.R3-1 (May 26 2014 - 19:45:55) Arch Linux ARM Pogo E02 gcc (GCC) 4.8.2 20131219 (prerelease) GNU ld (GNU Binutils) 2.24 PogoE02> printenv baudrate=115200 bootcmd=usb start; setenv letter 9;for type in usb; do for disk in 0 1by cHIbINAb - uBoot
Hey guys, I started this project a long time ago, forgot about. Now I'm here to resurrect this Pink Pogo plug. Ive tried copying debian 5.13.6 kirkwood to a usb but I keep getting errors. I have a serial connection to the pogoplug. SoC: Kirkwood 88F6281_A0 DRAM: 256 MiB WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 Hitby cHIbINAb - Debian
i didnt have anything in the usb ports. what do I put on the usb stick?by cHIbINAb - Debian
Hey guys not really sure whats going on. Connected over serial not sure what to do now. Please advise. sudo picocom -b 115200 /dev/ttyUSB0 picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : no hangup isby cHIbINAb - Debian