Looking for PeerGuardian / MoBlock that works on armel debian (device pogo plug e02). I searched on http://packages.debian.org, google, and cannot find anything usefull.by jst818 - Debian
Check your hdd with "Data Lifeguard Diagnostic for DOS" (full scan, it will take a while to complete) http://support.wdc.com/product/download.asp?groupid=612&sid=2&lang=en I see you are using Western Digital Raptor 10k rpm 74Gb drive through eSATA, has it enough power juice ? Try changing esata cable, external power supply. Found similar problem: https://newit.co.uk/forby jst818 - Rescue System
my qoute QuoteLooks like someone has modified bootloader, because without usb it should boot into stock pogo firmware, but it doesnt, because pogo is not recognized under my.pogoplug.com site. This was my assumption, and could be wrong, cause there are 2 possibilities 1. stock fw with stopped Pogoplug software (hbwd) 2. debian on nand Taking into account tutorial from http://rustybytes.comby jst818 - Debian
Noob question: Device: Pogoplug E02 arcNumber 3542 I first installed this: http://rolandsoft.blogspot.com/2013/02/installing-debian-wheezy-for.html Quote 2. Install Arch Linux or some other Linux derivative, boot from that, login and: Install Rescue system (this replaces the Pogoplug partition with a powerful rescue system. cd /tmp wget http://jeff.doozan.com/debian/rescue/instalby jst818 - Rescue System
QuoteSo its booting into this "squeezeplug" distro from USB? I guess so, but i dont have that particular usb stick. QuoteLooking at the instructions, I bet you could just boot a brand new stick built from bohdi's 3.12.0-kirkwood-tld3 rootfs http://forum.doozan.com/read.php?2,12096 QuoteUpdated 14 Dec 2013: Rootfs Debian-3.12.0-kirkwood-tld-3 was uploaded. This rootfs is to keby jst818 - Debian
Ok, here is the sittuation, i bought 2nd hand Pogoplug E02 with uknown ssh password, previous owner says this distro was installed:http://rustybytes.com/2011/02/16/setup-your-pogoplug-as-a-squeezebox-server/#more-42 . Looks like someone has modified bootloader, because without usb it should boot into stock pogo fimrware, but it doesnt, because pogo is not recognized under my.pogoplug.com site.by jst818 - Debian