Here is the Output of help U-Boot 1.1.4 (Jul 16 2009 - 21:02:16) Cloud Engines (3.4.16) U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690D60 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB 16bit width Flash: 0by msanad - uBoot
it seem something wrong here is the output CE>> setenv load_uImage 'ext2load usb 0:1 0x800000 /boot/uImage' CE>> setenv load_uInitrd 'ext2load usb 0:1 0x1100000 /boot/uInitrd CE>> setenv boot_debian 'bootm 0x800000 0x1100000' CE>> setenv usb_boot 'mw 0x800000 0 1; run load_uImage; run load_uInitrd; run boot_debian' CE>>by msanad - uBoot
Do i have to enter also these commands setenv usb_bootcmd 'run usb_set_bootargs; run usb_boot' setenv bootcmd 'usb start; run usb_bootcmd; usb stop; reset'by msanad - uBoot
hi bodhi i got these errors CE>> setenv usb_boot 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi' ** Too many args (max. 16) ** CE>> setenv usb_boot 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; ext2load usb $usb_devby msanad - uBoot
As i'm using Windows 7 , i'm trying to find some program to formate the USB flash into EXT3 , do u have any suggestion ??by msanad - uBoot
bodhi here is the output CE>> printenv baudrate=115200 loads_echo=0 rootpath=/mnt/ARM_FS/ netmask=255.255.0.0 run_diag=yes console=console=ttyS0,115200 CASset=min MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/mtdblock2 ro ethmtu=1500 usb0Mode=host nandEcc=1bit ethact=egiga0 bootargs=console=ttyS0,115200 root=/dev/mtdblock2 ro serverip=169.254.254.252 ipaddr=1by msanad - uBoot
hello every one i have bought my PogoPlug E02 black one one week ago and yesterday i tried to install uboot (/install_uboot_mtd0.sh) and then to install Arch Linux ARM but unfortunallty i go error message (Installation cancelled.) then i forced the installation with (--no-uboot-check ) but again i go this message (uBoot could not be downloaded, or the MD5 does not match.) the prompet of theby msanad - uBoot