Hi Bodi, I did what you asked. printenv run usb_boot Because the usb was not recognized, i did: usb reset run usb_boot See attachment. Erikby Erik - uBoot
Hi Bodhi, I did what you asked. printenv run usb_boot The usb was not recognized, so i did: > usb reset > run usb_boot See attachment.by Erik - uBoot
Hi Bodhi, I'm sorry, i did use the wrong dtb file. I have corrected step 4, and created a new uImage. But result is still the same; box won't start. without bootargs, kernel boots into panic with bootargs, stops after uncompressing kernel. Added new logfile.by Erik - uBoot
Hi Bodhi, I did copy and paste from my putty screen. Its more than 200 chars width. When i look in the message text, its truncated, but when posted, is cut off. Here are the long ones: standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000; ubifs_bootcmd=nandby Erik - uBoot
Hi Bodi, Thanks for your reply. I added mtdids and midparts (and some usb script env parameters, but thats not important) I think i have to mount the rootfs somehow... I'm not sure if those settings are correct. I have been searching on the forum... If I use the usb_set_bootargs -- the loading stops, after unpacking the kernel This is the enviroment: __ __by Erik - uBoot
Hi I deleted the rootfstype from usb_set_bootargs, so it reads now: usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay When i start without the bootargs. Like this usb reset run usb_boot I get this: __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | |by Erik - uBoot