Hi Bodhi, I followed your guide but it seems didn't work. Marvell>> printenv baudrate=115200 loads_echo=0 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes MALLOC_len=1 ethprime=egiga0 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargby codier - Debian
Hi Bodhi Is there anything I did wrong? root@debian:/media/omv5# fw_setenv set_bootargs 'setenv bootargs console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 $mtdparts init=/bin/systemd' Warning: Bad CRC, using default environment Can't open /dev/mtd0: Permission denied Error: can't write fw_env to flash Thanks Codierby codier - Debian
Thanks Bodhi. It worked. Marvell>> printenv baudrate=115200 loads_echo=0 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes MALLOC_len=1 ethprime=egiga0 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_enby codier - Debian
Update. I added setenv enaMonExt yes but there still issues with FSrun. Maybe this stock linux is too old? Marvell>> printenv baudrate=115200 loads_echo=0 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes MALLOC_len=1 ethprime=egiga0 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dby codier - Debian
Thanks Bodhi I've followed the instruction but it seems didn't recognize some commands when it boot from USB Marvell>> printenv baudrate=115200 loads_echo=0 rootpath=/srv/ubuntu netmask=255.255.255.0 run_diag=yes MALLOC_len=1 ethprime=egiga0 bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) roby codier - Debian
I've followed the instruction to create the USB drive but my ix2 doesn't boot from it. Maybe there is anything wrong with env of my ix2? Booting record __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ _by codier - Debian
Hi bodhi, I am trying to turn my lenovo ix-ng into a OMV4 nas. I browsed the forum and didn't find out whoever has my issue so I started a new thread for this question. I saw fcollingwood's instruction from https://forum.doozan.com/read.php?2,94014 I also saw your notes there so I will skip the envs setting from there. Before I follow fcollingwood's guide I think I willby codier - Debian
Errr.. It was my bad. missed 1 env and I was on the wrong vm. so definitely can not ping it because the vm wasn't on. lol Everything is working now. Thanks again for all your help bodhiby codier - uBoot
I also tried replaced last 3 env with the following but still the same result. says ping failed; host 192.168.2.129 is not alive only difference is 1 time and 5 times. fw_setenv preboot_nc 'setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi' fw_setenv prebootby codier - uBoot
Here. bootcmd_exec=mw 0x800000 0 1; run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x800000 0x1100000 0x1c00000; else bootm 0x800000 0x1100000; fi; else if run load_dtb; then bootm 0x800000 - 0x1c00000; else bootm 0x800000; fi; fi bootcmd_uenv=run uenv_load; if test $uenv_loaded -eq 1; then run uenv_import; fi bootdelay=10 bootdev=usb device=0:1 devices=usb ide mmby codier - uBoot
Hi Bodhi, It seems after I updated new u-boot 2015.10 the netconsole stopped working. It seems dockstar can not ping to my serverip. but I can use my another computer to ping the serverip. I tried to use the old env and your new env for this. either one can ping serverip. I remember I saw someone also has the similar issue but I can not find it anymore.by codier - uBoot
Hi Bodhi, I couldn't boot into rescue. I have no idea why it didn't boot into it. Could you check why? U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:56:21 -0800) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egigaby codier - uBoot
Hi pengu, How's your project works? It looks you have both version (disk and diskless). Have you been to this website? http://iomega.nas-central.org/wiki/Category:Storcenter_ix2-dl I don't know if that will help.by codier - Debian
Thanks bodhi, now time to check rescue.by codier - uBoot
Thanks bodhi, problem fixed. Could you check the following see if it's normal? [ 5.957682] sda: sda1 [ 5.963443] sd 0:0:0:0: Attached SCSI removable disk [ 5.973174] sd 0:0:0:0: Attached scsi generic sg0 type 0 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/localby codier - uBoot
Hi bodhi, I have updated to 2015.10 and seems I can not boot into my USB debian anymore. It should be the env because I saw your env is much cleaner. I did all necessary changes after flash your env though. below is the boot record U-Boot 2015.10-tld-1 (Nov 06 2015 - 15:56:21 -0800) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB (ECC not enabled) WARNING: Cacby codier - uBoot
Hi bodhi, I have few questions regarding to uEnv.txt 1) is this the environment that is the supplement of the the environment from U-boot? 2) Who has first priority? uEnv.txt or Uboot? 3) when there is/are same syntax in both place. who gets loaded? Thanksby codier - uBoot
bodhi Wrote: ------------------------------------------------------- > codier, > > > fw_setenv preboot_nc 'setenv nc_ready 0; for > > pingstat in 1 2 3 4 5; do; sleep 1; if run > > if_netconsole; then setenv nc_ready 1; fi; > done; > > if test $nc_ready -eq 1; then run > > start_netconsole; fi' > > fw_setenv preboot 'run preboby codier - uBoot
Hi bodhi, I've checked this post and your 2015 Uboot post about the neconsole, there are 2 different settings. I don't know which one I should use? fw_setenv preboot_nc 'setenv nc_ready 0; for pingstat in 1 2 3 4 5; do; sleep 1; if run if_netconsole; then setenv nc_ready 1; fi; done; if test $nc_ready -eq 1; then run start_netconsole; fi' fw_setenv preboot 'runby codier - uBoot
bodhi Wrote: ------------------------------------------------------- > codier > > > Just want to confirm something first. > > (1) Do we need to reflash the rescue system > every > > time we flash/upgrade the U-boot? > > No. But as always, you need to make sure that your > u-boot envs stays the same. Meaning that if the > rescue system is workinby codier - uBoot
bodhi Wrote: ------------------------------------------------------- > codier Wrote: > -------------------------------------------------- > ----- > > Hi bodhi, > > > > Is the rescue system still work with your > 2015.10 > > U-boot? > > > > the rescue system from here > > http://forum.doozan.com/read.php?4,7915 > > > &by codier - uBoot
Hi bodhi, Is the rescue system still work with your 2015.10 U-boot? the rescue system from here http://forum.doozan.com/read.php?4,7915 Thanksby codier - uBoot
I see, The main reason is I want to upgrade my kernel from 3.17 to 4.4. Do I need to upgrade my uboot in this case? bodhi Wrote: ------------------------------------------------------- > codier , > > > Can I skip it as I want to keep using my > current > > env? you helped me alot for this when I was > > flashing 2014.07 version and I screwed up the > &by codier - uBoot
Hi Bodhi, I have a question regarding to the B part. B. Flashing default u-boot envs image Can I skip it as I want to keep using my current env? you helped me alot for this when I was flashing 2014.07 version and I screwed up the env. You helped me fix it that's why I am afraid I will screw it up again on this. lol Thanksby codier - uBoot
bodhi Wrote: ------------------------------------------------------- > @laprjns, > > It's because codier has flashed new u-boot and new > default envs images. The original settings for the > old u-boot can be used as is with the new u-boot, > but the new defaults envs can also be flashed to > start anew. > > @codier, > > Replicate what you didby codier - uBoot
laprjns Wrote: ------------------------------------------------------- > codler > The env you posted doesn't look correct for a > dockstar. Here's an example of a line from your > posted env that doesn't appear in my dockstar > uboot enviroment > > bootcmd=run bootcmd_uenv; run bootcmd_usb; run > bootcmd_mmc; run bootcmd_sata; reset > > Aby codier - uBoot
bodhi Wrote: ------------------------------------------------------- > codier, > > > scanning usb for storage devices... 0 Storage > Device(s) found > > > This means your USB was not detected. Try plug it > in the port in the back, right next to the > Ethernet port. Power up. > > OTOH, if you intended to boot rescue system > without the USBby codier - uBoot
It keep doing the following. I got it from nc USB0: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Unknown command 'mmc' - try 'help' Unknown command 'ide' - try 'help' no USB devices available Unknown command 'mmc' - try 'help' Unknowby codier - uBoot
Hi bodhi, my 2nd dockstar seems not working by following the way to fix 1st one. I tried to change the env by following what I did from the 1st one still not working. This is what I got from serial cable. DockStar> printenv arcNumber=2998 baudrate=115200 bootcmd=run bootcmd_uenv; run bootcmd_usb; run bootcmd_mmc; run bootcmd_sata; reset bootcmd_mmc=run mmc_init; run set_bootargs_mmby codier - uBoot