Hello all can you give me addresses to buy a DockStar if there still for sale or for a Pogoplug? or I can order from France for the Pogoplug ago SEVERAL version and I do not laquel is to choose one version or i can install Debian thank youby DJDavid - Debian
Hello to all is thanks for your information enfaite I changed radically I bought a DMP - eBox 3350MX x 86 Compact PC much more dear but with map graphic and map its ect... http://robosavvy.com/store/product_info.php/products_id/1704 but always with a consumption of 5 watt as ca I just left turned my server 24/7 on the other hand I conné really this processor is 1 GHz I would like to knowby DJDavid - Debian
My problem is that I have nothing that appears in the window with my serial port the DockStar is plugged because the HDD is running but I do not have the LED lights at startup So what to do? with a JTAG? thank youby DJDavid - Debian
that the model is good for me? http://cgi.ebay.fr/Pogoplug-Pro-Media-Network-Internet-External-Hard-Drive-Sharing-Device-Server-/170770664137?pt=LH_DefaultDomain_0&hash=item27c2b98ac9 or http://cgi.ebay.fr/PogoPlug-POGO-P02-Media-Sharing-Device-Black-Pro-Connect-Any-External-Hard-Drive-/300659084096?pt=LH_DefaultDomain_2&hash=item4600ad8b40 versions: POGO-P01 - Pro POGO-P21by DJDavid - Debian
do you have a website or I just buy a Pogoplug with an armel processuer but sent to France because the links above do not send to France thank youby DJDavid - Debian
I type commands flash_erase /dev/mtd0 0 4 nandwrite /dev/mtd0 uboot.mtd0.kwb and since it starts up and turns over is there a way to recover the DockStar? food works because the hard drive spins thank youby DJDavid - Debian
voila: starting pid 285, tty'': '/ etc / init.d / rcS' [8.800000] eth0: link down [8.800000] eth0: started udhcpc (v1.7.0) started 0x50 0x43 0x00 HWADDR 00 0x02 0x02 PIP0 2 PIP1 2 Sending discover ... [10.450000] eth0: link up, full duplex, speed 100 Mbps Sending discover ... Sending select for 192.168.1.2 ... Received DHCP NAK 0x50 0x43 0x00 HWADDR 0by DJDavid - Debian
OK I found some command on this forum of jeff TFTP 0 x 800000 uboot-original - mtd0 .kwb GB 0 x 800200 run bootcmd_original SOC: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400 Mhz SysClock = 400 Mhz, TClock = 200 Mhz DRAM case Latency = 5 tRP = 5 tRAS = 18 tRCD = 6 DRAM CS [0] base 0 x 00000000 size 128 MB DRAM Total size 128 MB 16 bit width Flash: 0 kB Addressesby DJDavid - Debian
Hello Now here is my problem do I start the TFTP screen / dev/ttyUSB0 115200 do I start the DockStar and this is what I have: U-Boot 2010.09 (Oct 23 2010 - 11:49:22) Marvell-Dockstar/Pogoplug by Jeff Doozan SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB NAND: 256 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autobootby DJDavid - Debian
Hello I repaired my DockStar with Jtag TIAO;-) I would like to install my Display DL-165 but when I plug the usb to the Dockstar jen' have no display should we install packages or drivers so it works Thank youby DJDavid - Debian
hank you but this is the same as the other link can you give me the power of the processor? it is less efficient than the DockStar? thank youby DJDavid - Debian
Hello I found this plug can you give me your opinion because it looks very nice my http://robosavvy.com/store/product_info.php/products_id/1704 tone can install Debian on it? thank youby DJDavid - Debian
Ok thank you for lieb it is really not expensive but can you tell me if the processor is powerful than the moin DockStar (1.2 ghz) Pogoplug is better now in the ram (256MB) that the DockStar (128MB) by the processor against my favorite one because it is compatible Marvell for Oscam OXNAS that I do is not and I think it is the on your link http://www.buy.com/prod/pogoplug-personal-clouby DJDavid - Debian
Hello can you advise me to a Nas Server to install Debian in mail order because I no longer find DockStar sale Pogoplug and the less well because the fact that 800 Mhz processor rather than 1.2GHz? thank you for your helpby DJDavid - Debian
Thank you for your reply I vien to buy the Jtag the same link that I hope you ca go to repair my DockStar by cons I am French so the tutorial is not too obvious even for me to understand with google translation it is complicated to do with jtag? DockStar my blinking orange so I is not if there is that the JTAG solution as thank you again http://cgi.ebay.fr/Universal-JTAG-Xilinx-Parallelby DJDavid - Debian
Hi I broke my DockStar with the following command # Restore original uBoot wget http://jeff.doozan.com/debian/uboot/files/uboot/uboot.mtd0.dockstar.original.kwb flash_erase /dev/mtd0 0 4 nandwrite /dev/mtd0 uboot.mtd0.dockstar.original.kwb Hi I broke my DockStar with the following command since they connect more t there a solution? or I can buy a DockStar? or maybe another that DockSby DJDavid - Debian
Hello I would like to install Debian with EXT3 or EXT4 partition he yat it a clear and simple tutorial to help me thank youby DJDavid - uBoot
Hello I tried it does not work # / bin / sh-e # # rc.local # # This script IS Executed at the end of EACH multiuser runlevel. # Make sure That the script will "exit 0" on success or Any Other # Value on error. # # In order to enable or disable this script just change the execution # Bits. # # By default this script Does Nothing. vncserver: 0-geometry 1024x768by DJDavid - Debian
Hello I have not received my DL165 Display I received my USB sound card that works I have a USB hub 5V DC 2A can be supplied if it does not work for Display What is a Flubox? PS: Currently I use vncserver to see my desktop but it must run this command by ssh to work: vncserver: 0-geometry 1024x768-depth 16 t is there a way to run on startup in Debian thank youby DJDavid - Debian
Hello I would like to install Debian or Ubuntu on my DockStar but I would like to install the full version Original version that I downloaded from the Debian ISO language french http://cdimage.debian.org/debian-cd/6.0.3/armel/iso-cd/debian-6.0.3-armel-CD-1.iso is the right version? is that possible to install this version or another compatible? or it requires too much resource for Dockby DJDavid - Debian
hello after seeing the forum that there are some that I install MythTV http://forum.doozan.com/read.php?2, 6164.6269 # msg-6269 J have installed Kaffeine but I have error message: kaffeine(809): KUniqueApplication: Cannot find the D-Bus session server: "/usr/bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed. kaffeine(808): KUby DJDavid - Debian
Thank you for all these info just a question it is possible to connect my DVB-s USB with kaffeine I think that the dockstar is not enough resource but as there will be the external graphics card I it is not if ca while go Thank you againby DJDavid - Debian
Hello I had confirmation that the chipset it is the DL-165 I wait to receive any difference between the chipset and the DL-165 DL-195? I'd like to know what difference a stroke VGA and DVI cable? HDMI or if I am the same resolution thank youby DJDavid - Debian
Good ? http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=250925261756 thank youby DJDavid - Debian
re I will post links to good price but I can not know if it's compatible for DockStar can you help me http://cgi.ebay.fr/New-USB-2-0-To-VGA-DVI-HDMI-Multi-Display-Adapter-Converter-/220919589965?pt=UK_Computing_Computer_Components_Graphics_Video_TV_Cards_TW&hash=item336fd56c4d http://cgi.ebay.fr/USB-2-0-To-VGA-DVI-HDMI-Adapter-Converter-9924-/190596418957?pt=LH_DefaultDomain_by DJDavid - Debian
Hello all I have not compressed using the Google translation But that's good? http://www.displaylink.com/shop/index.php?product=5 Here is my e model of LCD TV CONTINENTAL EDISON 65LCD42FHDR3 is recent thank youby DJDavid - Debian