@bodhi, I was able to kwboot from this new u-boot but can't obtain an IP address :(by kiryl - uBoot
Hi Bodhi, wow, a lots happened during a night ^^" no, I didn't tried it yet. I saw all this conversation only this morning. I will try test it todays evening. FYI (including heychris) - Debian-3.13.1-kirkwood-tld-2-rootfs-bodhi.tar.bz2 image from this forum, seems to work with Stora kernel 3.9.6 compiled by johnou Stora_Kernel_3.9.6 ------------------------ As I wrote abovby kiryl - uBoot
hi bodhi, I'm doing this on Ubuntu x64by kiryl - uBoot
Guys, sorry for a little off top but I need some help here. For compiling binaries to arm I'm using 'arm-none-linux-gnueabi-' cross compiler. I know it works because I was able to recompile 3.9.6 kernel with added support for ext4 fs :D And now I have problems with compiling u-boot sources. I've made few changes in few files and know I want to check the results. But when Iby kiryl - uBoot
Hi Bodhi, can you please help me with something? at start please take a look at this guide - OpenStora Wiki - Compile the kernel. The author is using 'gitk' utility to obtain necessary patches, that later can be applied to kernel source for Netgear Stora. Would it be possible to use this utility for obtaining patches from this git - u-boot-marvell-ms2110 for the newest u-Boot?by kiryl - uBoot
Hi heychris, asuming your pendrive is formatted in ext2 or ext3, this should work :) setenv bootargs $(console) root=/dev/sda1 rootdelay=8 usb reset ext2load usb 0 0x200000 /boot/uImage ext2load usb 0 0x800000 /boot/uInitrd bootm 0x200000 0x800000 you forgot to load kernel image into memory, not sure if uInitrd is needed did you also take a look into "Install HowTo". if youby kiryl - uBoot