Ok, great news, my GFH is alive! But one problem is left - it won't boot with attached hdd. If i put the hdd after boot to the GFH everything looks good, but would be cool if it would boot with attached hdd. many thanks for yout great help so far!by egon0 - uBoot
U-Boot 2014.07-tld-2-uart-rescue (Oct 04 2014 - 17:28:55) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: nc Out: nc Err: nc Hit any key to stop autoboot: 0 GoFlexHome> :) nice work. arcNumber=3338 baudrate=115200 bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop;by egon0 - uBoot
U-Boot 2014.07-tld-2 (Oct 04 2014 - 13:48:16) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: nc Out: nc Err: nc :'-(by egon0 - uBoot
ok, no way to stop boot process by hitting any key...by egon0 - uBoot
I think my fault was missing one step, there is in your other thread somerhing like uboot default environment. its an img file. i should have flashed this. i think there are some old and now wrong envs... as said, will have a look at this later and will notify you if something interesting happended.by egon0 - uBoot
ok, i will try to hit "any" key :D constantly later this night. i will report what happens. another idea is to rewrite the preboot var from the old uboot new, maybe it will help. is there any chance to reset the new uboot config to the defaults from within a uart-sideloaded old uboot?by egon0 - uBoot
Problem is, the Netconsole config is f**ked up too. There is no netconsole at all. have lissened via tcpdump and wireshark directly connected to my gfh, no initial ping from the box (iirc it pings the nc-target-host and then starts the nc).by egon0 - uBoot
Hello, i have semi-bricked my Goflex Home. Updated uBoot and set up some wrong stuff in uBoot-Config. I have working UART, but all i see is: U-Boot 2014.07-tld-1 (Jul 18 2014 - 00:41:47) Seagate GoFlex Home SoC: Kirkwood 88F6281_A1 DRAM: 128 MiB WARNING: Caches not enabled NAND: 256 MiB In: nc Out: nc Err: nc looks like serial console is completely disabled... afterby egon0 - uBoot