IMHO That would not clutter the file /etc/rc.local does not need infoy and to simplify follow-up support Change the contents of the file /etc/rc.local ********************************** #!/bin/sh if [ -d /etc/startup_nas.d/ ]; then for file in /etc/startup_nas.d/*; do if [ -x $file ]; then . $file fi done fi *********************************** content : ----by balbes150 - Debian
megov Wrote: ------------------------------------------------------- > So, do you have any suggestions how to fix this > problem? If not difficult, check this variant. uImage and uInitrd https://yadi.sk/d/hnRWJlrYekMDu mainlineLinux=yes arcNumber=1680 bootcmd_usb=usb start; ext2load usb 0:1 0x800000 /uImage; ext2load usb 0:1 0x1100000 /uInitrd; bootm 0x800000 0x1100000;by balbes150 - uBoot
I got this result the file uboot.2014.07-tld-2.sheevaplug.mtd0.kwb is only a test $ ./kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2014.07-tld-2.sheevaplug.mtd0.kwb -p Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] 1 % [............................................................by balbes150 - uBoot
U-Boot Asus-NAS-M25 Doesn't support booting from SATA (HDD). There is only support for USB and NAND.by balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > balbes150, > > I think you should put the mtdparts definition in > the kernel command line (looks like it is not > currently). See if it will appear. > > > [ 0.000000] Kernel command line: > console=ttyS0,115200n8 user_debug=31 > :::DB88FXX81:eth0:none > I looked at theby balbes150 - Debian
bodhi Wrote: > > Not really. Kernel 3.16 patch was non-FDT. Are you > sure that device tree was executed and populated? > > ls -l /proc/device-tree/ > > PS. > > If you put mtdparts definition in the kernel > command line for 3.18, will it take? I'm not correctly described, after applying your patch and configuration, I also changed the configuby balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > Looking at the dmesg log, is this the ASUS-M25 > boot log or something else? > > Marvell DB-88F6281-BP Development Board > Yes. Out console Asus-NAS-M25. first log - download Asus from NAND the second and third log - download Asus from USB Debian Sorry for my English translation. FDTby balbes150 - Debian
Asus-NAS-M25 similar situation FDT cores, but the original U-Boot has the ability to boot from USB ext2\ext3 uImage and uInitrd. But this does not prevent normal operation of Debian. To make changes in U-Boot, you can use the system with non-FDT kernel (3.16 =<) and then move on FDT ? This is possible ? Part of the original log Reading data from 0x5ff800 -- 100% complete. 2by balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > balbes150, > > Execellent! great job, and thanks for sharing your > Asus-NAS-M25 successful installation. > > Could you attach the Asus-NAS-M25 DTS file here? > I'd like to include it in the patch for the next > release for general consumption. In this file, is not yet complete sectiby balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > Kernel 3.18.5-kirkwood-tld-1 package has been > uploaded. Please see 1st post for download link. > > > 2. Also new in the kernel are various kernel > configuration that are newly available in 3.18, > and also various kernel configuration per forum > users requests. > Thank you!by balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > Perhaps you will have better luck if starting with > rootfs 3.17? You could try my basic rootfs 3.17 as > an experiment to see how well the process will go. > If that goes well, you can upgrade your own rootfs > to 3.17 kernel before upgrading to jessie. > > BTW, I only meant to suggest a repostby balbes150 - Debian
Perhaps I am mistaken. Had the same error on the core linux-3.17.0-kirkwood-tld-1-bodhi.tar.bz2 . Edited by file .config the kernel. Steels work. 4134c4140 < # CONFIG_USB_EHCI_HCD_PLATFORM is not set --- > CONFIG_USB_EHCI_HCD_PLATFORM=y 4142,4146c4148,4151 < CONFIG_USB_OHCI_HCD=m < CONFIG_USB_OHCI_HCD_PCI=m < # CONFIG_USB_OHCI_HCD_SSB is not set < # CONFIG_USB_OHby balbes150 - Debian
bodhi Wrote: ------------------------------------------------------- > balbes150, > > Thanks! Looks like I've missed this during the > patch creation (it was created after the dtbs were > compiled). One more line should be added: > > arch/arm/boot/dts/Makefile > > + kirkwood-nsa320.dtb \ > + kirkwood-nsa325.dtb \ > If possiblby balbes150 - Debian
File linux-3.17.0-kirkwood-tld-1.patch arch/arm/boot/dts/Makefile kirkwood-nsa310a.dtb \ + kirkwood-nsa320.dtb \ perhaps skipped ? + kirkwood-nsa325.dtb \by balbes150 - Debian
This file does not work yet support MTD partitions.by balbes150 - Debian
The console is, the conclusion from it in the file, additional information on the Asus NAS-M25 launch Debian can be found on the forumby balbes150 - Debian
Thank you for the given materials. They helped run Debian 7 on Asus NAS-M25 with full equipment. ps Sorry for machine translation, , I do not speak English.by balbes150 - Debian