Hey Bodhi Thanks a lot!! Got it all sorted out. Netconsole is running properly on the plug now: thomas@thomas-GA-770T-USB3:~$ nc -lup 6666 192.168.1.2 6666 U-Boot 2015.07-3 (Sep 05 2015 - 21:45:03 -0600) Arch Linux ARM Pogo E02 gcc (GCC) 5.2.0 GNU ld (GNU Binutils) 2.25.1 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 6 USby Thomas Bollaert - uBoot
Hey Bodhi thanks for your help so far. I did as you told and got fw_setenv/printenv working. I also created the file /etc/fw_env.config with the line as you explained. However, for some reason I cannot seem to get output from netconsole. My u-boot config looks like this: # fw_printenv baudrate=115200 bootcmd=usb start; setenv letter 9;for type in usb; do for disk in 0 1 2 3; do ifby Thomas Bollaert - uBoot
Hi Bodhi Been to quick about it. See full bootlog below: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 250664K/262144K available (5805K kernel code, 428K rwdata, 1688K rodata, 264K init, 712K bss, 11480K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4by Thomas Bollaert - uBoot
Hello Bodhi I have the pogoplug E02 running, the pink one. Concerning your question about the installation I ran: Here we go again :roll: 1. Download a Linux Live CD (get kubuntu live cd, it's more like windows) 2. Burn and boot that cd on your PC (or use a USB flash drive, whatever works for you) 3. Connect the flash drive you want to boot from to this same PC 4.Go to K -by Thomas Bollaert - uBoot