Hi superelchi, I've got something like this nrg@XPS420:~/dpf/trunk/tools$ sudo ./identify.py /dev/sg7 Detecting & reading dpf flash... Opening generic SCSI device '/dev/sg7' Manufacturer: AMIC Unknown Manufacturer Got id[3]: 37, 30, 14 Unable to detect flash, just assuming 2MB size Size : 2 MB Reading 200000 bytes from flash... Flash written to fileby nrg-fv - Displays
Is there really no one able to help me? This is what I'm getting when trying to install mdadm nrg@NSA-325:~$ sudo apt-get install mdadm Reading package lists... Done Building dependency tree Reading state information... Done Recommended packages: default-mta mail-transport-agent The following NEW packages will be installed: mdadm 0 upgraded, 1 newly installed, 0 tby nrg-fv - Debian
Hi I've recently obtained Zyxel NSA-325 and I've managed to run Debian Jessie on it thanks to this site now I would like to use RAID 1 but I can't find any tutorial how to do it. I've never used RAID before so I was looking for some step by step procedure. So far I have found this article https://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-system-incl-grub2by nrg-fv - Debian
Hi bodhi, Thank you so much for your help! Yes that was my problem, I've merged the kernel with dtb by blindly coping and pasting commands from your post without truly understanding what they do. This teaches me in case of error to check all of the things from the beginning to the end as I was convinced the error was in the envs. Now I can finally try to set up a new Debian system on myby nrg-fv - uBoot
bodhi same thing I'm afraid :-( and yes I've checked that usb pen-drive is labelled rootfs U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:19:43 -0800) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB (ECC not enabled) WARNING: Caches not enabled NAND: 128 MiB In: serial Out: serial Err: serial Net: egiga0 PHY reset timed out MV88Eby nrg-fv - uBoot
Thank you bodhi, I've corrected the syntax error so now I have mainlineLinux=yes and I have removed rootfstype=ext4 from bootargs as you suggested, I still got kernel panic at the end, full log below. U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:19:43 -0800) ZyXEL NSA310 1-Bay Power Media Server SoC: Kirkwood 88F6281_A1 DRAM: 256 MiB (ECC not enabled) WARNING: Caches not enabledby nrg-fv - uBoot
Hello bodhi, Here are my envs NSA310> printenv CONTRY_TYPE=FF FEATURE_BIT=00 MODEL_ID=A203 PRODUCT_NAME=NSA-310 VENDOR_NAME=ZyXEL Communications Corp. arcNumber=4022 baudrate=115200 bootargs=console=ttyS0,115200 root=LABEL=rootfs rootdelay=10 rootfstype=ext4 bootcmd=run scan_usb; run usb_boot bootdelay=3 ethact=egiga0 ethaddr=XX:XX:XX:XX:XX:XX filesize=2bec30 kernel_addr=by nrg-fv - uBoot
Hello Bodhi, I've installed Debian-3.18.5-kirkwood-tld-1-rootfs-bodhi.tar.bz2 on pendrive and I have U-Boot 2015.10-tld-1 (Nov 06 2015 - 16:19:43 -0800) on my Zyxel NSA310. I don't have my original uboot env settings as I've lost them long time ago when I started messing up with my NAS. Recently I've bought a new hard drive and because of that I've upgraded uboot and Iby nrg-fv - uBoot