Hi, not at this point, sorry. But if you need me to use kwboot I can try to do that on my linux VM. What do you need me to do? I'll have some time later today, then I am off for the weekend.by Steve1987 - uBoot
I though we could share some knowledge among OS X users here, as some tf the tools use different syntax than its linux counterparts. Netcat works out of the box, for two-way communication run: nc -lu 6666 You might have to turn off stealth mode for u-boot to be able to ping your pc (although I think it might be possible to disable this requirement in envs). UART cable: Works ouby Steve1987 - uBoot
bodhi, correct me if I am wrong, but OS X and Linux are not binary-compatible. I tried running MickyWicky's binaries just in case though, and they don't run. MickyWicky, could you give me some pointers on compiling kwboot? I really want to do this :)by Steve1987 - uBoot
I am trying, but I only get: Please reboot the target into UART boot mode...\ I had to compile kwboot for my OS X from sources though. I got sources from your GitHub, what should I do apart from gcc kwboot.c -o kwboot, should I set any flags?by Steve1987 - uBoot
I've checked GPIO 34, 33 and 35 with similar results. Theoretically, what could happen if I just poke through all of them without a care in the world?by Steve1987 - uBoot
Would it help if I could provide you with complete source code for Zyxel 4.70? I got it today, but I am having a hard time reading it. It is open source, so I guess there is no exposure when giving it to others. Is uploading, I'll give you a link when it is done. Ok here is the link: https://drive.google.com/file/d/0B9LKKOOjI1e6VFE4dmFKOTI4UVE/view?usp=sharing And here is what Iby Steve1987 - uBoot
bodhi Wrote: ------------------------------------------------------- > Hi Steve, > > Join in the ongoing investigation in thisthread: > http://forum.doozan.com/read.php?3,23331 > > To confirm this is a 12V/5V issue, use a 2.5" HDD > on the 2nd slot. And boot up u-boot with serial > console. Interrupt serial console, and run > > ide reset > >by Steve1987 - uBoot