Hi all, my storage, during debian installation doesn't execute post bios. Please see the photo Iomega ix4-200d not execute post bios I've tried to connect via serial console with JTAG PL2303, but the console remains empty. I've used same JTAG with same connection in other iomega ix4-200d with successfull. Please help me. Best regards Francescoby maframan - uBoot
Hi, i don't have stock firmware installed in this moment. Is there any people who can do the tar of the stock firmware root? Best regards Francescoby maframan - uBoot
Hi all, i've installed, with Bodhi support, the Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 (Updated 20 Feb 2016), now my question is: the embedded display remains with Iomega Logo, is possible to display same informations such as that displayed with stock firmware? Regards Francescoby maframan - uBoot
Hi Bodhi, thanks a lot for your invaluable support. Best regards Francescoby maframan - Debian
Hi Bodhi, Is possible to manage embedded the display with this debian distro? Thanks and regards Francescoby maframan - Debian
Hi Bodhi, i've applied first option and work fine. Now for save the boot parameter in eeprom, what should I do? While for first box (bricked) also with the linux OS doesn't execute the u-boot installation via kwboot, the command remains in trying. root@ubuntu:/mnt/hgfs/SecureCRT# kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0.bin -p Sending boot message. Please reboot the targetby maframan - Debian
Hi Bodhi, i've received from my friend another iomega ix4-200d. In this storage is present usb command into u-boot environment. After i've configured the parameter in this mode: setenv usb_make_boot_args 'setenv bootargs console=ttyS0,115200 mtdparts=orion_nand:$(uboot_size)@$(uboot_start)(uboot),$(env_size)@$(env_start)(env),$(kernel_size)@$(kernel_start)(zImage),$(initrdby maframan - Debian
Hi Bodhi, is possible that my serial have problem because I run my ubuntu on VMWare? Maybe you should try without vmware, you say? Thanks and regards Francescoby maframan - Debian
Add process kwboot strace, (continuously the same info): select(4, [3], NULL, NULL, {0, 50000}) = 0 (Timeout) ioctl(3, TCFLSH, TCIOFLUSH) = 0 write(3, "\273\21\"3DUfw", 8) = 8 ioctl(3, TCSBRK, 1) = 0 select(4, [3], NULL, NULL, {0, 50000}) = 0 (Timeout) ioctl(3, TCFLSH, TCIOFLUSH) = 0 write(3, "\273\21\"3DUby maframan - Debian
Add other information found on /var/log/syslog on my ubuntu: Jun 16 00:22:21 ubuntu kernel: [ 1481.008195] pl2303 2-2.2:1.0: pl2303_vendor_write - failed to write [0008]: -110 Jun 16 00:22:21 ubuntu kernel: [ 1481.276319] pl2303 2-2.2:1.0: pl2303_vendor_write - failed to write [0009]: -110 Jun 16 00:22:22 ubuntu kernel: [ 1482.006906] pl2303 ttyUSB0: pl2303_get_line_request - failed: -110by maframan - Debian
Hi Bodhi, how long should the command? I've launched the command 1 hour ago and is it in execution in this mode: root@ubuntu:/mnt/hgfs/SecureCRT# kwboot -t -B 115200 /dev/ttyUSB0 -b mtd0.bin -p Sending boot message. Please reboot the target...\ Thanks and regards Francescoby maframan - Debian
Hi Bodhi, thanks a lot for your support but i think that my situation is different because when my nas start not execute any boot and the display remain blue without that appears the Iomega screen but remain blue only. It seems as if the PC does not exceed all of the hardware test. Today, i've deassembled this for search any jumper for CMOS reset but I found nothing. In other wordsby maframan - Debian