What could be a cause of issues with stock kernel image? printenv and help output is in attachment.by wwwalex - uBoot
Just tried booting "uboot.2016.05-tld-0.1.dns325.mtd0.kwb" Unfortunately, result is same.. original kernel doesn't boot with it. Alternative kernel (Alt-F free firmware project) boots up as normal. This is booting process with the original kernel and ramdisk: ## Booting kernel from Legacy Image at 00a00000 ... Image Name: Linux-2.6.31.8 Created: 2012-06-2by wwwalex - uBoot
I don't have any DNS-325 image to try, hence I'm asking for a help. Browsing internet, I found DNS-320 mtd0 image made by nanddump (it's attached here) When I'm booting this file with kwboot it works. But when I'm flashing it (tftpboot and then 'nand write ...') device doesn't start at all. Thanks.by wwwalex - uBoot
bodji, thank you for replying. For now, I want to boot stock firmware and therefore need stock u-boot image. I tried latest u-boot from ftp://ftp.denx.de/pub/u-boot/ but stock kernel hangs right after un-compressing. When I doing UART booting of DNS320 u-boot image, same kernel continues booting fine.by wwwalex - uBoot
Hi, Stupidly bricked my DNS-325 :( Could you please share mtd0 image with original u-boot from any Dlink DNS-325? (mine is RevA1) E.g. by running this: nanddump -f /tmp/mtd0-dump.bin /dev/mtd0 Than grab off /tmp/mtd0-dump.bin file from the device. Thank you in advance! P.S. Tried pulling out and compiling u-boot but it always hangs "Uncompressing Linux....... done" Notby wwwalex - uBoot