Hi bodhi, Now the initrd and vmlinuz will be available in /boot. And then do the mkimage for both uImage and uInitrd. Thx, ok - I'll try/do/check this it at the weekend. machnetzby machnetz - uBoot
Hi bodhi, > Have you created the Debian rootfs on USB or HDD > using this instruction (the USB Debian rootfs must > be plugged in before you reboot) : > http://forum.doozan.com/read.php?2,12096 > > QuoteUpdated 20 Feb 2016: > > This > Debian-4.4.0-kirkwood-tld-1-rootfs-bodhi.tar.bz2 > is to keep in sync with kernel > Linux-4.4.0-kirkwood-tld-1.by machnetz - uBoot
Hi there, I've been reading here for a long time and I dared yesterday to change the u-boot from 1.1.4 on one of my two NSA325v1. So I used a serial connection to my Mac and updated the u-boot as described in this article: http://forum.doozan.com/read.php?3,12381 With nandwrite the expected output was right: Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x2by machnetz - uBoot