Thanks setenv usb_boot 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x2100000 /boot/uInitrd; then bootm 0x800000 0x2100000; else bootm 0x800000; fi' setenv usb_set_bootargs 'setenv bootargs console=$console root=LABEL=rootfs rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts earlyprintk=serial' saveenv boot Woby celove2 - uBoot
Yes, you were right. I used to do something wrong. Now I see other errors. Please look: U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 (Re)start USB...by celove2 - uBoot
I did everything with root: sudo su **** See the screenshot. I have Ext3by celove2 - uBoot
Please, look: U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> setenv usb_boot 'mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/by celove2 - uBoot
Ok. Please look. U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> setenv usb_set_bootargs 'setenv bootargs console=$console root=LABEL=by celove2 - uBoot
Sorry U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> setenv usb_set_bootargs 'setenv bootargs console=$console root=LABEL=rootfs rootdeby celove2 - uBoot
Not work. Please look: U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> setenv usb_set_bootargs 'setenv bootargs console=$console root=by celove2 - uBoot
Ok. Please look: U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 u-boot>> printenv arcNumber=2097 baudrate=115200 bootcmd=usb start; run force_rescby celove2 - uBoot
I want to update the U-Boot. How to do it correctly for my model? Need uboot.2017.07-tld-2.sheevaplug.bodhi.tar ? Thanks. U-Boot 2011.12 (Feb 12 2012 - 21:33:07) Seagate FreeAgent DockStar SoC: Kirkwood 88F6281_A0 DRAM: 128 MiB WARNING: Caches not enabled NAND: 512 MiB In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stopby celove2 - uBoot
Thank you very much. You and I did it! Cool!by celove2 - Debian
WORK!!!! THANKS!!!! How i can save this boot configuration?by celove2 - Debian
POGO-P25 No WiFi module.by celove2 - Debian
Ok. Please look: U-Boot SPL 2013.10-tld-4 (Sep 07 2014 - 14:10:12) Boot device: NAND Attempting to set PLLA to 850 MHz ... plla_ctrl0 : 0000020a plla_ctrl1 : 00330000 plla_ctrl2 : 0065008b plla_ctrl3 : 000000f1 PLLA Set U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net:by celove2 - Debian
Tested on 3 Flash. NOT WORK :( Maybe problem in RAM memory? How can test memory in u-boot? Thanks.by celove2 - Debian
Ok. Please look. I download you Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2 And: celovec@Aspire-one:/$ sudo su password for celovec: root@Aspire-one:/# mkfs.ext3 -L rootfs /dev/sdb1 mke2fs 1.42 (29-Nov-2011) Filesystem label=rootfs OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 4890624 inodes, 19537408 blocks 976870by celove2 - Debian
I can not find you dropbox link. you can give it to me?by celove2 - Debian
I have 2 drives, 1 is a simple flash drive, for 1GB. USB 2.0 And the second drive is a box with a hard disk USB 3.0 The same error are on both flash drives I took a disk image here https://github.com/Juul/pogoplug-pro-debian/releases On Gparted formated and create ext3, label rootfs and extract: sudo tar xvjf /path/to/Debian-4.4.54-oxnas-tld-1-rootfs-bodhi.tar.bz2 Sorry for badby celove2 - Debian
Ok. Thanks. Hit any key to stop autoboot: 0 OX820> setenv custom_params 'earlyprintk=serial' OX820> boot starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Reset IDE: SATA PHY not ready for device 0 ide_preinit failed Partition Map for USB device 0 --by celove2 - Debian
Hit any key to stop autoboot: 0 OX820> printenv bootcmd=run bootcmd_uenv; run scan_disk; run set_bootargs; run bootcmd_exec; reset bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm 0x60500000 0x60e00000 0x62c00000; else bootm 0x60500000 0x60e00000; fi; else if run load_dtb; then bootm 0x60500000 - 0x62c00000; else bootm 0x60500000; fi; fi bootcmd_uenv=rby celove2 - Debian
I can not start. Help me please. Log: U-Boot 2015.10-tld-2 (Oct 21 2017 - 22:00:02 -0700) OXNAS OX820 DRAM: 128 MiB NAND: 128 MiB In: serial Out: serial Err: serial Net: dwmac.40400000 Hit any key to stop autoboot: 0 starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... 3 USB Device(s) found scanning usb for storage devices... 1 Storage Deviceby celove2 - Debian