To be honnest I've been successful with a given HD configuration (on a memory stick) but still with unsolved problem with other.... Strange... So please, could you publish your own results ? Marcby cuagn - Debian
davygravy Wrote: ------------------------------------------------------- > Mainline Minimalist Wheezy Installation via Debian Installer/Netboot > (right now this is for just PogoE02, Dockstar is essentially the same, minus the machid number > ...... > 2. Make sure you have a version of u-boot > installed that will work with 3.2 and newer > kernels, ie. it needs to be bby cuagn - Debian
I've found the solution here : http://lists.debian.org/debian-arm/2012/06/msg00006.html QuoteMartin Michlmayr The easiest way is to add root=/dev/sda2 to bootargs once in order to boot, and then run: update-initramfs -u in Debian to update the ramdisk.by cuagn - Debian
No, it's not a success story. I've an unsolved problem. Context : a Dockstar on which I installed first OpenWrt 2 years ago. The original Seagate Linux has been lost for a while. A couple of days ago, I reopen a project in order to install Debian. I reflashed u-boot with the one proposed in this forum (Here), because of the potential difficulties with Level2Cache. I setup a newby cuagn - Debian
dpffan Wrote: ------------------------------------------------------- > Why not try things from OpenOCD since you have > JTAG access? When you are done, flash to NAND from > uboot. I'm trying to find a solution, or at least to understand where is the problem, using different sources of information and forums. plugsapp, openocd, and doozan. Not excluding (as I'm frencby cuagn - uBoot
Same player shoot again ... tftpboot may be ? CE>> tftpboot mtd0 Using egiga0 device TFTP from server 192.168.1.22; our IP address is 192.168.1.45 Filename 'mtd0'. Load address: 0x0 Loading: *################################################################# ###################################### done Bytes transferred = 524288 (80000 hex) CE>> go 0x0by cuagn - uBoot
There is also the "bootm" command. Let's try it: CE>> bootm 0x800000 ## Booting image at 00800000 ... Bad Magic Number Nobody here with at least one idea ?by cuagn - uBoot
Context : I’ve a bricked Dockstar (over 4 re-flashed with OpenWrt) for a while and decided to reinstall mtd0 Uboot using JTAG (BusBlaster with OpenOCD) No problem to load Jeff Uboot image in memory (first part of the full process) but I faced difficulties when I wanted to test it before writing it in the flash memory. The normal process is described in plugapps. Basically : "1by cuagn - uBoot