bodhi, thanks again..filesystem was corrupted... works great now.by sammyE61 - uBoot
so here is what you asked for ;-) U-Boot 2017.07-tld-1 (Sep 05 2017 - 00:46:11 -0700) ZyXEL NSA320 2-Bay Power Media Server gcc (Debian 6.3.0-18) 6.3.0 20170516 GNU ld (GNU Binutils for Debian) 2.28 Hit any key to stop autoboot: 0 Reset IDE: Bus 0: ..........OK Bus 1: not available Device 0: Model: TOSHIBA HDWD130 Firm: MX6OACF0 Ser#: 18J9KDNAS Type: Hard Diskby sammyE61 - uBoot
Bodhi, Is it possible that the problem is the gpt partition of my hdd?? Serial bootlog isnt really helpfull because the process stops after the netconsole echo " server is alive" . If i use my usb rootfs it runs fine into debian login..by sammyE61 - uBoot
hi, i would like to boot my nas320 from sata. formated a drive (3 TB. one partition) in ext3 and labeld "rootfs"..extracted Debian... fw_setenv bootdev=ide... The nas load uboot 2017.07 and then only orange led blinking... what else must done for booting sata ?? fw_printenv bootcmd_exec=run load_uimage; if run load_initrd; then if run load_dtb; then bootm $load_uimage_addrby sammyE61 - uBoot
thank you man..works like a charm ;-)) youre best...by sammyE61 - uBoot
hi folks, i want to revive my old Nsa320 with Debian..but no luck. kwboot the uboot 2017.07. runs fine but booting debian ends up with kernelpanic :-( root@DebianWorkstation:~/Downloads/kwboot-tool# kwboot -t -B 115200 /dev/ttyUSB0 -b uboot.2017.07-tld-1.nsa320.mtd0.kwb -p Sending boot message. Please reboot the target...- Sending boot image... 0 % [.............................by sammyE61 - uBoot